Tender For Provn Of Pol Store And Allied Works For Af Section At Afs Kumbhirgram.
Tender Value
9.69 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
19380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lunglei → Mizoram
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Pol Store And Allied Works For Af Section At Afs Kumbhirgram.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth for foundation etc or for cess well cess pits man holes pier holes etc n.exc 10 sqm on plan n.exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed. |
| 2 | All as per item No. 2.00 depth exc 1.5m but n. exc 3.00m and -ditto- |
| 3 | Material and labour for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed. |
| 4 | Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete complete all as specified and directed. |
| 5 | Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 6 | Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 7 | Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in chajja complete all as specified and directed. |
| 8 | Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 9 | Material and labour for reinforced cement concrete M-25 (Design Mix) (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 10 | Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed. |
| 11 | Material and labour for form work to pillars, posts, struts, piers, columns and stanchions with rough finished square, rectangular, or polygonal surfaces of concrete complete all as specified and directed. |
| 12 | Material and labour for form work to sides and soffits of floor or roof beams, slab, girders, bres-summers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. with rough finished flat surfaces of concrete complete all as specified and directed. |
| 13 | Material and labour for form work to chullah hoods, chajjas,troughs and similar items including edges with rough finished flat surfaces of concrete complete all as specified and directed. |
| 14 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 15 | All as per item No 14.00 above but 6mm to 10mm dia for stirrups, spacer, binders and -ditto-. |
| 16 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 17 | Material and labour for hardcore of broken stone or boulder of gauge n.exc 63mm, deposited, spread and leveled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 18 | Materials and labour for sand filling under floors including watering and consolidation complete all as specified and directed. |
| 19 | Supply and fix polythene film, black, 150micron laid in floors complete all as specified and directed. |
| 20 | Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 21 | Material and labour for 30mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 22 | Material and labour for 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 23 | Material and labour for 10mm thick rendering in cement mortar (1:4) as in verticle surface/ skirting / dado complete all as specified and directed. |
| 24 | Material and labour for machine cut Kota stone slab in vertical surface 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in dado/ skirting complete all as specified and directed. |
| 25 | Material and labour for machine cut Kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | Material and labour for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 27 | Removing excavated material (soil) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 28 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed. |
| 29 | Material and labour for 10mm thick rendering in cement mortar (1:6) on fair faces of brick work and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 30 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work in two layers, first layer of 10mm thick and top layer of 5mm thick with using water proofing coumpound (WPC) @ 2% weight of cement or as per manufacturers instruction and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 31 | Supply only integral water proofing compound complete all as specified and directed. |
| 32 | Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed. |
| 33 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 34 | Material and labour for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 35 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 36 | Material and labour for 15mm thick rendering in cement mortar (1:4) with using water proofing coumpound (WPC) @ 2% weight of cement or as per manufacturers instruction on roof top and finish the surfaces even and smooth without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately under respective item. |
| 37 | Material and labour for water proofing treatment to RCC roof surface comprising with the following course of treatment/specifications from bottom to top :- (a) Applying cold bituminous primer @ 0.30 liters per sqm confirming to IS 3384 over plastered surfaces of roof.(b) One layer of APP based polymeric membrane 3mm thick, weight not less than 3.50 kgs per sqm, reinforced with non woven polyester matt central core fabric (weight not less than 160 GSM) and coated on both side with and including layer of APP modified bitumen and finished with and including micro-prefabricated heat fusible polythene film on both surfaces. (c) Finally applying two coats of bituminous aluminum paint @ 0.10 ltrs per sqm per coat on top surface.Note:-(i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions. (ii) A minimum overlap of 100mm and 75mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instructions. Make of APP membrane:- Super Thermolay of M/s STP Ltd, Hyperplas of M/s IWL India Ltd, Hydrostop of M/s Tiki Tar Danosa (India) pvt ltd, , M/s FOSROC Chemicals, Smartcare APP membranes of M/s Asian Paints Ltd. |
| 38 | Material and labour for anti-termite treatement for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed. |
| 39 | Material and labour for anti-termite treatement for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 40 | Supply and fix steel rolling shutters, thickness of laths in 1.25mm, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed. |
| 41 | Supply and fix safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 42 | Supply and fix ball bearing for rolling shutters complete all as specified and directed. |
| 43 | Supply and fix 50 mm bore MS pipe (heavy grade) with all fitting and fixed complete to walls and ceilings complete all as specified and directed. |
| 44 | Material and labour for cast iron work grade FG-150, machined, in pulleys and similar articles (articles n. exc 5 kg each) complete all as specified and directed. |
| 45 | Materials and labour for cutting holes in brick walls bulit in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate ) as required depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc. one brick complete all as specified and directed. |
| 46 | Supply and fix mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 47 | Material and labour for structural steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250 quality-A) complete all as specified and directed. |
| 48 | Supply and fix structural steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-410 W (Gde E-250) quality-A complete all as specified and directed. |
| 49 | Material and labour for RCC (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 50 | Material and labour for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in ramp including finishing the concrete surface even and rough complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | Material and labour for 100mm thick PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in ramp including finishing the concrete surface even and rough complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender