Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #58504516

Tender For Special Repair To Bldg No P-24 And P-25 (Amn Shed 13X5 Mtr) At Amn Point Algarah Under Ge 867 Ews.

Issued by Statutory Bodies & Commissions/Committees · South District, Sikkim
Tender Value
18.72 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
37440
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
South District → Sikkim
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Bldg No P-24 And P-25 (Amn Shed 13X5 Mtr) At Amn Point Algarah Under Ge 867 Ews.

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO P-24 AND P-25 (AMN SHED 13X5 MTR) AT AMN POINT ALGARAH UNDER GE 867 EWS.
Sl. No. Item Description
1Dismantling of structural steel work including doors, gates but excluding framed truss, etc. complete all as specified and as directed.
2Fixing only of structural Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framingetc (beam, tee, angle, channel or flat section), etc. complete all as specified and as directed.
3S&F Mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe 410-W (Gde 250 quality A), etc. complete all as specified and as directed.
4Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings, etc. complete all as specified and as directed.
5S&F Pre-painted galvalume aluminum zinc coating GI based corrugated/Semi-corrugated steel sheet with approved profile and 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed.Make : TATA Bluescope, Durakolor, CRIL
6S&F Pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, etc. complete all as specified and as directed.Make : TATA Bluescope, Durakolor, CRIL
7Demolition of precast concrete block walling and precast concrete articles etc, built in cement mortar, etc. complete all as specified and as directed.
8M&L for Pre-cast cement concrete block masonry with machine pressed solid blocks of type C-1 (1:3:6) (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in CM 1:6, etc. complete all as specified and as directed.
9M&L for 10mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surfaces of internal walls finished even and smooth without using extra cement, etc. complete all as specified and as directed.
10M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface on external wall surfaces finished even and fair with WPC without using extra cement, etc. complete all as specified and as directed.Note : WPC will measured and and paid separately.
11Supply integral Water Proofing Compound, etc. complete all as specified and as directed.
12M&L for Preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitining primer over 3mm thick layer of putty, etc. complete all as specified and as directed.
13M&L for preparation of new plaster surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, etc. complete all as specified and as directed.
14Demolition of cement concrete (un reinforced) in ground floor & paving not exceeding 15 cm thick below or above ground level, etc. complete all as specified and as directed.
15M&L for 75 mm thick PCC type C-2 (1:3:6) (using 40mm graded stone aggregate) as in sub base, path, plinth protection, etc. complete all as specified and as directed.
16M&L for 20-25mm thick Machine cut kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in CM 1:6, etc. complete all as specified and as directed.
17M&L for 20-25mm thick Kota stone slab as in riser of steps, skirting, dado and pillar and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10 mm thick rendering/back coat in CM 1:4, etc. complete all as specified and as directed.
18M&L for 20cm x 20cm x25 mm thick Pre-polished Chequered cement concrete tiles set jointed with grey pigment cement and pigments in neat cement slurry including 15 mm thick screed bed in CM 1:6, etc. complete all as specified and as directed.
19M&L for PCC type C-1 (1:3:6) (using 20 mm graded stone aggregate) as in surface channels, drains including all necessary form work, etc. complete all as specified and as directed.
20M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitred/ stopped ends, etc. complete all as specified and as directed.
21Taking down chowkhats or frame exc 1.50 and n.exc 4.00 sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed.
22Taking down chowkhats or frame n.exc 1.50 sqm each with shutter without taking off shutters from the frame, etc. complete all as specified and as directed.
23M&L for 1.6mm thick MS Plates of plain or chequered, channels, in hearths, covering to door shutters, covering to door chowkats (frames), chullah hoods; water tanks; water troughs; ducts;square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A, etc. complete all as specified and as directed.
24Supply only 125 mm size butt hinges of medium weight cold rolled mild steel and fixed, etc. complete all as specified and as directed.
25Supply only 300mm long MS sliding door bolts of bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, etc. complete all as specified and as directed.
26Supply only 150 mm size MS Pressed handle of oval type, stove enamelled black and fixed, etc. complete all as specified and as directed.
27S&F Steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, etc. complete all as specified and as directed.
28S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc. complete all as specified and as directed.
29S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0, etc. complete all as specified and as directed.
30S&F 3.00 mm thick sheet glass of ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane, etc. complete all as specified and as directed.
31M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, etc. complete all as specified and as directed.
32Dismantling and taking down Aluminium strip fixed on roof, floor wall and taking out old saddles and refixing aluminium strip on new porcelain saddles and connecting to earthing strip in original state, etc. complete all as specified and as directed.
33S&F in replacement of single pointed Air Termination Copper rod of 12mm dia and 300 mm long including support block and taking down exisiting one, etc. complete all as specified and as directed.
34S&F in replacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawin in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32x6mm GI strip including taking down exisitng strip any type, etc. complete all as specified and as directed.
35S&F in replacement of 25mmx 3mm Aluminium strip as a roof conductor or down conductor complete all with saddles and fixing screws for fitting the strip, etc. complete all as specified and as directed.
36S&F in replacement of HDPE/porceiline insulator 15 BMD type-T alongwith wooden gutkha with nut bolts / screws for fixing of copper / aluminium strips / GI strips on walls etc to the wall / floor/pole or any indicated location, etc. complete all as specified and as directed.
37S&F in replacement of Test Point of Terminal Block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 Nos 8mm dia 25 mm long hex. head screw, complete with suitable polycaronate box with locking arrangement, etc. complete all as specified and as directed.
38M&L for Earthing complete with galvanized steel earth plate electrodes 600x600x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron wire 4mm dia by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil including pit made of PCC type C-1 (1:3:6) (using 20mm graded stone aggregate) with and including RCC cover, charcoal, salt, funnel, all as directed at site, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information
39M&L for Earthing complete with galvanized steel earth plate electrodes 600x600x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron wire 4mm dia by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil including pit made of PCC type C-1 (1:3:6) (using 20mm graded stone aggregate) with and including RCC cover, charcoal, salt, funnel, all as directed at site, etc. complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58504516
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 18.72 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Bldg No P-24 And P-25 (Amn Shed 13X5 Mtr) At Amn Point Algarah Under Ge 867 Ews.
Basic Detail
Tender No 8621/E8
Bidding Type Tender
Location
City South District
State Sikkim
Key Dates
Publish Date 12 Nov 2026
Submission Date 03 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 18.72 Lakhs
Tender Fee 500
EMD 37440
Exemption Available
Document List
47f15423-32be-45ad-a66b-23633d31b867.html
BOQ_895697.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

47f15423-32be-45ad-a66b-23633d31b867.html

xls

BOQ_895697.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender