Defence Statutory Bodies & Commissions/Committees Closing in 13 days TDR #58504563

Tender For Comprehensive Maintenance And Allied B/R Work In Charari, N-2 Road, Kajikhera, Subhash Road, Ncc And Jk Enclave At Afs Chakeri Kanpur

Issued by Statutory Bodies & Commissions/Committees · Kanpur Nagar, Uttar Pradesh
Tender Value
35 Lakhs
Estimated cost
Bid Submission
04 Dec 2026
13 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Comprehensive Maintenance And Allied B/R Work In Charari, N-2 Road, Kajikhera, Subhash Road, Ncc And Jk Enclave At Afs Chakeri Kanpur

BOQ

Name of Work:- COMPREHENSIVE MAINTENANCE AND ALLIED B/R WORK IN CHARARI, N-2 ROAD, KAJIKHERA, SUBHASH ROAD, NCC AND JK ENCLAVE AT AFS CHAKERI KANPUR
Sl. No. Item Description
1Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
2M&L Coloured Glazed ceramic tiles(350x250)x7 mm/ (450x350)x7mm thick or as required size of 7 mm thick vertical surface as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 10mm thick cement plaster in CM 1:4 complete all as specified and directed.
3M& L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick(1:6) Screed bed or bedding layer for laying floor finishes complete all as specified.
4Dismantling stone slabs and tiles of any description or thickness, laid, bedded and pointed in any mortar as in floors, aprons etc complete all as specified and directed.
5M & L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps jambs, pillars, window cills cooking platforms and like in CM (1:4) over and including screed bed 15mm thick CM (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, cutting and moulding edges complete all as specified and directed.
6M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing cutting ,grinding and polishing to achive mirror finish complete etc over 15mm thick screed bed in CM 1:6. complete all as specified and directed.
7ditto as per item serial No 6 here-in-before but as in skirting/dados/steps/riser/tread of stair case etc or similar work over 10mm thick cement plaster in CM 1:4 complete all as specified and directed.
8M&L for reparing of ceiling,RCC chhajja, roof projection, facies and exposed reinforcement portion area n.exc 1.5 sqm each and thickness of RCC n.exc 200mm applying FOSROC NITOCOTE AP35 latex acyrlic based emulsion to exposed reinforcement and applying one coat of cement slurry & filling the cement concrete (1:2:4) type B0, 12.5 mm graded stone aggregate at damaged concrete surface and finish the surface with 5mm thick cement sand mortar (1:3) & applying two coats of cement base paint on finished surface complete all as specified and directed.Note : Bidder shall be considred height of bldgs upto 6th storey while quoting rates by them and wherever scaffolding is necessary.
9Dismantling of existing sunken treatment and M&L for 50mm (minimum) thick PCC M20 ( nominal mix) using 12.5 mm graded stone aggregate mixed with water proofing compond@ 3 % by weight of cement with proper slope towards spout on RCC slab and 15 mm thick plaster in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on vertical faces when PCC is still green. After laying of PVC (SWR) pipe 75/100mm dia as per site requiement & fittings ,2 coats of polymeric based chemical shall be applied and tested by ponding. After testing sunken portion shall be filled with PCC 1:5:10 type E2 using remaining depth of surface aggregate including 25 mm thick cement concrete type B0, 1:2:4, (using 12.5 mm graded aggregate) as in sub base for floor complete all as specified & directed.(NOTE- 1.The sunken slab shall be laid to a slope of 1:40 outwards CI/GI pipe& fittings ( as per site reqirement )spout (HDPE Pipe of dia 40mm) projecting at least 200 mm beyond outer face of wall. 2.Note- Only plan of the floor area shall be measured and paid.3. Bidder shall be considred height of bldgs upto 6th storey while quoting rates by them .4.Sunken treatment shall be done by Authorized dealer of the manufacturer and contractor shall submit Gurantee certificate shall be issued by the manufacturer.
10M& L repair to chajja area n exc 1 sqm each including plaster in CM(1:3) or PCC type B0 (1:2:4) (using 12.5 mm stone aggregate) on top benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed.
11M& L repair to chajja area exc 1 Sqm and n exc 2 sqm each including dismantling of upward facia,cutting of reinforcement , plaster in CM (1:3) or PCC type B0 1:2:4 (using 12.5 mm stone aggregate) on top , benching/haunching, repair to broken plaster with dubbing coat complete all as specified and directed
12Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
13Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) →
14M&L RCC (1:2:4) (Nominal Mix) Type B1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
15Mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
16Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc complete all specified and directed.
17M&L for rendering 15 mm thick in CM ( 1:6 ) plaster on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.
18M&L for rendering 15 mm thick in CM ( 1:4 ) plaster on wall/ concrete surfaces , finished even and without using extra cement complete all as specified and directed.
19M & L rendering 10 mm thick on fair faces/irregular faces of concrete surfaces as on ceiling in cement plaster 1:3, including finished even and smooth without using extra cement, including taking down complete all as specified and directed.
20M & L preparation of new surfaces and applying three coats of white wash on ceiling required complete all as specified and directed.
21M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 2 mm thick wall care putty approved quality , all as specified and directed.
22M&L preparing new plastered surface of wall and applying two coat of cement base paint over coat cement primer complete all as specified and directed.
23Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-in-Charge.
24M&L PCC (1:3:6) type B-1 using 20 mm graded stone aggregate as surfaces channel and drains.
25Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and directed.
26M&L for Brickwork with subclass ‘B’ bricks, in CM 1:6, straight or curved on plan exc 6metre mean radius built in
27All as per item No 26 above but except bricks.
28Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore.
29All as per item No28 above but 20mm bore of pipes.
30S& F of CPVC pipes OUTER DIAMETER 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors .CPVC pipes as per IS:15778 are produced in Standard Dimensional ratios SDR 11 Pressure bearing capacity of SDR 11pipes @23°C is 28.12kg/cm² & at @82°C 7.03kg/cm² includes all plain CPVC fittings and pipe cutting fixing with CPVC solvent cement complete all as specified and directed.
31S&F of CPVC pipes OUTER DIAMETER 16mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors .CPVC pipes as per IS:15778 are produced in Standard Dimensional ratios SDR 11 Pressure bearing capacity of SDR 11pipes @23°C is 28.12kg/cm² & at @82°C 7.03kg/cm² includes all plain CPVC fittings and pipe cutting fixing with CPVC solvent cement complete all as specified and directed.
32S & F OUTER DIAMETER 20 mm SDR 11 fittings CPVC fittings OF brass (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor, Unions, Ball valves, Flange,gate valve and tank adaptor etc).fixed all specified and directed.
33S & F OUTER DIAMETER 16 mm SDR 11 fittings CPVC fittings OF brass (Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor, Unions, Ball valves, Flange,gate valve and tank adaptor etc).fixed all specified and directed.
34S&F 15 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc at any position (i.e concealed) complete all as specified and directed.
35S&F 20 mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in floors including cutting threading and making forged bends on pipes MS hooks etc any position (i.e concealed) complete all as specified and directed.
36Cutting chases, pinnng in,brick walls making good to faciing where required and pointing in cement mortar (1:3) for concealed water tubing, and crossing one side of wall to another side by cutting or drilling exceeding 10 cm but not exceeding 50 cm girth complete all as specified and directed.
37S&F in repair gun metal globe or gate valve for 15 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and as directed.
38S&F in repair gun metal globe or gate valve for 20 mm bore pipe with iron wheel and screwed both ends for iron pipes complete all as specified and as directed.
39S&F in repair kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall as with fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm complete all as specified and as directed.
40S&F in repairs PVC flushing cistern push button / handle type of 10 ltr capacity , coloured complete with all fitting fixed to with WC including PVC flush pipes ,brackets complete all as specified and directed.
41S&F in repair vitreous china squatting pan `Orissa ' pan pattern size 580x440mm white `P' or `S' trap front back inlet ( excluding flushing cistern and flush pipes) complete all as specified and directed.
42S&F in repair vitreous china wash down water closet pedestal pan white excluding flushing cistern and flush pipes complete all as specified and as directed .
43S&F in repair PVC connection 15mm size with PTMT nuts of length 600 mm long complete all as specified and directed.
44S&F in repairs for plastic water closet seat cover colour/ white, closed pattern with flat bottom and MS CP or aluminised hinging device as in repair complete all as specified and directed.
45S&F in repair aluminium anodised tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed .
46S&F in repair 32 mm waste coupling of PTMT half or full threaded min minimum weight not less than 45 gram complete all as specified and directed .
47S&F in repairs 40mm CP waste coupling for steel sink complete all as specified and directed .
48S&F in repairs PVC waste pipe 32/40 mm dia, 800 mm long, complete all as specified and directed,
49S&F in repair 125mm/ 150mm dia PTMT grating with or without waste hole fixed on floor trap / nahni trap with white cement complete all as specified and directed
50S&F in repair vitreous china wash basin white round back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-charge.
51S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed in position complete all respect as specified.
52S&F in repairs internal flushing kit of PVC low level flushing cistern and making functional complete all as specified and dircted .
53S&F in repair of 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight 142 gms).complete all as specified and directed
54S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minimum weight 210 gms).complete all as specified and as directed
55S&F in repair 500 ltr rotatational moulded polyethylene white colour water storage tanks(cylindrical vertical with closed top) triple layered construction, fixing arrangement to screwed the lid cover, ISI mark hoisted& fixed in position complete all as specified and directed
56S& F in repairs pillar taps 15 mm dia of PTMT any colour scewed for iron pipe ans fixed (Min Wt 110 Gms).complete all as specified and directed.
57S&F in repairs stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms) complete all as specified and directed.
58S&F in repairs angle stop valves 15 mm dia of PTMT any colour high pressure screwed for iron pipes (Min Wt 90 Gms) complete all as specified and directed.
59S&F PVC lid for water storage tank suitable for 500/1000 ltr capacity complete all as directed.
60S& F in repair MS kitchen sink/WHB bracket as fixed in CM 1:3 or PCC 1:2:4 type BO complete all as specified and directed.
61S&F in repairs Bib taps standard of PTMT,15 mm dia any colour screwed for iron pipes (Min Weight 90Gram), complete all as specified and directed.
62S&F in repair 15 mm bore Swivel shower of PTMT any colour for fixing with15mm pipe .(Minimum weight 40gram) complete all as specified and directed.
63Cleaning and removing all scale and dirt,etc from tanks and from mouths of circulating pipes, etc capacity exe 250 lt but nexe 500 lt,complete all as speified.Note-Date of cleaning should be mentioned over each tank by synthetic enamel paint complete all as specified and directed.
64S&F in repairs 15 mm bore Bib taps,chromium plated cast copper alloy with fancy type crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.
65S&F in repairs 15 mm bore Stop valves, chromium plated cast copper alloy,with fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all specified and directed.
66S&F in repairs 15mm bore fancy type pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes and fixed. Make- Prayag or Cera/Essco/Perryware
67S&F in repairs fancy type chromium plated bib cock 2-way double handle with flange of complete all as specified and directed.
68Dismantling of cast iron pipes of dai 100mm or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches,wall floor etc up to 6th story of buildings complete all as specified and directed
69S&F cast iron spun pipes of 100 mm dia waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floor or in wall up to 6th story of building complete all as specified and directed
70M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bed block for fixing of angle iron post, hold fast and the similer work complete all as specified and directed
71Taking down chowkats or frames exceeding 1.5 sqm each but not exceeding 4.00 Saqm each with shutters (without taking off shutters from the frame), and removing from site complete all as specified and directed.
72Taking down shutter exc. 1.0 Sqm and not exc.2.0 Sqm all as spd & directed.
73M&L for supply and fixing of for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
74M&L for supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm for double shutter door comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
75M&L for supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) Please Enable Macros to View BoQ information
76M&L for supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58504563
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 35 Lakhs
LAST DATE 04-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Comprehensive Maintenance And Allied B/R Work In Charari, N-2 Road, Kajikhera, Subhash Road, Ncc And Jk Enclave At Afs Chakeri Kanpur
Basic Detail
Tender No GE (AF) BR/CHK/T-29 OF 2026-27 8612/A/E8
Bidding Type Tender
Location
City Kanpur Nagar
State Uttar Pradesh
Key Dates
Publish Date 12 Nov 2026
Submission Date 04 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 35 Lakhs
Tender Fee 500
EMD 70000
Exemption Available
Document List
a577f2b5-ad94-4d45-bde7-b099161fd1c8.html
BOQ_895720.xls
tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 20 days

Tender Documents

Download All (ZIP) ↓
html

a577f2b5-ad94-4d45-bde7-b099161fd1c8.html

xls

BOQ_895720.xls

pdf

tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender