Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58504546

Tender For Provn For Connecting Septic Tanks And Provn Of Parking Shed With Flooring And Path Ge (North) Bathinda At Bathinda Mil Stn

Issued by Statutory Bodies & Commissions/Committees · Bathinda, Punjab
Tender Value
36.24 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
72480
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provn For Connecting Septic Tanks And Provn Of Parking Shed With Flooring And Path Ge (North) Bathinda At Bathinda Mil Stn

BOQ

Name of Work:- PROVN FOR CONNECTING SEPTIC TANKS AND PROVN OF PARKING SHED WITH FLOORING AND PATH GE (NORTH) BATHINDA AT BATHINDA MIL STN
Sl. No. Item Description
1Material and labour for surface excavation in soft/loose soil, not exceeding 30 cm in depth and averaging 15 cm deep, including loosening, excavation, getting out and depositing the excavated earth at the site within the specified limits, trimming and levelling the bottom and sides of excavation to the required lines, levels and profiles, complete in all respects, all as specified and directed by the Engineer-in-Charge.
2Material and labour for excavation of post holes or similar isolated holes, each not exceeding 0.50 cum in volume, in all types of ordinary soil, including getting out the excavated earth, returning and filling in the excavated material or broken rubble mixed with earth around the posts/structures, in layers not exceeding 25 cm thick, including watering, well ramming and compacting each layer, removing and disposing of surplus excavated earth to a distance not exceeding 50 metres, and making good the disturbed ground surface to the original condition, complete in all respects, all as specified and directed by the Engineer-in-Charge.
3Material and labour for providing and laying plain cement concrete (PCC) Type C-2, in the nominal mix proportion of 1:3:6, using 40 mm graded crushed stone aggregate, in foundations, foundation beds, filling, mass concrete and similar works, including preparation of the base, mixing of cement, coarse sand and graded stone aggregate in the specified proportion, machine mixing, transportation, placing, spreading, compacting, levelling and finishing to the required lines, levels and profiles, including necessary watering and curing for the specified period, complete in all respects, all as specified and directed by the Engineer-in-Charge.
4Material and labour for providing and constructing brickwork using old-size conventional burnt clay bricks, laid in cement mortar (1:6), in straight or curved alignment on plan with a mean radius exceeding 6 metres, including soaking of bricks, preparation of cement mortar, laying bricks in proper bond, maintaining uniform joints, raking out joints where required, plumbing, levelling, forming necessary quoins, junctions, angles and curved surfaces, jointing and finishing, curing and all necessary incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
5Material and labour for rendering 10 mm thick cement plaster in cement mortar (1:6) on fair faces of brickwork and concrete surfaces, including preparation of the background by cleaning, raking out joints of brickwork, hacking concrete surfaces wherever necessary, wetting the surface, applying and laying cement mortar to the required thickness, finishing the surface even, smooth and true to line, level and plumb, without using extra cement for finishing, including curing for the specified period, complete in all respects, all as specified and directed by the Engineer-in-Charge.
6Material and labour for providing and laying hard core consisting of broken stone or boulders of gauge not exceeding 63 mm, including depositing, spreading and levelling uniformly in layers not exceeding 15 cm thick, watering and thoroughly ramming/compacting each layer to obtain a firm, dense and stable surface, true to the required lines, levels, gradients and profile, including filling voids with smaller stone pieces wherever necessary and all incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
7Material and labour for providing and laying 100 mm thick plain cement concrete (PCC) Type B-2, in nominal mix proportion of 1:2:4, using 40 mm graded crushed stone aggregate, as in flooring for heavy vehicle parking areas, hard standings and similar surfaces, including preparation and compaction of the sub-base, laying concrete in suitable panels as directed, providing necessary formwork to panel edges, mixing, transporting, spreading, compacting by mechanical vibration, finishing the surface to the required line, level and gradient, including broom/rough finish wherever required to provide a non-skid surface, curing for the specified period and all necessary incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
8Material and labour for providing and laying 60 mm thick, coloured, machine-pressed, precast cement concrete interlocking paver blocks of approved size, shape, pattern, colour and glossy finish, manufactured using grey cement with suitable approved colouring pigments, of minimum M-40 grade, conforming to IS 15658:2006, laid over a properly prepared and levelled sand bedding layer, including arranging paver blocks in the approved pattern, cutting and fitting at edges, curves and junctions, maintaining uniform joints, filling joints with fine sand, compacting the laid blocks using a suitable plate vibrator with protective rubber pad, levelling and finishing the surface to the required line, level, slope and gradient, complete in all respects, all as specified and directed by the Engineer-in-Charge.
9Material and labour for providing and laying clean, coarse sand filling as bedding layer under interlocking concrete paver blocks, including spreading uniformly to the required thickness, levelling and dressing to the required lines, levels, slopes and gradients, watering and properly consolidating/compacting to obtain a firm, even and stable bedding surface suitable for laying interlocking paver blocks, including all necessary labour, tools, tackles and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
10Supply and fixing of structural mild steel plates, plain or chequered, including channels and similar steel sections, of Fe-410-W grade (E250, Quality B), cut to required sizes and shapes, square cut or notched, including forming ordinary or countersunk holes wherever required, drilling, punching, straightening, edge preparation and fitting in position, without any additional attachments, and securing firmly by riveting, welding or fixing with suitable nuts and bolts, including the cost of all nuts, bolts, washers, rivets, welding electrodes and other necessary fixing accessories, complete in all respects, all as specified and directed by the Engineer-in-Charge.
11Supply, fabrication and fixing of structural steel work in tubular sections, including posts, trusses, purlins and similar structural members, using Electric Resistance Welded (ERW) or induction butt-welded steel tubes conforming to IS 1161, Grade YSt 240, including cutting, straightening, shaping, bending, drilling, welding, forming joints and connections, providing necessary gusset plates, cleats, brackets, base plates, stiffeners, special-shaped washers, bolts, nuts and other required fastening accessories, assembling and erecting in position, including hoisting, alignment, levelling, plumbing and securing firmly to the supporting structure, complete in all respects, all as specified and directed by the Engineer-in-Charge.
12Supply and fixing of mild steel bolts, exceeding 12 mm but not exceeding 20 mm in diameter and exceeding 30 cm in length, purpose-made with hexagonal or square head at one end and threaded at the other end, or threaded at both ends, as required, including providing and fixing suitable mild steel washers and one hexagonal or square nut to each threaded end, complete with cutting, drilling, fitting, tightening and securing in position, including all necessary tools, tackles, labour and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
13Material and labour for preparing steel/iron surfaces of any description, exceeding 10 cm in width or girth, including removal of rust, loose mill scale, old flaking paint, dust, grease and other foreign matter by wire brushing, scraping and sandpapering, making the surface clean, dry and suitable for painting, applying one coat of approved quality red oxide primer uniformly over the prepared surface, followed by two coats of approved make synthetic enamel paint of approved colour and shade, ensuring proper coverage, uniform finish and adequate drying time between successive coats, including all necessary materials, labour, tools, scaffolding and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
14Material and labour for preparing newly plastered surfaces and applying two coats of approved quality cement-based paint of approved make, colour and shade, including thoroughly cleaning the surface, removing dust, dirt, loose particles and other foreign matter, rubbing down minor surface irregularities and ensuring that the plaster is sufficiently dry and properly cured before painting, mixing the paint with water in accordance with the manufacturer's instructions, applying two uniform coats by brush or roller to achieve an even, smooth and consistent finish, allowing adequate drying time between successive coats, including all necessary materials, labour, tools, tackles and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
15Supply and fixing of 0.50 mm thick pre-painted Galvalume corrugated steel sheets, manufactured from aluminium-zinc alloy coated steel base metal having minimum tensile strength of 550 MPa and metallic coating mass of AZ150, of approved colour, profile and finish, suitable for roof covering and wall cladding, including cutting, shaping, laying, aligning, providing necessary side and end overlaps and fixing securely in position with approved corrosion-resistant self-tapping screws complete with EPDM/neoprene sealing washers, ensuring proper alignment, adequate fastening and weather-tight joints, including all necessary accessories, labour, tools, tackles and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
16Supply and fixing of mild steel (MS) structural steel work in the form of wind ties for roof structures, including fabrication, cutting, drilling, shaping, bending, welding and assembling to the required sizes and profiles, providing and fixing necessary MS flats, rods, angles, cleats, gusset plates, brackets and other connecting components as required, including supplying and fixing all necessary bolts, nuts, washers and other fastening accessories, securely connecting the wind ties to the existing/new roof trusses and supporting structural members, including applying one coat of approved red oxide primer to all exposed surfaces after fabrication, complete in all respects, all as specified and directed by the Engineer-in-Charge.
17Material and labour for preparing steel/iron surfaces of any description, not exceeding 10 cm in width or girth, when unconnected with other painted surfaces or when required to be painted in a different tint/shade, including removal of rust, loose mill scale, old flaking paint, dust, grease and other foreign matter by wire brushing, scraping and sandpapering, making the surface clean and suitable for painting, applying one coat of approved quality red oxide primer, followed by two coats of approved make synthetic enamel paint of approved colour and shade, ensuring uniform coverage and smooth finish, including necessary materials, labour, tools, tackles and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
18Material and labour for providing PCC bedding and haunching in cement concrete 1:3:6, Type C-2, using 40 mm graded stone aggregates, for 200 mm internal diameter drain pipes, including preparation and levelling of the trench bottom, laying and compacting concrete bed to the required line, level and gradient, carefully packing concrete underneath the pipe and providing haunching against both sides of the pipe after laying and testing, ensuring proper support, uniform bearing and stability without disturbing the alignment or damaging the pipe, including finishing, curing and all necessary incidental works, complete in all respects, all as specified and directed by the Engineer-in-Charge.
19Material and labour for providing PCC bedding and haunching in cement concrete 1:3:6, Type C-2, using 40 mm graded stone aggregates, for 300 mm internal diameter drain pipes, including preparation and levelling of the trench bottom, laying and compacting concrete bed to the required line, level and gradient, carefully packing concrete underneath the pipe and providing haunching against both sides of the pipe after laying and testing, ensuring proper support, uniform bearing and stability without disturbing the alignment or damaging the pipe, including finishing, curing and all necessary incidental works, complete in all respects, all as specified and directed by the Engineer-in-Charge.
20Supply and fixing, including providing, lowering and laying of 200 mm internal diameter (ID) HDPE double-wall corrugated (DWC) pipe, SN-8 stiffness class, conforming to IS 16098 (Part 2):2013, suitable for underground drainage/sewerage applications, including transportation, handling, lowering into trenches, laying to the required line, level and gradient, jointing with suitable couplers and elastomeric sealing O-rings, ensuring proper seating and watertight joints strictly in accordance with the manufacturer's recommendations, including cutting, alignment, testing of joints, all necessary jointing materials, labour, tools, tackles and incidental works, complete in all respects, all as specified and directed by the Engineer-in-Charge.
21Supply and fixing, including providing, lowering and laying of 300 mm internal diameter (ID) HDPE double-wall corrugated (DWC) pipe, SN-8 stiffness class, conforming to IS 16098 (Part 2):2013, suitable for underground drainage/sewerage applications, including transportation, handling, lowering into trenches, laying to the required line, level and gradient, jointing with suitable couplers and elastomeric sealing O-rings, ensuring proper seating and watertight joints strictly in accordance with the manufacturer's recommendations, including cutting, alignment, testing of joints, all necessary jointing materials, labour, tools, tackles and incidental works, complete in all respects, all as specified and directed by the Engineer-in-Charge.
22Material and labour for providing and constructing brickwork using old-size conventional burnt clay bricks, laid in cement mortar (1:4), in straight or curved alignment on plan with a mean radius exceeding 6 metres, including soaking of bricks, preparation of cement mortar, laying bricks in proper bond, maintaining uniform joints, raking out joints where required, plumbing, levelling, forming necessary quoins, junctions, angles and curved surfaces, jointing and finishing, curing and all necessary incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
23Excavation in trenches not exceeding 1.50 m in width and not exceeding 1.50 m in depth, for foundations, shafts, walls, cesspits, manholes, pier holes and similar works, in soft/loose soil, including setting out, excavation, getting out the excavated earth, trimming and dressing the sides and bottom, levelling and stacking/disposal of excavated material as directed, complete all as specified and directed by the Engineer-in-Charge.
24Excavation in trenches not exceeding 1.50 m in width and exceeding 1.50 m but not exceeding 3.00 m in depth, for foundations, shafts, walls, cesspits, manholes, pier holes and similar works, in soft/loose soil, including setting out, excavation, getting out the excavated earth, trimming and dressing the sides and bottom, levelling and stacking/disposal of excavated material as directed, complete all as specified and directed by the Engineer-in-Charge.
25Excavation over areas not exceeding 1.50 m in depth, in soft/loose soil, including setting out, excavation, getting out the excavated earth, dressing and levelling the bottom and sides, and stacking the excavated material as directed, complete all as specified and directed by the Engineer-in-Charge.
26Excavation over areas exceeding 1.50 m but not exceeding 3.00 m in depth, in soft/loose soil, including setting out, excavation, getting out the excavated earth, dressing and levelling the bottom and sides, and stacking the excavated material as directed, complete all as specified and directed by the Engineer-in-Charge.
27Excavation over areas exceeding 3.00 m but not exceeding 4.00 m in depth, in soft/loose soil, including setting out, excavation, getting out the excavated earth, dressing and levelling the bottom and sides, and stacking the excavated material as directed, complete all as specified and directed by the Engineer-in-Charge.
28Material and labour for providing and laying cement concrete (CC) 1:2:4, Type B-1, using 20 mm graded crushed stone aggregate, for manhole benching, coping and similar works, including preparation of the base, mixing of materials in the specified proportion, laying, compacting, ramming, shaping to the required profile, finishing to the required line, level and slope, and curing complete, all as specified and as directed by the Engineer-in-Charge.
29Material and labour pre-cast RCC 1:24 type B-1 using 20mm garded crushed stone aggreagte as in pre-cast manhole cover slabs of any thickness, size or shape including all necessary form work, finishing concrete surface fair & even and set in CM 1:4 all as specified and directed by Engineer-in-Change.
30Material and labour for providing and fixing high-yield strength deformed (HYSD) TMT steel reinforcement bars of grade Fe 500/Fe 550D, 6 mm to 8 mm diameter, cut to required lengths, bent and shaped as per bar bending schedule and structural drawings, including straightening, cutting, bending, cranking, forming spirals/helical reinforcement for column ties/hoops, providing hooks and bends at ends, placing and securing in position, including binding with and providing mild steel annealed binding wire of minimum 0.9 mm diameter or suitable approved clips, including all necessary laps, bends, hooks, wastage, handling, tools and tackles, complete in all respects, all as specified and directed by the Engineer-in-Charge.
31Material and labour for providing and applying 15 mm thick cement plaster in cement mortar 1:4 on fair or unfair faces of brickwork or concrete surfaces, including preparation of the background by cleaning, wetting and raking out joints wherever required, applying and finishing the plaster to an even, smooth and uniform surface without using extra cement, including mixing and incorporating liquid waterproofing compound (WPC) at the rate of 200 ml per 50 kg bag of cement, as per the manufacturer's instructions, proper curing and all necessary materials, labour, tools, tackles and incidental works, complete in all respects, all as specified and directed by the Engineer-in-Charge.Notes:(i) Liquid waterproofing compound (WPC) shall be measured and paid for separately under the appropriate supply-only item of Schedule 'A' of the BOQ.(ii) Labour for mixing and incorporating the separately supplied WPC in the mortar shall be deemed included in this item.
32Material and labour for returning and filling excavated earth in trenches, foundations, plinths and other required locations, including spreading the earth in layers not exceeding 25 cm thick each, breaking clods, removing unsuitable material, levelling and dressing each layer, watering to optimum moisture content and well ramming/compacting each layer to achieve proper consolidation, including all necessary labour, tools, tackles and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
33Removal and disposal of excavated earth/soil from trenches, foundations and other excavations, including lifting, carrying and depositing the excavated material at a location directed by the Engineer-in-Charge, involving a vertical lift not exceeding 1.5 metres above the starting point, including all necessary labour, handling, tools, tackles and incidental operations, complete in all respects, all as specified and directed by the Engineer-in-Charge.
34Supply only approved make and brand of liquid waterproofing compound, suitable for use in cement concrete and cement mortar, conforming to relevant applicable IS standards and compatible with the cementitious waterproofing system, in original sealed containers, complete with manufacturer's technical data sheet, batch number, manufacturing date, expiry date and recommended dosage/application instructions. The material shall be delivered at site, inspected and approved by GE/Engineer-in-Charge and stored in safe custody under lock and key, complete in all respects, all as specified and directed by the Engineer-in-Charge.
35Supply and fixing of mild steel (MS) work in the form of manhole rungs, hooks, handles, holdfasts, and other small MS articles of required sizes and sections, including cutting, bending, shaping, drilling, welding, fabrication, providing necessary holes, bolts, nuts, washers and other fittings, positioning, alignment, fixing and securing in position, applying one coat of red oxide metal primer and making good the adjoining surfaces, wherever required, complete in all respects, all as specified and as directed by the Engineer-in-Charge. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58504546
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 36.24 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provn For Connecting Septic Tanks And Provn Of Parking Shed With Flooring And Path Ge (North) Bathinda At Bathinda Mil Stn
Basic Detail
Tender No 8941/NIT-55/26-27/E8
Bidding Type Tender
Location
City Bathinda
State Punjab
Key Dates
Publish Date 12 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 36.24 Lakhs
Tender Fee 500
EMD 72480
Exemption Available
Document List
0f6f854b-78fc-47a6-ae2e-aced9243374e.html
BOQ_895736.xls
tenderdocuments55.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

0f6f854b-78fc-47a6-ae2e-aced9243374e.html

xls

BOQ_895736.xls

pdf

tenderdocuments55.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender