Tender For Cleaning To Sewage Line, Manhole And Certain Repair/ Maintenance To Drains, Boundary Wall, Grit Plaster, Sewage Line, Manholes, Approach Path, Repair To Roof Treatment, Parapet Plaster, External Plaster, Interlocking Tiles, Chequered Tiles
Tender Overview
Project Description
Tender for Cleaning To Sewage Line, Manhole And Certain Repair/ Maintenance To Drains, Boundary Wall, Grit Plaster, Sewage Line, Manholes, Approach Path, Repair To Roof Treatment, Parapet Plaster, External Plaster, Interlocking Tiles, Chequered Tiles, Plain Cement Concrete Path Plinth Protection, Reinforced Cement Concrete Jalli, Wall Cladding And Other Misc Works At Jco/Or Md Accn And Otm Accn Sanyat Line, Tigris Moude Lines 261 Arty Bde, Hrdc, Library, 261 Bde Sig Coy And 69 Med Regt, 512 Lt Ad Msl Regt And Units In The Area Of Age B/R-I Under Ge (East) Delhi Cantt-10
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for cleaning & clearing manholes by taking off manhole covers and re-fixing the same after cleaning of any description, underground any depth by removing any type of blockage including de-silting and de-chocking and flushing after cleaning, clearing of manholes, complete all as specified and directed. |
| 2 | Cleaning of sewage system including WCs, WHB, bottle traps, nahani and floor traps, soil/waste/rain/drain pipe running on external walls/cancealed type of building including junctions, wihtout distrubing its running/flowing and removing all type of blockages in any situation by mechanical means, complete all as specified and as directed by the Engineer-in-Charge. NOTE: a) The above task shall be caried out by deploying a team, comprising 03 safaiwalas for Md Accn/OTM Accn at Sanyat line, Tigris Moude Line, 261 Arty Bde, 69 Med Regt, 512 LT MSL Regt, HRDC Library, 261 Arty Bde Sig Coy, CG Cell and other units b) Where there is requirement of work involving scaffoldings and jhula, Contractor shall deploy the additional skilled team of workers expert in working on jhullas in high rise bldgs. c) If contractor fails to attend/clean a given complaint (received on any working days till 6 PM) on the same day, is liable to be charged damage @ Rs 500/- per day per complaint. Recovery for same will be deducted from his payment. d) One mechanical pump diesel/petrol for dewatering sludge water, safety belt, ladder, gloves gasmask, bucket to remove sludge, mechnical device required to reach work at difficult locations upto 9 stories shall be made available all time at site. |
| 3 | M&L Removal of blockage in between two manholes of underground sewage line of any type and size upto 300 mm dia by means of rodding with vibrations/drilling concept complete all as specified and directed |
| 4 | Notes for Ser item Nos 1.00 to 3.00:- 1. Rate also includes for necesary tools and plants which is required for execution of item i.e cleaning rod, buckets, bamboos sticks, Kashi etc. 2. Minimum 03 Nos of safaiwala alongwith necessary tools will be required to report to complaint cell (Sanyat Line) to collect the complaint slip from concrened JE on normal working hours from 0900 hrs to 1700 hrs on all working days but on demand for Sundays, Holidays, additional working hours also, contractor shall provide the same to meet the requirements. As per numbers of complaints additional Sweeper/Helper shall also be provided by the contractor but no claim on this account shall be admissible as the payment is to be made per complaint. |
| 5 | Cleaning of septic tanks/soakage wells/sewage lines using Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. (NOTE : In case contractor fails to deploy the machine as per scheduled programme a damage of Rs 1000/- per day shall be deducted from his payment.) |
| 6 | Demolition of reinforced cement concrete as in RCC slabs, beams, etc drains or manhole covers of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 7 | S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with MES engraved in it and with specified thickness complete all as specified and directed . |
| 8 | M&L for RCC work (Nominal Mix) (1:1½:3) type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls, manhole cover, drain covers, Shelves etc and like complete all as specified and as directed. |
| 9 | M&L for TMT bars of 8 mm dia and over, cut to lenghth bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 10 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface flat for rough finished surface of concrete complete all as specified. |
| 11 | S&F Factory made precast perforated heavy duty drain/ manhole covers including MS frame plate and including reinforcement as per IS 12592 : 2002 with size 1.00mtr x 0.50mtr x 75mm thickness complete all as specified and directed by Engineer-in-Charge. |
| 12 | Demolition of brick work or stone/ boulder masonary built in cement mortar including all quoins arches, pillers etc but excluding ashler facings dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 13 | M&L for brick work straight or curved on plan exc 6m mean radius in cement mortar (1:4) with Sub class ‘B’ brick including manhole raising, drains, septic tanks footpath, boundary wall etc complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Taking down cement plaster/grit plaster any description on brick/concrete surfaces etc including raking out joints hacking for key, scrubing down with water etc complete all as specified and as directed. |
| 15 | M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, complete all as specified and as directed. |
| 16 | M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of acrylic emulsion exterior quality over and including a coat of water based primer tint and pattern as approved by GE complete all as specified. |
| 17 | Providing and fixing in replacement at site Factory Made 24 mm thick 100% Solid WPC (Wood polymer Composite) Plain Jali cut on CNC machine of approved design & Colour, measured size comprising of virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with density not less than 650 kg/cbm manufactured by an ISO 9001- 2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof, Fire Retardant and fixing with MS Hollow pipes frame & MS Square bar incl stainless Steel Screws / Fastners or required length all as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. Make : Rajshri / Fenesta / Ecocell |
| 18 | S&F PVC (SWR) bends any radius 110 mmmm dia including taking down complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and as directed. |
| 20 | S&F DWCPE (SN8) nominal size 200 mm (internal dia) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, including takingout old unserviceable pipes complete all as specified and as directed. |
| 21 | S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints aid in trenches/fixed to wall including clamps as required, fixed as in repair complete all as specified. |
| 22 | S&F 75mm dia PVC (SWR) bends with rubber ring joints fixed as required complete all as specified. |
| 23 | Excavation as in trenches in any type of soil not exceeding 1.5 metres wide and not exceeding 1.5 metres deep lines and getting out complete all as specified and directed by Engineer-in-Charge. |
| 24 | M&L Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed. |
| 25 | Removing excavated material/Malba to a distance exceeding 1.5 KM and not exceeding 5 KM depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed. |
| 26 | Dismantling of 150 to 300mm bore SGSW or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches complete all as specified and directed. |
| 27 | Supply and laying 150mm dia Salt glazed stoneware drain pipes laid in trenches and jointed with cement mortar 1:1, testing and spun yarn soaked in neat cement slurry complete all as specified and directed. |
| 28 | M&L for PVC (SWR) 150mm dia pipes single socketed in any length with rubber ring joints, testing laid in trenches or in floors including demolition and breaking up existing unserviceable PVC pipe and removal of debris complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 150 mm internal dia, complete all as specified and directed by Engineer-in-Charge. |
| 30 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregates) as in bed to drain/ sewage pipe including packing under and haunching against the sides of pipes of 200 mm internal dia, complete all as specified and directed by Engineer-in-Charge. |
| 31 | Cleaning of open drains or covered of any section manually including desilting soild/ semi solid materials of any type vegetation growth and removal of sludge upto a distance exc 5.00 KM from the edges of drains etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching for manholes and haunching around manholes frame for setting, coping, holdfast fixing etc including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 33 | M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in surface channels and drains finished even and smooth including use of necessary form work and finishing exposed surfaces even and smooth using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Demolition of plain cement concrete in ground floor and paving not exc. 15 cm thick below or above ground level complete all as specified & directed. |
| 35 | M&L 75mm thick cement concrete type D-2,1:4:8 (using 40mm graded stone aggt) as in sub floors, filling and mass concrete etc complete all as specified. |
| 36 | M & L for machine made Rubber moulded prepolished colored precast concrete interlocking paver block (two colour pattern of red and yellow) of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness M-35 Grade, over and including 40mm average thickness sand cushioning and taking out old unserviceable interlocking paver block complete all as specified and directed. |
| 37 | M & L for machine made Rubber moulded prepolished colored precast concrete interlocking paver block (two colour pattern of red and yellow) of any shape and size with grey cement and pigment conforming to IS 15658-2006 of 80 mm thickness M-40 Grade, over and including 40mm average thickness sand cushioning and taking out old unserviceable interlocking paver block complete all as specified and directed. |
| 38 | Supply and fixing factory made prepolished chequred cement concrete coloured tiles 300mm x 300mm and 25mm thick, set jointed and pointed in neat cement slurry with grey cement mixed with pigment to match the colour of tiles, laid over and incl 20mm thick screed bed in CM 1:6, complete all as specified & directed. |
| 39 | M & L machine cut Kota Stone slab as in flooring / landing of stairs, 20-25mm thick laid over and including 15mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab and including rubbing and polishing and taking down old unserviceable slabcomplete all as specified |
| 40 | M&L machine cut Green Marble slab slab 16 to 18 mm thick fixed as in repairs for dado, wall cladding, garden walls, staircase, steps, pillars, skirting/dado, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white/coloured cement to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified and as directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular.and taking out old unserviceable slab (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish all as spfd. |
| 41 | M & L for OUT DOOR coloured ceramic heavy duty tiles 10 to 15 mm thick (square/ rectangular) area of each tiles not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 including taking down old unserviceable outdoor tilescomplete tiles all as specified. |
| 42 | Dismantling AC sheet/CGI sheet/PGI Sheet/tensile fabric sheet (corrugated, semi corrugated, etc) in roof covering complete all as specified and directed. |
| 43 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by Engr-in-Charge |
| 44 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm complete all as specified & directed by Engr-in-Charge |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for work including doors, gates, angle post etc, complete all as specified and directed by Engr-in-Charge |
| 46 | S & F Mild Steel Framed work as in Mild Steel Gate of angle or other section with gusset plate, rails, braces, stair case, barreled iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks, cover grills, tubular trusse and similar work etc Fe.290.Gde-E-165 complete drilled for fixing of steel sheeting or other covering including welding work, (PCC 1:1.5:3) etc to be prepared for hanging or sliding with and including either hooks, hinges, necessary holdfasts or steel hanging door fittings, locking arrangement, gate closer, stopper etc and hanging also fastening and fixing in building upto 8 mtr height complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F mild steel work as in joist channels, angle or tee section, fixed independently w/o connecting plate conforming to Fe.290.Gde-E-165, incl cutting tops to shape as directed, drilling holes,notching for wire, welding work etc. flat iron fillets incl all necessary drilling, bolting or riveting, etc., drilled and countersunk for balusters running bars, nosing to steps incl embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work including necessary cutting, drilling, welding etc. complete all as specified and directed by Engr-in-Charge |
| 48 | M&L for preparation of newly steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge. |
| 49 | M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamal paint of tint as approved complete all as specified and directed. |
| 50 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels made by wooden beads with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including using white cement in place of grey cement for grit wash complete all as directed. Note:- This item includes use of necessary scafffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate |
| 51 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of Engineer-in-charge. Note:- This item includes use of necessary scaffolding and safety net up to G+5 storey building and no extra payment shall be paid for that. Contractor should keep this aspect in mind while quoting the rate |
| 52 | Disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading and disposal at an approved Municipal dumping ground outside Defence land (MoD land), for all leads and all lifts, complete all as specified and as directed by the Engineer-in-Charge.Notes:1. Photographic Evidence: The contractor shall submit clear photographic evidence in support of disposal of building rubbish/malba, similar unserviceable, dismantled or waste materials, indicating the condition of the site before loading, during transportation and after unloading at the approved Municipal dumping ground. The photographs shall preferably be geo-tagged and date-stamped and shall form part of the record for verification and payment purposes. 2. Certification by Engineer-in-Charge: Completion of whole work in this BOQ shall be deemed to have been achieved only after certification by the Engineer-in-Charge that no building rubbish/malba, similar unserviceable, dismantled or waste materials have been left at the site and that the site has been thoroughly cleared and cleaned to his satisfaction. 3. Each load shall comprise a minimum carrying capacity of 5.00 cubic metres (Cum). Payment under this item shall be made on a per-load basis for loads conforming to the above minimum capacity and duly verified by the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender