Tender For Development Of Gym Cum Wellness Centre At Chanderkote Phase-1,Panchayat :- Kunfer,Block :- Ramban,Under Head:- Ddc,For The Year 2026-27.Nit No:- 84 Of Rew Ramban 2024-25
Tender Value
14.87 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
1 days left
EMD
29740
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramban → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Gym Cum Wellness Centre At Chanderkote Phase-1,Panchayat :- Kunfer,Block :- Ramban,Under Head:- Ddc,For The Year 2026-27.Nit No:- 84 Of Rew Ramban 2024-25
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:ALL KINDS OF SOIL |
| 2 | Dry stone pitching( any thickness) including supply of stones & preparing surface complete |
| 3 | Dry random rubble masonry with hard stone in foundation and plinth with out bound stone. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10MIX with 40mm nominal aggregates all complete. |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement :1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more (To be paid as per actual). |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, pillars, piers, abutments, posts and struts. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for:Suspended floors, roofs, landings, balconies and access platforms |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form work for: Edges of slab Slab |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 14 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 15 | Dumping Stone in Horizontal including Supply |
| 16 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 17 | CEMENT PLASTER (IN COARSE SAND) 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 coarse sand) |
| 18 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40mm thick with 20 mm nominal size stone aggregate. |
| 19 | Providing and fixing 1 mm thick MS sheet door with frame of 40*40*6mm angle iron and 3mm gusset plate at junctions and corners all necessary fittings |
| 20 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 22 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):Kail wood |
| 23 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Kiln seasoned |
| 24 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws .Kiln seasoned |
| 25 | Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc. |
| 26 | Providing and applying white cement based putty of average thickness 2 mm,of approved brand and manufacture,over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 28 | Applying priming coat : with ready mixed pink or grey primer of approved brand and manufacture onwood work ( hard and soft wood) |
| 29 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade . Two or more coats on new work |
| 30 | Point wiring (including metallic switch box &sheet and switches, sockets,conduits, lampholders/ceiling roses etc) with1.5sq. mm. PVCinsulated cable FRLS with copper multi strandconductor ISI marked in surface rigid steelconduit ISImarked of suitable size and 1.5sq.mm. PVC insulated FRLS copper earth Ncontinuity conductor of green/red colour inside conduit including painting, screwless connector for joints etc. as required as per specification for Light point/fan points. |
| 31 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.15mm nominal outer dia pipes |
| 33 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour 15 mm nominal bore with 45 cm length. |
| 34 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:32mm dia pipe |
| 35 | P/F PVC pipes for drainage of waste water etc.incl fittings all complete |
| 36 | P/F brass bib cock of approved quality 15mm nominal bore. |
| 37 | P/F Wash basin. |
| 38 | P/F ball valve of approved quality with fitting all complete. |
| 39 | P/F PTMT soap dish holder having length of 138mm,30breadth102mm height of 75 mm with conceiled fitting arrangements. |
| 40 | P/F 1000 ltrs water storage tank with fittings all complete |
| 41 | Carriage of Cement from source to site by mechanical transport or animal transport or by head load |
| 42 | Carriage of Steel from source to site by mechanical transport or animal transport or by head load |
| 43 | Carriage of Sand from source to site by mechanical transport or animal transport or by head load |
| 44 | Carriage of Stone Aggregates from source to site by mechanical transport or animal transport or by head load |
| 45 | Carriage of Bricks from source to site by mechanical transport or animal transport or by head load |
| 46 | Carriage of Stones from source to site by mechanical transport or animal transport or by head load |
| 47 | CIB( citizen information board) size 2'6''x3'6''x0'9''( complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender