Drinking Water Supply and Sanitation Local Bodies Closing in 13 days TDR #58503450

Tender For Maintenance And Repair Works To The Icds Centre 6 Nos ( Centre No 312,313,314,320,321,322) At Ganapathy Nanjappa Street In Ward No 46, Central Zone. Roc No. 6032 /2026/Md5

Issued by Local Bodies · Coimbatore, Tamil Nadu
Tender Value
15 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Maintenance And Repair Works To The Icds Centre 6 Nos ( Centre No 312,313,314,320,321,322) At Ganapathy Nanjappa Street In Ward No 46, Central Zone. Roc No. 6032 /2026/Md5

BOQ

Name of Work:- Maintenance and Repair works to the ICDS centre 6 Nos ( centre No 312,313,314,320,321,322) at Ganapathy Nanjappa street in ward no 46, Central Zone. Roc No. 6032 /2026/MD5
Sl. No. Item Description
1Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 c.u.m. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m initial lead and 2m initial lift as per the direction of Engineer-in-charge.
2Cement concrete 1:4:8 (one cement, foursand and eight aggregate) using 40mm hardbroken granite stone jelly for foundationincluding dewatering if found necessary andlaid in layers of not more than 15 cm thickand compacted etc.,complete complying witstandard specification.
3Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm including cost of materials and labour charges etc., as per standard specification
4Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc.
5Supplying and erecting CENTERING for sides and soffits including supports and strutting up to 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS. STAIRCASE WAIST, LANDING SLAB, LANDING BEAM and CANOPY etc., in all floors with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over country wood joists of size 10cm X 6.50cm spaced at about 90cm centre to centre and supported by Casuarinas props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed
6Supplying, fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification
7Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for all RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete.
8Supply and fixing of SFRC cover 600x600mm etc complete
9Roofing with Pre painted Galavalume sheet 0.47mm thick with necessary bolt and nuts andwashers including allmaterials and labour charges etc complete - 10m2
10PLASTERING with cement mortar 1:5(one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.
11Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (MSand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
12Flooring with 20mm thick cement concrete 1:3 mix (no sand to be used) using 3mm to 10mm ISS gauge HBBG chips and the surface rubbed hard and finished smooth with neat cement Ellise pattern surface 1 sort
13Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable PVC rigid Pipe on wall and celling with PVC accessories and with TW Switch box and 5A.F.T. Switch with painting of suitable colour for open PVC light point/Fan point(For Electronic Regulator
14Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable PVC rigid Pipe on wall and celling with PVC accessories, In flush with wall, with 150mmx100mmx113mm TW switch box wall 3mm thick Hylem sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of.14 SWG TC wire and making good of the open PVC plug point
15Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable Pipe on wall and celling with PVC accessories with 150mmx100mmx63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point
16Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\")
17Supply and fixing of 18W LED tube light fitting ISI make
18Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .
19Painting with approved Plastic Emulsion paint approved quality and colour two coats for wall surfaces including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
20Painting with enamel paint two coats over prime coat for iron works using good quality and approved colour etc. completed.
21Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block size 63mm thick in uniform shape of approved make to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling the base, preparation of sub base with sand cushion 100mm thick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification
22Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304LGrade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58503450
AUTHORITY Local Bodies
TENDER VALUE 15 Lakhs
LAST DATE 30-11-2026
Authority
Authority Name Municipal Adminitration And Water Supply Department
Work Description Tender for Maintenance And Repair Works To The Icds Centre 6 Nos ( Centre No 312,313,314,320,321,322) At Ganapathy Nanjappa Street In Ward No 46, Central Zone. Roc No. 6032 /2026/Md5
Basic Detail
Tender No E91/2026 CZ
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 12 Nov 2026
Submission Date 30 Nov 2026
Open Date 01 Dec 2026
Finance
Tender Value 15 Lakhs
Tender Fee Ref. Documents
EMD 15000
Exemption Not Available
Document List
BOQ_870935.xls
c2e1c2be-65ce-4866-bf24-2525e8a7bf22.html
ITB.pdf
Single.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 13 days
Dec 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 14 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_870935.xls

html

c2e1c2be-65ce-4866-bf24-2525e8a7bf22.html

pdf

ITB.pdf

pdf

Single.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender