Housing Urban and Rular Development Local Bodies Closing in 4 days TDR #58499822

Tender For Upgradation And Finishing Works Of Extended Part Of Community Hall At Village Raipur,Panchyat Raipur Upper A,Block Bhalwal(Ac Jammu North)Fy 2026-27

Issued by Local Bodies · Jammu, Jammu and Kashmir
Tender Value
3.36 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
4 days left
EMD
6720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Upgradation And Finishing Works Of Extended Part Of Community Hall At Village Raipur,Panchyat Raipur Upper A,Block Bhalwal(Ac Jammu North)Fy 2026-27

BOQ

Name of Work:- UPGRADATION AND FINISHING WORKS OF EXTENDED PART OF COMMUNITY HALL AT VILLAGE RAIPUR,PANCHYAT RAIPUR UPPER A,BLOCK BHALWAL(AC JAMMU NORTH)FY 2026-27
Sl. No. Item Description
1Brick work with brick of class designation 75 above plinth level upto floor V level in cement mortar 1:6
2Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
3Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel of 1.25mm/1.60mm thickness including hinges jamb, lock, jamb, bead , including M.S pressed butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge Profile B Fixing with adjustable lugs with split end tail to each jamb
4Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to steel windows by welding
5Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood
6Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood
7Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. : Second class Kail wood
8Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 5 ply, 9 mm thick, Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type
9Providing/laying 12 mm cement plaster of mix 1:6 fine sand
10Providing 15 mm cement plaster of mix 1:6 fine sand
116 mm cement plaster to celling of mix 1:3 fine sand
12Providing and Laying of River Bed Material (R.B.M)/ Nallah bed Material (N.B.M) including spreading, consolidation complete in all respect including Loading, unloading and carriage completeUnder Flooring
13Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
14Providing and Laying and Filling of brick bats for Flooring
15Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
16Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm (Matt Finish)
17Providing and laying Vitrified tiles in different sizes (thickness to bespecified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete Size of tile 600x600 mm
18Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete1 mm thick
19Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
20Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
21Painting with symthetic enamel paint of approved brand over a priming coat red oxide on new steel work two or more coats
22Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix)
23P/Laying of cement conct. 1:3:6 Of specified grade excluding the cost of form work, cement using 20mm N/ size of agg
24Supply and Dumping of Stone boulder
25Centering and shuttering including strutting propping etc and removal of form for foundation footings, bases of columns etc for mass concret.
26Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Single rubber stopper
27Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete :window(150x10 mm)
28Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete :Door(200x10 mm)D.Vent(200x10mm)
29Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm
30Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm
31Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed pvc conduit, with pianotype switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
32Supplying & fixing 1200 mm sweep ceiling fan of standard quality with 1'-6\\" long fan rod and necessary connections complete job
33Supplying & fixing 400 mm sweep Swing wall mounted oscalating fan (50 w) of ISI marked Branded and necessary connections complete job
34Supplying and fixing of 20/22watt LED 4feet tube light fitting/fixture aluminnium hosing with 2000 lumens and min lumen sefficiency 100 Lumens/watt
35Carriage of material within avg. lead from source to site of work(To be paid as per actual) Sand and agg 20 km by M/T
36Stones 5 km by M/T (To be paid as per actual)
37Bricks 15 km by M/T (To be paid as per actual)
38Providing and Fixing sign board incl writing, painting etc Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58499822
AUTHORITY Local Bodies
TENDER VALUE 3.36 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Upgradation And Finishing Works Of Extended Part Of Community Hall At Village Raipur,Panchyat Raipur Upper A,Block Bhalwal(Ac Jammu North)Fy 2026-27
Basic Detail
Tender No e-NIT No. 774-REWJ of 2026-27 dated 12-11-2026
Bidding Type Tender
Location
City Jammu
State Jammu and Kashmir
Key Dates
Publish Date 12 Nov 2026
Submission Date 25 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 3.36 Lakhs
Tender Fee 500
EMD 6720
Exemption Not Available
Document List
4e93f6ec-7a4a-4fc8-b266-3ff6cc3bc8aa.html
BOQ_1123565.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

4e93f6ec-7a4a-4fc8-b266-3ff6cc3bc8aa.html

xls

BOQ_1123565.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender