Educational and Research Institute Boards / Undertakings / PSU Closing in 6 days TDR #58499488

Tender For Providing Connecting Bridge For Specially Abled Persons & Other Minor Works In Multi-Faculty Phase-I In H.P. University, Shimla-5.

Issued by Boards / Undertakings / PSU · Shimla, Himachal Pradesh
Tender Value
14.51 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
6 days left
EMD
29100
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Connecting Bridge For Specially Abled Persons & Other Minor Works In Multi-Faculty Phase-I In H.P. University, Shimla-5.

BOQ

Name of Work:- Providing Connecting bridge for specially abled persons & other minor works in Multi-Faculty Phase-I in H.P. University, Shimla-5.
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed upto all lead and lift.a) All kinds of soil.
2Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all heights, excluding the cost of centering, shuttering and finishing :-a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
3b) 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size).
4Centering and shuttering including strutting, propping etc. and removal of form for all heights :-a) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
5Steel work welded in built up sections, trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. a) In beams joists channels ,angles , tee ,flats with connection plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.
6Providing and fixing hard drawn steel wire fabric 25x25mm mesh of weight not less than 3.20 kg per sqm. to existing steel window frames etc. including 20x5 mm M.S.Flat acting as beading and including welding rigidly & including a priming coat of Red lead paint complete in all respect as per directions of Engineer-in-Charge.
7Providing and fixing 0.60mm thick Pre-Painted Steel Sheets on roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks, bolts and nuts 6mm dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.
8Providing and fixing ridges or hips 60 cm overall with 0.60mm thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks, bolts & nuts 6mm dia & pre-painted nuts 6mm dia & pre-painted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.
9Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge.
10Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.a) Size of Tile 600x600 mm.
11Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :-a) Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.
12Public Health :- Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sq. cm including filling the joints with approved adhesive complete.(Supreme Industries/ vectus/ Finolex Industries ).a) 150 mm dia.
13b) 110 mm dia.
14Providing and fixing PVC Collar including fixing with approved adhesive etc. complete.(Supreme Industries/ vectus / Finolex.) a) 150 mm dia.
15b) 110 mm dia.
16Providing and fixing PVC Plain Bend ISI Marked including fixing with approved adhesive etc. complete.(Supreme Industries/ vectus / Finolex Industries.)a) 150 mm dia
17b) 110 mm dia.
18Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:- (Hindware, Cera, Somany).a)White Vitreous China flat back Wash basin size 550x400 mm with single of 15 mm C.P. brass pillar taps.
19Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.( Hindware, Cera, Somany).
20Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. (Hindware, Cera, Somany).a) 15 mm nominal bore. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58499488
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 14.51 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Himachal Pradesh University
Work Description Tender for Providing Connecting Bridge For Specially Abled Persons & Other Minor Works In Multi-Faculty Phase-I In H.P. University, Shimla-5.
Basic Detail
Tender No No.8-28/Const./HPU/2026-18
Bidding Type Tender
Location
City Shimla
State Himachal Pradesh
Key Dates
Publish Date 12 Nov 2026
Submission Date 24 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 14.51 Lakhs
Tender Fee 590
EMD 29100
Exemption Not Available
Document List
4190f0c3-76be-4518-a27e-03f6bcadff3d.html
BOQ_220778.xls
TenderDocument.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

4190f0c3-76be-4518-a27e-03f6bcadff3d.html

xls

BOQ_220778.xls

pdf

TenderDocument.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender