Defence Statutory Bodies & Commissions/Committees Closing in 12 days TDR #58504560

Tender For Repair To Compound Wall, Fencing And Approach Path, Reinforced Cement Concrete And Wpc Jallies Anuj Nayyar Vihar And Polo Road Messes (Garuda, Asc, Iml, Aad), Sw Comd Hut, S Comd Hut In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
49 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair To Compound Wall, Fencing And Approach Path, Reinforced Cement Concrete And Wpc Jallies Anuj Nayyar Vihar And Polo Road Messes (Garuda, Asc, Iml, Aad), Sw Comd Hut, S Comd Hut In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10

BOQ

Name of Work:- REPAIR TO COMPOUND WALL, FENCING AND APPROACH PATH, RCC AND WPC JALLIES ANUJ NAYYAR VIHAR AND POLO ROAD MESSES (GARUDA, ASC, IML, AAD), SW COMD HUT, S COMD HUT IN THE AREA OF AGE B/R-II UNDER GE (EAST) DELHI CANTT-10
Sl. No. Item Description
1Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
2M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.
3Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed.
4M&L for rendering 15 mm thick in cement mortor 1:4 on brick/ concrete surfaces and finishing the surface even and fair without using extra cement complete all as specified directed.
5M&L for prepration of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of Primer complete all as specified and directed .
6M&L 10-12mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair/unfair faces of brick work or concrete surfaces & finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.
7M&L for prepration of New/Old plastered surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces. complete all as specified and directed.
8Preparation of new steel and iron surfaces of any description over 10cm in width or girth, priming with a coat of red oxide primer and applying two coats of synthetic enamel paint complete all as specified and as directed.
9Preparation of old steel and iron surfaces of any description over 10cm in width or girth , priming with a coat of red oxide primer and applying two coats of synthetic enamel paint complete all as spd
10M&L for Mild Steel angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E, complete all as directed by Engr-in-Charge.
11S&F in Repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and staining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc, (each line wire to be measured) complete all as specified and directed.
12Supply, laying and fixing of galvanised punched tape concertina coil of 450mm diameter of each round/roll, complete having glavanised spring steel core wire 2.5mm dia cold drawn steel, galvanised, punched of low carbon steel having series of sharp barbs uniformly punched alongwith its length 550 Nos, barbs on periphery per revolution, crimped on steel spring core wire (stretchable length 6 meter Appx) weight 8 kg of each coil all as complete, incl dismantling of existing coil of any type all as specified and directed by Engr-in-Charge.
13S&F in repair/replace factory made steel fibre reinforced (SFRC) Drain covers conforming to IS-12592 without frames incl necessary hold fast/hooks of (Heavy duty) 600x450x70mm rectangular complete all as specified.
14S&F factory made steel fibre reinforced (SFRC) man holes covers conforming to IS-12592 with frames incl necessary hold fast/hooks (medium duty) of 600 mm dia or rectangular of equivalent area complete all as specified.
15S&F factory made steel fibre reinforced (SFRC) man holes covers conforming to IS-12592 with frames incl necessary hold fast/hooks (medium duty) of 900x450x70 to 80mm thick rectangular area complete all as specified.
16Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
17M&L for Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. of Gde Fe-290, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed.
18S&F 1.00 mm thick plain black mild steel sheet in hearths; covering to door shutters; covering to doorchowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required incl priming complete all as specified and directed.
19Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and as directed.
20S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 MPA as in roof covering/cladding to wall as view cutter, fixed with self tapping screws, complete all as specified and directed.
21Dismantling fencing wire mesh, any type complete all as specified and as directed.
22Supply only MS galvanisd Chain link fencing, any size or type complete all as specified and as directed.
23Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified.
24S&F 10mm round bars of gread Fe-410-W (Part I) (Gde.E-250) quality-A or Fe 290 (Gde -E-165) for tying /tightening wire mesh complete all as specified and directed.
25Excavating in any type of soil in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface
26S&F of RCC Precast Concrete Post (M-30) of size 150mm X 150mm X 2435mm height having two grooves of size 50 X 30mm, so as to receive 6 Nos. including Provn of 6 Nos of Precast concrete RCC Panels between Two post of size 1500mm X 300mm X 40mm thickness The post is reinforced with 4 Nos. 8mm dia Tor Bars with 4mm dia stir-ups @ 1.615m centre to centre150mm c/c; Panels are reinforced with 3 Nos. longituddinasl bar of 8mm dia Tor steel & 6mm plain M.S Stir ups @ 150mm c/c. Manufactured by M-30 graded of concretes complete all as specifed and as directed. Note :- (a) Above ground level height will be measured for payment purpose. (b) Rate of excavation of post holes for fixing of Columns inculding in this item. (c) The post may be fixed to the ground by digging a hole of 500 x500 x600mm and filled with 1:3:6 concrete after the post has been aligned in these holes & The post will be erected @ 1.615 m center to center. Make- Kreative concrete company or equivalent as approved by GE.
27Demolition concrete of cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level complete all as specified and as directed.
28M&L in repair for providing precast cement concrete louvers and jallies, 35 mm thick type B0, 1:2:4 using 12.5mm graded stone aggregate (measured solid) including all moulding and necessary form work and set in cement mortar 1:4, complete all as specifed and as directed.
29S&F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.
30S&F Machine pressed precast concrete interlocking glazed paver block with grey cement and pigment of any shape and size conforming to IS 15658 - 2006 of 60 mm thickness and M-35 grade including 50 mm sand cushion including packing joints etc complete all as specified and directed.
31M&L for Rubber moulded PU coated Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed with grey cement and pigments and pointed in neat cement slurry icluding 15mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.
32M&L 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in Sub base to receve floor finishes etc, complete all as specified and directed.
33M&L for cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate as in coping and similar works including necessary form work complete all as specified.
34M&L for preparation of new/old stone/ concrete surface of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paints over priming paint plaster complete all as specified and directed.
35Grit wash on new/old (after taking down old plaster) stone wall or brick surfaces of walls including raking out joints, hacking for key and scrubbing down with water complete with M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement 1/2 coarse sand and 2 stone chipping 10mm nominal size) in pannels inculding grooves all aroud as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified and directed.
36Dismantling of old RCC jalli & S&F 18mm solid WPC (Wood polymer Composite) jali with frame fixing on wall or wall cladding, combining WPC board with frame of wpc, 100% Solid WPC Jali of required length and width, comprising of virgin PVC resin of K Value 58-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from single Extrusion process, WPC foam board with having minimum density 600 kg/cbm and WPC frame with having minimum density 650 kg/cbm manufactured as per an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. For WPC Railing WPC Jali to be fixed with wpc frame of size 75x45mm with necessary supporting lengths at verticle as well as horizontal. At wall frames to be fixed with 100x8 fastners to support vetically frame lengths including all fixing assecerories, moulding, corner beads complete all as specified and as directed by Engr-in-Charge.
37M&L for Parking tile /Out Door coloured ceramic tiles 10 to12mm thick (square/rectangular) area of each tiles exceeding 0.09 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 & dismantling old tile complete all as specified
38S&F Double side writing informatory stainless steel (304 grade) reflecting Sign Boards size 4'x2.5' having with Aluminium sheet base of 2mm thickness having retro reflective tape base and colour and matter both side of sign board will be furnished by Engr-in-Charge.The frame of Sign board shall be 30mmX30mm Square stainless steel pipe and having two legs of stainless steel round pipe 6' to 7' long Each of 3'' outer dia circular pipe the board shall be grouted in PCC 1:3:6 type C-1 work of size 350x350x 450mm including taking down of existing complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58504560
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 49 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair To Compound Wall, Fencing And Approach Path, Reinforced Cement Concrete And Wpc Jallies Anuj Nayyar Vihar And Polo Road Messes (Garuda, Asc, Iml, Aad), Sw Comd Hut, S Comd Hut In The Area Of Age B/R-Ii Under Ge (East) Delhi Cantt-10
Basic Detail
Tender No GE/DE-184/2026-27
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 12 Nov 2026
Submission Date 03 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 49 Lakhs
Tender Fee 500
EMD 98000
Exemption Available
Document List
54a32cc5-0ece-480a-a3e6-d5e4abf55216.html
BOQ_895533.xls
Tender184.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
html

54a32cc5-0ece-480a-a3e6-d5e4abf55216.html

xls

BOQ_895533.xls

pdf

Tender184.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender