Tender For Redevelopment Of Janpath Streetscape At Vanibihar (Pocket I To V), Redevelopment Of Idco Tower Frontage & Reconstruction Of Idco Plazza Bbsr For The Year 2026-27.
Tender Value
1.56 Crore
Estimated cost
Bid Submission
25 Nov 2026
2 days left
EMD
1.56 Lakhs
Bank guarantee accepted
Document Fee
11080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Redevelopment Of Janpath Streetscape At Vanibihar (Pocket I To V), Redevelopment Of Idco Tower Frontage & Reconstruction Of Idco Plazza Bbsr For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Dismanteling & removing old tile flooring / paver flooring/ existing footpath including removing the base course and stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Sqm.) (Data for 9.30 Sqm.) |
| 2 | Dismantling brick or stone masonry in lime or cement mortar under 3. m height including stacking the useful materials for reuse and removing the debris with in 50. m Lead. (per 1 Cum.) (Data for 2.83 cum.) including all cost of labour T&P etc, complete. |
| 3 | Earth work in all kind of soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge (per 100 Cum.) |
| 4 | Filling foundation & plinth with sand or excavated earth of approved quality including leveling and dressing the site in proper position with finished work with cost, conveyances, taxes, of all materials & labour with T&P required for the work. |
| 5 | Removing and refixing of Paver block cement concrete interlocking paver block of M-40 grade and approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 6 | Cement concrete of prop (1:3:6) in foundation and floors using 4cm. size black hard (crusher broken) granite metal of approved quality from approved quarry including cost, conveyance, royalties and taxes of all materials and cost of all labour, watering and curing, sundries and T&P required for the work complete as directed by the Engineer in charge. |
| 7 | Supplying, fitting & fixing of 100 x 100mm MS square pipe for Rafter Purlin and post including cost, conveyance, royalties and taxes of all materials and cost of all labour and T&P required for the work complete as directed by the Engineer in charge. |
| 8 | Supplying fitting & fixing of 6mm thick polly carbonate sheet in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. complete including cost of sheet & all fitting (per 1 Sq. Mtr.) (Data for 9.3 sqm.) AR-page125/32 |
| 9 | Fly ash Brick massonary work in C.M. (1:6) in foundation and plinth using fly ash Brick having crushing strength not less than 125Kg./Cm2 including splays cutting circular,moulding watering curing for finished work including cost, conveyances, taxes, royality of all materials and labour with T&P required for the work as per the direction of the Engineer-in-charge. |
| 10 | Providing 16mm thick cement plaster (1:6) to inside rough surface after racking out joints including watering, curing, cost, conveyances, royalties & taxes of all materials, labour, T&P required for the work etc. complete as per direction of the E.I.C. |
| 11 | Providing R.C.C. work in M-20 grade using 20mm size crusher broken granite stone chips & down graded including centering, shuttering, and fan hook etc required for the work with watering, curing etc. with cost, conveyance, taxes of all materials and cost of all labour with T&P required for the work but excluding cost of M.S.Rod, binding wires, labour for cutting, bending, binding and tying the grills etc.complete in all respect as per direction of Engineer-in-charge. |
| 12 | Staircase |
| 13 | For footing & Pedestal (trellis+gazeebo) |
| 14 | Cutting, straightening coiled or bent-up M.S.Rod/Tor steel, bending, binding, and tying the grills and placing in position as required for R.C.C. work hoisting, lowering and laying including cost, conveyances, taxes of M.S.Rods/Tor steel and binding wires of 18 to 20 gauge and labour required for bending, binding and tying the grills.(Payment will be made on weight of M.S.Rods and tor steel only and no separate payment will be made towards binding wires) |
| 15 | Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408. |
| 16 | Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape, including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450 mm long with 150x150x6 mm M.S. plate welded at bottom and embedded 150 mm in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450 mm deep for the same in bitumen/concrete pavement at specifiedspacing. |
| 17 | Supplying, fitting & fixing of Sitting Chair RCC type with Painting works etc including cost of all materials, labours and T&P etc complete. |
| 18 | Supplying and stacking of good earth at site including royalty and carriage(earth measured in stacks will be reduced by 20% for payment) |
| 19 | Providing and fixing of Neelgiri/mexican grass/broadleaf at the site with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required toolswooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler and maintanance for 30 days or more till the grass established properly as per direction of H.O. Incharge |
| 20 | Supplying, fitting & fixing of Granite flooring of size 0.40 to 1.00 sqm on 20mm thick cement plaster (1:4) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete . |
| 21 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the 1061 SUB HEAD : 16- ROAD WORK joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge |
| 22 | supplying, fitting and fixing Ceramic wall Tile Spaniso (Egypto) 450x150mm /450 x 300mm Coloured / Printed series in wall with on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost of all materials, labour T&P etc required for the work. including cost conveyance, taxes etc. complete |
| 23 | Providing and laying of 60mm thick factory made cement concrete interlocking paver block of M35 grade of approved make design colour and size made by Block making machine with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete including cost, conveyance, royality, taxes of all materials, labour, T&P etc. complete as per direction of EIC.confirming to IRC-SP 63:2018 |
| 24 | Supplying, fitting & fixing of MS main gate made out of MS flat, angle etc with cost, conveyances, royalties & taxes of all materials, labour, T&P required for the work etc. complete as per direction of the E.I.C. |
| 25 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materilas, labour, T&P etc. required for the complete in all respect. |
| 26 | Providing 6mm thick cement plaster (1:4) to RCC smooth surface after racking out joints including watering, curing, cost, conveyances, royalties & taxes of all materials, labour, T&P required for the work etc. complete as per direction of the E.I.C. |
| 27 | Cutting, bending, binding, welding of GI Pipe (Medium) of 150mm dia used for Fire Fighter including cost of all materials, labours and T&P etc complete. |
| 28 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 29 | Wall painting Two coats with weather paint of approved shade on wall surface with a coat of primer to give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding etc. (per one Sq. Mtr.) (Data per 10 Sqm.) INCLUDING COST OF MATERIL &Labour |
| 30 | Cement concrete (1:2:4) using 12mm to 20mm size hard crusher broken granite stone chips of approved quality and from approved quarry including lowering, laying, compacting concrete with watering, curing including cost, conveyances, royalties & taxes of all materials with cost of all labour, T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge. |
| 31 | Terminalia mentaly of HT 180-210cm healthy well developed in big poly / Gunney Bag |
| 32 | Plumeria alba height 165-180cm with 3-4 branch and thick stem in big size HDPE bag |
| 33 | Clerodendrum thomposonae of height 30 to 45cm in 20cm size of pollybag |
| 34 | Spathiphylium (peace lilly) having height 25cm & above bloming stage with fresh & healthy foliage well developed in 16 to 20cm ceramic pot |
| 35 | Providing and stracking of ficus religiosa (Peepal) of height 150-165cm in Poly bag of size 30cm as per direction of the Office-in-charge. |
| 36 | Providing and stracking of Butea frondosa (flame of forest) of height 60-75cm in Poly bag of size 25cm as per direction of the Office-in-charge. |
| 37 | Providing and stracking of Bombaxceiba of height 150-165cm in Poly bag of size 25cm as per direction of the Office-in-charge. |
| 38 | Providing and stracking of Eugenia jambolana (Jamun) of height 150-165cm in Poly bag of size 25cm as per direction of the Office-in-charge. |
| 39 | Painting Two coat with approved Synthetic Enamel paints with a coat of Red oxide primer of approved colour, shade to old wood & Iron work including sand papering, polishing the surface, cost, conveyances, of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. |
| 40 | Disposal of surplush debris away from worksite by mechanical means including loading and unloading with cost of all labours and T&P etc complete. |
| 41 | Type L1 - Supply & fixing of 10 W LED Bollard light IP66 and IK08 protected outdoor architectural luminaire in a contemporary design injection moulded PC diffuser for higher light efficiency and a larger illuminance range. LED luminaire of PDC aluminium housing with Corrosion resistance Powder coated finish using Nano Technology. All drivers should be isolated constant current type and have adddition protections like Reverse polarity, Mis wiring, Over voltage protection upto 320V, under voltage protection <80V cut off and recover at normal 100V Over temperature protection upto 120-150deg C off mode. Any short circuit the system should itself recover without any manual interuption. Operating voltage AC 140–275 Volt, frequency 50/60 hz, driver efficiency >85%, internal surge protection of 6 KV and additional 20KV SPD inside the fitting, THD <10%, P.F. ≥0.95, CRI ≥80, operating temperature of 0 to 50 Deg C. Life expectancy of LED with minimum 50000 Burning Hours at L70 as per LM80 extrapolation along with IES TM-21-11, CCT 3000 K (As per ANSI Bin) with MacAdam value of SDCM<5. Maximum power consumption should not be more than the specified wattage rating and Fixture shall be of relevant BIS standard and CE, RoHS certified. Manufacturer's Name Engraved/Embosing on housing, complete in all respect including external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable with all neccessary safety as required with Minimum 5 year OEM warranty. System lumen efficacy ≥65 lm/Watt. LM79 & LM80 test report, BIS certificate of driver and luminaire and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. Thermal management of aluminium housing should be such that LED junction temperature shall not rise above 80°C. height ~ 900mm to 1000mm, with anchor bolts and integral driver - complete. (Approved Make: Havells/Crompton/Wipro/Lighting Technologies/Panasonic/Philips). |
| 42 | Type L2 - Supply & fixing of 25 W LED Post Top light, IP66 and IK08 protected outdoor architectural luminaire in a contemporary design injection moulded PC optics lens for higher light efficiency and a larger illuminance range. Pole mounted LED luminaire of PDC aluminium housing with Corrosion resistance Powder coated finish using Nano Technology. All drivers should be isolated constant current type and have adddition protections like Reverse polarity, Mis wiring, Over voltage protection upto 320V, under voltage protection <80V cut off and recover at normal 100V Over temperature protection upto 120-150deg C off mode. Any short circuit the system should itself recover without any manual interuption. Operating voltage AC 140–275 Volt, frequency 50/60 hz, driver efficiency >85%, internal surge protection of 6 KV and additional 20KV SPD inside the fitting, THD <10%, P.F. ≥0.95, CRI ≥70, operating temperature of 0 to 50 Deg C. Life expectancy of LED with minimum 50000 Burning Hours at L70 as per LM80 extrapolation along with IES TM-21-11, CCT 3000 K (As per ANSI Bin) with MacAdam value of SDCM<5. Maximum power consumption should not be more than the specified wattage rating and Fixture shall be of relevant BIS standard and CE, RoHS certified. Manufacturer's Name Engraved/Embosing on housing, complete in all respect including external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable with all neccessary safety as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Watt. LM79 & LM80 test report, BIS certificate of driver and luminaire and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. Thermal management of aluminium housing should be such that LED junction temperature shall not rise above 80°C.(Approved Make: Havells/Crompton/Wipro/Lighting Technologies/Panasonic/Philips). |
| 43 | Type L3 - Supply & fixing of 35 W LED Post Top light, IP66 and IK08 protected outdoor architectural luminaire in a contemporary design injection moulded PC optics lens for higher light efficiency and a larger illuminance range. Pole mounted LED luminaire of PDC aluminium housing with Corrosion resistance Powder coated finish using Nano Technology. All drivers should be isolated constant current type and have adddition protections like Reverse polarity, Mis wiring, Over voltage protection upto 320V, under voltage protection <80V cut off and recover at normal 100V Over temperature protection upto 120-150deg C off mode. Any short circuit the system should itself recover without any manual interuption. Operating voltage AC 140–275 Volt, frequency 50/60 hz, driver efficiency >85%, internal surge protection of 6 KV and additional 20KV SPD inside the fitting, THD <10%, P.F. ≥0.95, CRI ≥70, operating temperature of 0 to 50 Deg C. Life expectancy of LED with minimum 50000 Burning Hours at L70 as per LM80 extrapolation along with IES TM-21-11, CCT 3000 K (As per ANSI Bin) with MacAdam value of SDCM<5. Maximum power consumption should not be more than the specified wattage rating and Fixture shall be of relevant BIS standard and CE, RoHS certified. Manufacturer's Name Engraved/Embosing on housing, complete in all respect including external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable with all neccessary safety as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Watt. LM79 & LM80 test report, BIS certificate of driver and luminaire and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. Thermal management of aluminium housing should be such that LED junction temperature shall not rise above 80°C.(Approved Make: Havells/Crompton/Wipro/Lighting Technologies/Panasonic/Philips). |
| 44 | Type L4 - Supply & fixing of 45 W LED Post Top light, IP66 and IK08 protected outdoor architectural luminaire in a contemporary design injection moulded PC optics lens for higher light efficiency and a larger illuminance range. Pole mounted LED luminaire of PDC aluminium housing with Corrosion resistance Powder coated finish using Nano Technology. All drivers should be isolated constant current type and have adddition protections like Reverse polarity, Mis wiring, Over voltage protection upto 320V, under voltage protection <80V cut off and recover at normal 100V Over temperature protection upto 120-150deg C off mode. Any short circuit the system should itself recover without any manual interuption. Operating voltage AC 140–275 Volt, frequency 50/60 hz, driver efficiency >85%, internal surge protection of 6 KV and additional 20KV SPD inside the fitting, THD <10%, P.F. ≥0.95, CRI ≥70, operating temperature of 0 to 50 Deg C. Life expectancy of LED with minimum 50000 Burning Hours at L70 as per LM80 extrapolation along with IES TM-21-11, CCT 3000 K (As per ANSI Bin) with MacAdam value of SDCM<5. Maximum power consumption should not be more than the specified wattage rating and Fixture shall be of relevant BIS standard and CE, RoHS certified. Manufacturer's Name Engraved/Embosing on housing, complete in all respect including external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable with all neccessary safety as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 lm/Watt. LM79 & LM80 test report, BIS certificate of driver and luminaire and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. Thermal management of aluminium housing should be such that LED junction temperature shall not rise above 80°C.(Approved Make: Havells/Crompton/Wipro/Lighting Technologies/Panasonic/Philips). |
| 45 | Supply & erection of 3.0 m decorative pole (cast-Al / GI, black powder coat) with base flange, anchor bolts, base door - for L2. |
| 46 | Supply & erection of 4.0 m decorative pole as above - for L3. |
| 47 | Supply & erection of 4.5 m decorative pole as above - for L4. |
| 48 | PCC (1:2:4) / RCC M20 foundation for decorative poles, approx. 450x450x900 mm, with J-bolts, template and cable entry pipe. |
| 49 | Bollard pedestal (pindi) 1' x 1' x 2½' in C.C masonry with 4' steel pipe for cable entry. |
| 50 | Laying of one PVC/XLPE 1.1 kV cable not exceeding 25 sq mm direct in ground incl. excavation, sand cushioning, protective covering and refilling the trench. |
| 51 | Supply & laying of 50 mm HDPE DWC pipe in trench for cable protection. |
| 52 | Supply & laying of 80 mm medium GI pipe for road / hardscape crossings (provisional). |
| 53 | Laying of one PVC/XLPE 1.1 kV cable not exceeding 25 sq mm in existing/new pipe at crossings. |
| 54 | Cable pull / inspection chamber 450x450x600 mm brick masonry with cover (provisional, 4 per site). |
| 55 | Cable route markers (precast RCC) at 30 m intervals and bends. |
| 56 | Supply of 4C x 6 sq mm aluminium XLPE armoured cable, 1.1 kV, ISI marked (Make: Havells/Polycab/KEI/V-Guard/Gloster). |
| 57 | Cable end termination with double-compression brass glands and crimped lugs for 4C x 6 sq mm cable. |
| 58 | Supply & fixing of 3C x 2.5 sq mm multicore flexible round copper cable inside poles/bollards (Make: Havells/Polycab/KEI/V-Guard/Gloster). |
| 59 | Pole-base junction box: DP MCB enclosure with 6 A SP 'C' curve MCB, connections complete - for each pole & bollard. |
| 60 | Providing & fixing 6 SWG GI wire for loop earthing along cable route, bonded to each pole/bollard and panel. |
| 61 | Maintenance-free chemical earthing, 2 m long 14 mm dia copper-bonded steel rod, 50 kg compound, with accessories. |
| 62 | Supplying & laying 25 x 5 mm GI strip from earth pits to lighting panels. |
| 63 | Outdoor lighting control panel / feeder pillar, IP55, with 32 A TPN MCB incomer, energy meter, astronomical timer, contactors, SPD, outgoing MCBs - complete. |
| 64 | PCC plinth 300 mm high for control panel with cable entry pipes. |
| 65 | Power supply connection from DISCOM / existing LT feeder pillar to each panel incl. liaisoning (provisional). |
| 66 | Supply & fixing of danger board 200x150x2 mm on each panel. |
| 67 | Warm-white LED flexi strip with driver under plaza seating (provisional). |
| 68 | LED up-light for sculptures / feature trees (provisional). |
| 69 | Maintenance, Year-02 |
| 70 | Maintenance, Year-03 |
| 71 | Maintenance, Year-04 |
| 72 | Maintenance, Year-05 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender