Tender For Construction of Chailla Neripul Yashwant Nagar Kumarhatti Road Km 0/000 To 84/825. Portion 18/655 To 54/655 (Sh:- F/C Widening, R/Wall, Sub- Grade And Earthen Shoulder, M/T, Parapets, Crash Barrier, Drain, Road Furniture & Edge Line, Hume
Tender Overview
Project Description
Tender for Construction of Chailla Neripul Yashwant Nagar Kumarhatti Road Km 0/000 To 84/825. Portion 18/655 To 54/655 (Sh:- F/C Widening, R/Wall, Sub- Grade And Earthen Shoulder, M/T, Parapets, Crash Barrier, Drain, Road Furniture & Edge Line, Hume Pipe Culvert, Slab Culvert, Crate Wall In Sumping Side Km 18/655 To 30/0) Under Crif.
BOQ
| Sl. No. | Item Description |
| 1 | Earth Work |
| 2 | Excavation for roadway in hilly area in all height and depths and in all kinds of soil by manual /mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-charge at site according to the MORTH technical specification Section 300 and sorting out useful materials and stacking the same within all leads and lifts in acquired width of road and transportation of un-useful material for filling in road way, camber, embankment for grade improvements and disposal of all surplus material to the dumping sites to be arranged by the contractor at his own risk and cost through all mode of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tools, equipments and safety measures and others incidentals necessary to complete the work by mechanical means/labour if required. All usefull material such as stone shingle aggregate and slates etcetra shall be sorted out and stacked in proper stack.(Recovery of useful stone material i.e. 51329.23 cubic metre shall be made from the contractor @ Rs. 300/- (Rupees three hundred only) per cubic metre amounting to Rs. 15398769/- (One Crore Fifty Three Lac Ninety Eight Thousand Seven Hundred & Sixty Nine only) on pro rata basis for the quantity of earth work effected. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 3 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures or other sources graded and compacted transporting to site, spreading, grading in 200mm (Two hundred millimetre) thickness with three wheel 80-100 (eighty- hundred) KN static weight road roller to meet requirement of table 300.1 & 300.2 as per MORTH technical specifications section 300 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 4 | Earth work in excavation for all type of road structure such as retaining walls,breast walls, culverts, drains and parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks (Where blasting is prohibited) as per drawings and MORTH technical specifications section 300 and as per direction of the Engineer-in-charge by mechanical means and labour if required including setting out, construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimeters) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantom of water including cleaning of slush which may arrise out during dewatering as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 5 | Providing and laying mechanically mixed and vibrated plain/reinforced cement concrete in sub/ super structure of grade M-15 (M- fifteen) designed mix with cement contents not less than 275 Kg (Two hundred seventy five kilogram) per cubic metre with crushed stone aggregate 20mm (Twenty millimetre) nominal size on ground or under water and curing complete for 14 ( fourteen) days including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths including the cost of form work in all type of structure as per drawings and MORTH technical specification section 1500, 1700, 2100 and 2200 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in open foundation for all type of structure complete of plain cement concrete nominal mix 1:3:6( One cement :three sand:six graded crushed /broken stone aggregate 40mm (Forty Millimeter) nominal size in or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/ depths including the cost of form work as per drawings and technical specification clauses 2100 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 7 | Back filling with granular material behind abutment, wing wall and return wall with a thickness of 600mm complete as per drawings & MORTH technical specification section 2200 and Clause 710.1.4. of IRC :78 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 8 | Earth Filling above Hume pipe as per drawing and technical specification including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 9 | Providing and fixing 100mm (One hundred millimetre) diametre PVC pipe weep holes in brick masonry /stone masonry /plain reinforced concrete abutment, wing wall, return wall extending through the full width of the structures with slope of 1(V):20(H) [one vertical and twenty horizontal) towards draining face complete as per drawing and MORTH technical specification clause 2706 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 10 | Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all leads and lifts, transporting to site and compacted/rolling with vibrator roller 8 - 10 (Eight to Ten) Tonne capacity grading to required slope and compacted to meet requirement of table 300.2 as per MORTH technical specifications section 400 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 11 | Construction of Sub-grade and earthen shoulders :-Plain/Reinforced Cement Concrete PCC Grade M15 in paved shoulder to specified lines and grades including mixing, placing, screeding, forming dummy/construction joints, joint sealing complete as per Drawing and Technical Specifications 600,1500, 1700 & 2100 and curing complete including the cost of form work and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 12 | Loosening of the ground upto a level of 500mm (five hundred millimetre) below the sub-grade level, watered, graded and compacted in layers to meet requirement of table 300-2 for sub-grade construction as per MORTH technical specification section 300 with power road roller 8-10 tonne (Eight-Ten tonne) capacity for sub grade as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 13 | Scarifying the existing bituminous road surface by mechanical means upto any depth and disposal of scarified material within all leads and lifts as per MORTH technical specification section 300 complete in all respect and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 14 | Construction of gravel/soil-aggregate base by providing well graded material, (as per table 400.1) spreading in uniform layers with Tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density,complete as per Technical Specifications Clause 400 and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 15 | Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) Specification in seprate layers (1st 125mm & 2nd 125mm layers shall be laid and compacted separately, one layer at a time, ensuring that the required thickness and specified density of each layer are achieved before laying the subsequent layer) including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting each layers seperately with a smooth wheel vibratory roller to achieve the desired density, complete in all respect as per clause 400.6 of MORTH specification for road and bridge (with 5th revision) and hauling of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 16 | Providing and applying primer coat with Bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85(One) kilogramme per square meter using mechanical means as per Technical Specification Clause 502 (Five hundred Two) including carriage of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 17 | Providing and applying tack coat with Bitumen emulsion (RS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.275 kilogramme per square meter using mechanical means as per Technical Specification Clause 503 (Five hundred Three) including carriage of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in-Charge The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 18 | Providing and laying Dense graded Bituminous Macadam (DBM) with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the 6 hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No.505 complete in all respects. including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 19 | Providing and laying bituminous Concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder@ 5.4 to 5.6 per cent of mix and filler, including anti stripping agent upto 1% of bitumen weight as per IS-14982:2022, transporting the hot mix to work site, laying with a hydrostatic praver finisher with sensor control to the required grade, level and alignment, rolling with soomth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause NO. 507 complete in all respects including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 20 | Providing and errecting a \\"W\\" metal beam crash barrier comprising of 3mm (Three millimetre) thick corrugated sheet metal beam rail, 70cm (Seventy centimetre) above road/ground level, fixed on ISMC series channel vertical post, 150x75x5mm (One hundred fifty into seventy five into five millimetre) spaced 2 m (Two metre) centre to centre, 1.8 m (One decimal eight metre) high, 1.1 m (One decimal one metre) below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5 mm (One hundred fifty into seventy five into five millimetre), 330 mm (Three hundred thirty millimetre) long complete as per MORTH Technical Specification section 800 Item to include all as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 21 | Providing and laying mechanically mixed and vibrated plain cement concrete grade M-20 (M-Twenty) 20mm (Twenty millimetre) nominal size with cement content not less than 344 kg per cubic meter in open foundation like drain etcetra as per drawings and MORTH technical specifications section 1500, 1700 and 2100 including the cost of form work and curing complete as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 22 | Providing and laying mechanically mixed and viberated plain cement concrete M-20 (M-Twenty) in substructure designed mix with cement contents not less than 344 Kg (Three hundred forty four kilograms) per cubic metre with 40mm (Forty millimetre) nominal size crushed stone aggregate (extra cement as per design mix above the minimum cement contents specified shall not be paid extra) in abutment anf Toe wall etcetra as per drawings and MORTH technical specification section 1500, 1700 and 2200 including form work and curing complete and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals..The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 23 | Providing and fixing 5th (Fifth) kilometre stone (precast with reinforced cement concrete M-15 grade) of standard design as per IRC :8-1980 fixing in position including painting and printing etcetera as per drawing and MORTH technical specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 24 | Providing and fixing Ordinary kilometre stone (precast with reinforced cement concrete M-15 grade) of standard design as per IRC :8-1980 fixing in position including painting and printing etcetera as per drawing and MORTH technical specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 25 | Providing and fixing Hectometre-200meter stone (precast with reinforced cement concrete M-15 grade) of standard design as per IRC :8-1980 fixing in position including painting and printing etcetera as per drawing and MORTH technical specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 26 | Direction and place identification Signs with size Less than 0.9 sqm size Board. Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and as per techincal specification section 800 including hauling of material in all leads. lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 27 | Direction and place identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro-\reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on mild steel angle iron posts 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and as per techincal specification section 800 including hauling of material in all leads. lifts as per the entire satisfaction and direction of Engineer-in-charge The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 28 | Providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of Class-B Type IV retroreflective sheeting fixed over 2 mm thick Aluminiumsheeting vide clause 801.3, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3mm Angle mounted on a mild steel circular pipe 65 NB ,3.2 mm thicknness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as perapproved drawing. The sign shall be maintained as per section 12 of IRC 67. as per approved drawing and as per techincal specification section 800 including hauling of material in all leads. lifts as per the entire satisfaction and direction of Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 29 | Providing and laying of hot applied thermoplastic compound paint 2.5mm (two point five millimetre) thick including reflectrising glass beads @ 250 gms (two hundred fifty grams) per square meter area , thickness of 2.5mm (two point five millimetre) is exclusive of surface applied glass beads by road marking machine as per IRC 35. The finished surface to be level, uniform and free from streaks and holes as per MORTH technical specification section 800 and as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 30 | Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973 and as per techincal specification section 800 including hauling of material in all leads. lifts as per the entire satisfaction and direction of Engineer-in-charge The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 31 | Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint complete as per techincal specification section 800 including hauling of material in all leads. lifts as per the entire satisfaction and direction of Engineer-in-charge The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 32 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 , the drawings and as per techincal specification section 800 including hauling of material in all leads. lifts as per the entire satisfaction and direction of Engineer-in-charge The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 33 | Providing and laying (to level or slope) 1000mm dia (One thousand millimeter) diametre prestressed / reinforced cement concrete heavy duty non pressure pipes IS Class NP-3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (One cement isto two sand) but excluding the cost of excavation, protection works, back filling, concrete and masonry work in head walls and parapets as per drawing and MORTH technical specifications section 2900 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 34 | Supplying fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and MORTH technical specifications section 1600 and 2200 including cutting, bending, binding, straightening and placing in position complete in all respect including cost of binding wire upto all height and depth as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 35 | Providing and laying of boulder apron laid in wire crates made with 4mm (four millimetre) dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm(one hundred millimetre into one hundred millimetre) mesh (weaved diagonally) including 10 (ten) per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg (twenty five kilograme) each. as per drawing and technical specifications clause 1301 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 36 | Providing and laying RCC M25 reinforced cement concrete in super-structure as per drawing and technical specification RCC Grade design mix to obtain minimum compressive strength of M-25 (M-Twenty five) using cement contents not less than 403Kg (Four hundred Three kilogram) per cubic metre with crushed stone aggregate 20mm (Twenty millimetre) nominal size in deck slab including form work and staging in all heights and curing complete as per drawings and MORTH technical specification section 1500, 1700 and 2300 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 37 | Providing and laying mechanically mixed and vibrated reinforced cement concrete grade M-30 ( M-Thirty) design mix with minimum cement contents not less than 407 Kg (Four hundred seven kilograms) per cubic metre with 20mm (Twenty millimeters) nominal size graded crushed stone aggregate (extra cement as per design mix above the minimum cement contents specified shall not be paid extra) and curing complete in approach slab/ wearing coat including cost of form work (reinforcement will be measured and paid for separately)complete as per drawing and MORTH technical specification section 1500, 1600, 1700 and 2700 as directed by the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 38 | Providing and fixing drainage spouts complete with 100mm (One hundred millimetre) dia galvanized mild steel down pipe corrossion resistant structural steel grating complete as per Drawings and MORTH Technical Specifications section 2700 and as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender