Tender For Improvements At Elanthurithi Panchayat Auditorium In Pacode Town Panchayat.
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
01 Dec 2026
14 days left
EMD
9500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanniyakumari → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvements At Elanthurithi Panchayat Auditorium In Pacode Town Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Cement concrete 1:2:4 (one part of cement two part of sand and four part of aggregates) using machine broken granite jelly of 20 mm size for all cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. |
| 2 | Supplying and fixing Solid Blocks of following size conflirming to SS 2145-1965 (including jam blocks closers etc) made in cement concrete 1:3:6 mix in cement mortor 1:5 and partition wall including curing neat finishing etc complete complying with standard specification and as directed by the departmental officers etc (Approved by SE(CW) in Lr.No, 15056/95/DB/S1/Dated 23.08.95) |
| 3 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. |
| 4 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97 |
| 5 | Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30 |
| 6 | Painting two coats with ready mixed plastic emulsion paints of first class quality and of approved colour over old existing coat including through scraping clean removal of dirt etc, complete and including cost of necessary plaster of paris, putty, brushes, wherever required and all labour charges, scaffolding charges etc., complete as per standard specification. |
| 7 | Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (U PVC) sections. The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.1 Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. |
| 8 | Supplying and fixing of steel windows with suitable design including cost of materials, welding and conveyance of all materials to site locking arrangements and painting one coat of primer etc complete as per standard specification including fixing charges etc. complete for the work. |
| 9 | Supply and fixing of 4 Feet LED 18W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 443 |
| 10 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp SD 110 |
| 11 | Supply and fixing of 230mm SL Bracket with fancy glass shade with 7W / 9W LED bulb SD 82 |
| 12 | Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc with two coats of best approved first quality and colour of synthetic enamel paint over the existing old coat in all floors excluding cost of priming coat etc complete complying with standard specification. |
| 13 | Painting the old wood work or plastered surface two coats in all floors with best synthetic enamel paint of approved quality, colour and brand to be approved by departmental officer before use on works including ordinary scrapping, sand papering and preparation of surface including coat of brushes, high scaffolding charges neat finishing complying with standard specification and as directed by the departmental officers. |
| 14 | Supplying and fixing in position of vertical column arrangements with 80 mm Ø size GI pipe and base plate of size 30 x 30 x 10 mm and bed plate of size 30 x 30 x 12 mm and with support of 50 x 50 x 6 mm size angle are provided at base and bed plates to GI pies and drilling holes in the MS angles if necessary to accommodate the bolts, including one coat of red oxide primer etc. complete complying with standard specification and as directed by the departmental officers. |
| 15 | Supplying, fabricating, erecting structural steel trusses work for roofing welded or bolted type using necessary mild steel rectangle and square box sections etc each according to given design conforming to IS specification. It includes cutting, welding, conveyance of all materials to work site, primer coating and enamel painting and approved by the departmental officers etc complete as per standard specification. |
| 16 | Supplying and fixing of roofing with galvaline Sheet 0.47 mm thick of approved quality by drilling hole (and not by punching) with necessary J/U bold and nut of 8 mm Ø of suitable length providing one set of bitumen washer at 25 mm Ø and 1.60 mm thick for each bold and nut including protruding portion of bold and nut shall be covered with bitumen compound etc complete complying with standard specification and as directed by Engineer incharge. TNBP NO.49. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysDec 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender