Defence Statutory Bodies & Commissions/Committees Closing in 19 days TDR #58504582

Tender For Provision Of Icu And Ot At Mh Ahmednagar Under Ge (North) Ahilyanagar

Issued by Statutory Bodies & Commissions/Committees · Ahmednagar, Maharashtra
Tender Value
84.47 Lakhs
Estimated cost
Bid Submission
10 Dec 2026
19 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Icu And Ot At Mh Ahmednagar Under Ge (North) Ahilyanagar

BOQ

Name of Work:- PROVISION OF ICU AND OT AT MH AHMEDNAGAR UNDER GE (NORTH) AHILYANAGAR
Sl. No. Item Description
1Surface Excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft/ Loose soil all as specified.
2Excavation over areas not exceeding 1.5 M deep and getting out in Hard/dense soil all as specified.
3Excavation over areas exceeding 1.5 M and not exceeding 3 M deep and getting out in Hard/ dense soil all as specified.
4Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for pipe line or for manholes not exc 10 Sqm on plan in hard/dense soil and getting out all as specified.
5Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil all as specified.
6Removal of excavated material (soil) to a distance not exceeding 50 metre and dispositing where directed at a level not exceeding 1.5m above the starting point all as specified.
7Removal of excavated material (soil) to a distance exceeding 500 metre but not exceeding 1000 metre and dispositing where directed at a level not exceeding 1.5m above the starting point all as specified.
8M & L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified.
9M & L RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engr-in-Charge.
10M & L RCC M-30 (design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. complete all as specified and directed by Engr-in-Charge.
11M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
12M & L RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts etc. complete all as specified and directed by Engr-in-Charge.
13M & L RCC M-30 (design mix) using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts etc. complete all as specified and directed by Engr-in-Charge.
14M & L for Formwork to sides of pillars, posts, struts, piers, columns etc. complete all as specified and directed by Engr-in-Charge.
15M & L RCC M-25 (design mix) using 20mm graded crushed stone aggregate as Beams, cantilevers, bressummers, lintels over 1.5m span etc. complete all as specified and directed by Engr-in-Charge.
16M & L RCC M-30 (design mix) using 20mm graded crushed stone aggregate as Beams, cantilevers, bressummers, lintels over 1.5m span etc. complete all as specified and directed by Engr-in-Charge.
17M & L Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels cantilevers, shelves including supports complete all as specified.
18M & L RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in Chajjas etc. complete all as specified and directed by Engr-in-Charge.
19M & L Formwork to Formwork to chullah hoods, chajjas, troughs and similar items including edges including supports complete all as specified.
20M & L RCC M-25 (design mix) using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs complete all as specified and directed by Engr-in-Charge.
21M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.
22M & L TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified
23M & L TMT bars, 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified
24M & L Autoclaved Cellular (Aerated ) Concrate Block masonry shall be grade I marked. ( Min compressive strength 5 N/Sqmmm ) Density 651-750 kg /cum , IS: 2185 (Part 3 )& this blocks shall be laid using polymer modified and curing free Ready Mix Jointing mortar of joint thikness 3 mm to 4 mm , complete all as specified. Makes- Speed Dry Mix , DUBOUND, MAGIC BOND , BUILDWELL etc.
25Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built inCM 1:6 complete all as specified and directed.
26M & L for Rendering 15mm thick in CM 1:3 on other than fair face of brick work surfaces of wall, ceiling or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge
27M & L for Rendering 15mm thick in CM 1:4 on other than fair face of brick work or concrete surfaces complete all as specified and as directed by Engr-in-charge
28M & L for Rendering 10mm thick in CM 1:6 on other than fair face of brick work surfaces of wall, ceiling or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge
29M & L for Rendering 5 mm thick in CM 1:3 on other than fair face of soffits of brick work or ceiling of slabs etc complete all as specified and as directed by Engr-in-charge
30Supply only water proofing compound.
31S & F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified.
32S & F for Mild steel FI as in hold fasts and similar small articles fixed to chowkats, conforming Fe-290 Gde E-165, complete all as specified and directed by Engr-in-Charge.
33S & F 35mm thick 2nd class hard wood (kail) plain, framed, panelled door shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified.
34M&L 30mm thick second class hard wood (Kail) Glazed and Skelton shutters, open rebated and prepared to receive glass, gauge etc ( with out sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats complete, all as specified and directed.
35S & F 3mm thk sheet glass, ordinary Quality and glazing with oil putty in square n exc 0.5 sq. m in each pane etc. complete all as specified and as directed by Engr-in-charge.
36S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing
37S & F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20mm width shirk inside with solvent cement for stiles and plan colour PVC sheets for top rail, lock rai & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
38S & F for Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 150mm long, all as specified.
39S & F for Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 100mm long, all as specified.
40S & F for Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 250mm long, all as specified.
41S & F for Butt hinges, medium weight, cold rolled mild steel, 100mm long and fixed complete all as specified and as directed by Engr-in-charge
42S & F for Butt hinges, medium weight, cold rolled mild steel, 75mm long and fixed complete all as specified and as directed by Engr-in-charge
43S & F for Mild steel pressed handles, oval type, stove enamelled black, 150mm size, complete all as specified.
44S & F for Mild steel pressed handles, oval type, stove enamelled black, 100mm size, complete all as specified.
45M & L Moorum /red bajri filling in floors or paving laid in layers n exc,15 cm thick ,spread , levelled and rammed including watering.
46M & L Hard core of broken stone/boulders of gauge n exc 63mm deposited spreed and leveled in layers n exc 15cm thick watered and rammed to a true surface, complete all as specified.
47M & L for 100mm thick PCC 1:3:6 type C-2 (by using 40mm graded aggregate) as in base/sub base of flooring etc complete all as specified and as directed by Engr-in-charge
48M&L 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection surfaces finished even and fair, complete all as specified and as directed.
49Cement concrete type C-1 1:3:6 ( using 20mm graded aggregate) as plinth protection and paving 100 mm thick laid in slope finished even and air incl making joints at every 2.5m and at corger filled with bitumen 85/25 and sand in ratio1:2 weight and complete all as specified .
50M & L for two coat of oil bound distemper over a coat of chalk whiting on newly plastered surface of wall including preparation of surface etc. complete all as specified and as directed by Engr-in-charge
51M & L for two coat of oil bound distemper over a coat of chalk whiting on newly plastered surface of ceiling including preparation of surface etc. complete all as specified and as directed by Engr-in-charge
52M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint incl chalk whitening complete all as specified and as directed by Engr-in-charge
53M & L for two coat of synthetic enamel paint over one coat of pink primer on wooden surface of any description exc 10cm width or girth including preparation on new surface etc. complete all as specified and as directed by Engr-in-charge
54Framed work such as grills ,gratings etc with ends of bars shouldered or riveted or forged into spikes framed guard bars barred iron doors , ladder framed balusters walk ways railing framework of water tanks and similar work conforming to Fe 290 Gde-E-165 .Size (75 x75x8 mm )
55S & F for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
56S & F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperature 1.18 mm, fixed with wooden beads / tinned tacks or galvanised wire staples to steel / wooden frame,fixed in repairs, complete all as specified and directed.
57M & L for two coat of synthetic enamel paint over one coat of aluminium red oxide on steel surface of any description exc 10cm width or girth including preparation on new surface etc. complete all as specified and as directed by Engr-in-charge
58S & F Ball valves high pressure of 20 mm bore of pipe.PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs, Minium weight for ( 20mm - 210gm) complete all as specified and directed. Make :- Prayag or Symet
59S & F tube, 15mm bore, medium grade galvanised with all getting and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed by Engr-in-charge
60S & F for tube, 20mm bore, medium grade galvanised with all getting and fixed complete to wall and ceiling or laid in floors etc. complete all as specified and as directed by Engr-in-charge
61Supply laying and jointing Galvanised steel water tubing ,Heavy grade ,in any length with screwed and socket joint togeter with all galvanised steel fitting such as socket, elbow, bend, tee, reducers, unions caps plugs, nipples short piece etc. laid in trenches / floors etc. all as specified and directed for 25 MM dia .
62Supply laying and jointing Galvanised steel water tubing ,Heavy grade ,in any length with screwed and socket joint togeter with all galvanised steel fitting such as socket ,elbow ,bend ,tee, reducers ,unions caps plugs ,nipples short piece etc. laid in trenches / floors etc. all as specified and directed for 40 MM dia .
63Supply laying and jointing Galvanised steel water tubing ,Heavy grade ,in any length with screwed and socket joint togeter with all galvanised steel fitting such as socket, elbow, bend, tee, reducers, unions caps plugs, nipples short piece etc. laid in trenches / floors etc. all as specified and directed for 50 MM dia .
64S & F for Rotational moulded polyethylene 1000 ltr capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
65S & F for 15mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc. complete all as specified and as directed by Engr-in-charge
66S & F for pillar taps 15mm dia cast copper alloy with capstan heads chromium plated, screwed down high pressure, with or without letted 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc. complete all as specified and as directed by Engr-in-charge
67S & F for stop valves 15mm bore dia cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc. complete all as specified and as directed by Engr-in-charge
68S & F for gate valve, 20mm bore dia or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-charge
69S & F PVC connection 15mm x 450mm including brass check nut at both ends screwed for iron pipe of 15mm pipe.complete all as specified and as directed by Engr-in-charge
70M & L for Asbestas cement pipe in as any length with cement joints fixed to walls 100mm complete all as specified .
71S & F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed by Engr-in-charge
72S & F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in floors complete all as specified and as directed by Engr-in-charge
73PVC (SWR) reducer 110 mm bore, fixed in repairs, complete all as specified and directed.
74S & F for 110mm dia PVC (SWR) bends complete all as specified and as directed by Engr-in-charge
75S & F for slotted vent cowl 100mm complete all as specified and as directed by Engr-in-charge
76M & L for 75 mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge
77M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engr-in-charge
78S & F Nahani traps 100mm dia with grating including jointing to waste pipe with run lead jointed and setting/fixed in cement concrete type B-1 1:2:4 fixed in repair complete all as specified and directed.
79S & F for soap nitch type fixed to lpug with chromium plated brass screw complete all as specified and as directed by Engr-in-charge
80S & F for Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engr-in-charge
81S & F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engr-in-charge
82S & F for PVC waste pipe 32mm dia PVC flexible with plastic check nut for WHB and sink complete all as specified and as directed by Engr-in-charge
83S & F for Wash basins, Vitreous China (flat back or angle back type) of size 550 x 400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe including fixing in marbel top as directed by Engr-in-charge
84S & F for wash down Water Closet vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engr-in-charge
85Vitreous China Urinal, Half stall type, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engr-in-charge
86S & F for PVC valveless, syphonic action type, flushing cistern 10 litres capacity low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engr-in-charge
87S & F for 20mm dia aluminium power coated curtain rods for pelmet and complete all as specified and as directed by Engr-in-charge
88M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed rendering in CM 1:4 complete all as specified and as directed by Engr-in-charge
89M & L for Glazed Ceramic coloured tiles in vertical surface (skirting/dado) 350 x 250x 7mm / 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick rendering in CM 1:4 complete all as specified and as directed by Engr-in-charge
90M & L for 20-25mm thick Machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of theslab including rubbing and polishing complete including 15mm thick screed rendering in CM 1:4 complete all as specified and as directed by Engr-in-charge
91M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed rendering in CM 1:4 complete all as specified and as directed by Engr-in-charge
92M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray cement and pigment over 20mm thick screed bed or beding in CM 1:6 etc. complete all as specified and as directed by Engr-in-charge
93M & L for 20-25mm thick Machine cut kota stone on vertical surface such as skirting/ dado over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of theslab including rubbing and polishing complete including 10mm thick screed rendring in CM 1:4 complete all as specified and as directed by Engr-in-charge
94Cutting into existing manhole for connecting new drains making good to pipes & rendering, cutting out existing benching & forming branch channel 01, ½ round or ¾ section in PCC 1:2:4 type B1, smooth finished for 150 mm bore pipe complete all as specified and directed.
95150 mm internal dia reinforced cement concrete pipes of approved make , class NP2, laid and jointed in cement mortar with collars (PCC shall be measured and paid for seperately under respective item) complete all as specified & directed.
96M & L for APP based polymeric membrane mim wt. 3 kg/Sqm & mim 3mm thk R/F with polyster non wove fabric (wt. not less than 150gms/Sqm) land on primed surface by forced application & two coat of aluminium paint over APP membrane laid over roof complete all as specified.
97Material and labour for Fire Alarm Sounders / Sirens Electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 metres with sound output variation of + 5 DB 2000 m range complete all as specified and as directed.
98Material and labour for wiring for circuit /sub main wiring alongwith earth wire with size 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire, FRLS PVC insulated, sheathed, multistranded copper conductor, single core cable in surface / recessed as required and including steel conduit , junction boxes /accessories complete all as specified and directed. Please Enable Macros to View BoQ information
99Material and labour for wiring for circuit /sub main wiring alongwith earth wire with size 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire, FRLS PVC insulated, sheathed, multistranded copper conductor, single core cable in surface / recessed as required and including steel conduit , junction boxes /accessories complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58504582
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 84.47 Lakhs
LAST DATE 10-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of Icu And Ot At Mh Ahmednagar Under Ge (North) Ahilyanagar
Basic Detail
Tender No 88688/E8
Bidding Type Tender
Location
City Ahmednagar
State Maharashtra
Key Dates
Publish Date 12 Nov 2026
Submission Date 10 Dec 2026
Open Date 12 Dec 2026
Finance
Tender Value 84.47 Lakhs
Tender Fee 1000
EMD 1.52 Lakhs
Exemption Available
Document List
88688TENDERDOCSALL.pdf
96a9e2bb-d9f8-4fe2-9b2e-8450fd34c157.html
BOQ_895373.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 19 days
Dec 12, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 21 days

Tender Documents

Download All (ZIP) ↓
pdf

88688TENDERDOCSALL.pdf

html

96a9e2bb-d9f8-4fe2-9b2e-8450fd34c157.html

xls

BOQ_895373.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender