Tender For General-Annual Plan 2026-27-Aee(Agri)-Special Repair Of Workshop Building At The Office Of The Assistant Executive Engineer (Agriculture) Ernakulam For Establishment Of Agricultural Machinery Clinic With Farmers Waiting Area And Washroom F
Tender Overview
Project Description
Tender for General-Annual Plan 2026-27-Aee(Agri)-Special Repair Of Workshop Building At The Office Of The Assistant Executive Engineer (Agriculture) Ernakulam For Establishment Of Agricultural Machinery Clinic With Farmers Waiting Area And Washroom Facilities-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Special Repair Works |
| 2 | 15.23.1:Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 3 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 4 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 5 | 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 6 | OD3632/2026-2027:60.7.1. DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 7 | 9.121:Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 8 | 9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames. |
| 9 | 11.41A.2.2: Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of sizeSize of Tile 600 x 1200 mm |
| 10 | 11.48.4:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 1000x1000 mm |
| 11 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 12 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 13 | 13.99.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 14 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 15 | OD2054/2026-2027:Modified 17.3.1 Providing and fixing premium quality single-piece pedestal type European Water Closet (EWC) 10 years warrenty manufactured from high-grade white vitreous china with integrated single-piece cistern and closet, complete with soft-close seat cover, dual/powerful flushing system, easy-clean rimless design, and anti-bacterial glaze finish. The water closet shall be of approved make, incorporating a water-efficient flushing mechanism, concealed trap, and smooth stain-resistant surface for easy maintenance. The unit shall be supplied and fixed complete with all necessary accessories, including inlet and outlet connections, angle valve, braided flexible hose, floor fixing bolts, rubber gaskets, wax seal/connector, flush mechanism, seat cover fittings, and all required CP and PVC fittings. The installation shall include cutting and making good the floor/wall wherever required, testing for leak-proof performance, and commissioning complete as directed by the Engineer-in-Charge. |
| 16 | OD2056/2026-2027:Modified 17.4.3 Providing and fixing premium quality wall-hung ceramic urinal of size 15\\"× 13\\"× 25\\" (approx. 380 × 330 × 635 mm),and the urinal separation manufactured from high-grade white ceramic with glossy finish and anti-bacterial, stain-resistant, non-porous glaze, complete with 10-year manufacturer's warranty. The urinal shall be of wash-down type designed for efficient waste removal with minimum water consumption and shall be suitable for connection with a urinal spreader flushing system to ensure uniform water distribution over the entire inner surface for enhanced cleaning and hygiene. The urinal shall be compatible with angle valve/flush valve connections and shall be provided complete with push-on (push-type) tap, urinal spreader, waste coupling, bottle trap, CP brass fittings, angle valve, inlet and outlet connections, GI/PVC clamps, all necessary fixing accessories, and connection materials required for complete installation. The non-porous ceramic surface shall resist bacterial growth, stains, and odour formation, while the efficient drainage system with bottle trap shall ensure smooth wastewater disposal and prevent foul smell.The item includes all labour, materials, fixing, testing, commissioning, cutting and making good of walls/floors wherever required, complete as directed by the Engineer-in-Charge. |
| 17 | OD2057/2026-2027:Supply, installation, testing and commissioning of 150 mm Exhaust Fan with PVC SleeveProviding, installing, testing and commissioning of 150 mm (6\\") premium BLDC exhaust fan of approved make, such as Atomberg Studio Exhaust Fan or equivalent, complete with BLDC motor (6.8 W), low-noise operation, approximately 2000 RPM, glossy white finish, and 2-year manufacturer's warranty, suitable for bathroom and kitchen applications.The work shall include core cutting through the wall to form a 150 mm diameter opening, supplying and fixing 150 mm dia PVC pipe (6 kg/cm² pressure class) as a wall sleeve, sealing the annular gap with cement mortar and making good the wall surface to match the existing finish. The exhaust fan shall be securely fixed to the PVC sleeve with all necessary mounting screws, clamps, brackets and accessories.The item shall also include wiring from the exhaust fan to the nearest existing electrical point using suitable size FRLS PVC insulated copper conductor wires in PVC conduit/trunking wherever required, complete with all accessories, terminations, testing and commissioning for proper operation.The rate shall include the cost of all materials, labour, tools, cutting, drilling, making good, electrical connections, testing and commissioning, complete as directed by the Engineer-in-Charge |
| 18 | OD2058/2026-2027:Modified 9.7.7.1 Providing and fixing 5 mm thick clear float plain glass of approved make and quality for table top, cut to the required size and shape. The glass shall be free from bubbles, waves, scratches, or other visible defects. All four edges shall be machine ground and mirror polished to provide smooth, safe, and aesthetically finished edges. The glass shall be placed over the existing table top with suitable transparent rubber pads/spacers or approved fixing arrangement wherever required to prevent movement and damage. The item includes all materials, cutting, edge grinding, mirror polishing, handling, transportation, labour, and fixing complete as directed by the Engineer-in-Charge. |
| 19 | OD2059/2026-2027:Modofied 17.7.2 Providing, fixing, testing, and commissioning of premium quality countertop (table top/over counter) ceramic wash basin of approved make, Glossy White finish, approximately 24\\" × 14\\" × 5\\" (or nearest square/equivalent size), manufactured from high-grade vitreous ceramic with anti-bacterial glaze, stain-resistant, scratch-resistant, and easy-to-clean surface.The wash basin shall be installed over a 20 mm thick premium Black Granite countertop of size 0.50 m × 0.80 m, accurately cut to suit the basin profile. The exposed edges of the granite shall be machine finished with mirror polishing.The item shall include 30 cm high premium chrome-plated (C.P.) brass high-neck pillar cock, 32 mm C.P. brass click-clack (pop-up) waste coupling, C.P. brass bottle trap, 15 mm angle valves, braided stainless steel flexible connection hoses, inlet and outlet connections, sanitary-grade silicone sealant, all necessary C.P./PVC fittings, fasteners, brackets, and fixing accessories required for a complete installation.The work shall also include cutting and making good the wall/counter wherever required, connecting to the existing water supply and drainage system, testing for leak-proof performance, cleaning, and commissioning complete. The rate shall include the cost of all materials, labour, transportation, fittings, fixtures, accessories, and all incidental works necessary for the satisfactory completion of the installation as directed by the Engineer-in-Charge. |
| 20 | OD2060/2026-2027:Modified 50.17.1.1 Supplying and fixing Stainless steel door handle including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. |
| 21 | OD2061/2026-2027: Modified 21.3.3 Providing and fixing 6 mm thick glazing quality mirror, all edges machine cut and polished, including drilling holes and fixing to wall with stainless steel screws, chrome-plated decorative caps, rubber washers/spacers, and all necessary fittings and accessories, complete as directed by the Engineer-in-Charge. |
| 22 | OD2062/2026-2027:Modified 15.9.15.1 Supplying and fixing SS sliding shutter bolt with locking clamps to FRP toilet door, complete with stainless steel screws and all necessary fittings, as required. |
| 23 | OD2063/2026-2027:Supplying and fixing 200 mm SS aldrop for FRP Door |
| 24 | 50.18.8.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2 |
| 25 | 50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia 10Kgf/cm2 |
| 26 | OD2065/2026-2027:Modified 50.12.2.1 Providing and fixing premium quality 4 mm thick UV-coated textured solid polycarbonate roofing sheets manufactured from 100% virgin polycarbonate resin with co-extruded UV protection, having excellent weather resistance, flame-resistant properties, high light transmission with diffused daylight effect, superior strength-to-weight ratio, and impact strength approximately 200 times greater than ordinary glass, fixed to the supporting framework with approved aluminium/GI fixing profiles, stainless steel self-drilling/self-tapping screws, EPDM sealing washers, closure profiles, end caps, and weatherproof silicone sealant, including cutting, drilling, shaping, edge finishing, sealing, lapping wherever required, all fittings, accessories, labour, scaffolding, transportation, and all incidental charges for complete installation on horizontal, vertical, inclined, or curved surfaces, excluding the cost of purlins, rafters, trusses, and other structural supporting members, complete as directed by the Engineer-in-Charge. |
| 27 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 28 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 29 | OD2072/2026-2027:Modified 50.10.2Providing and fixing hot-dip galvanized (G.I.) tubular purlins of approved size and thickness using square, rectangular, or circular hollow sections, including machine bending to the required profile wherever necessary, cutting, drilling, aligning, welding, hoisting, and fixing to steel trusses with bolts, nuts, cleats, brackets, and all necessary fittings. The work shall include touch-up with zinc-rich cold galvanizing paint at cut and welded portions, complete with all labour, tools, scaffolding, transportation, consumables, and incidental charges required for satisfactory completion of the work, as per approved drawings and as directed by the Engineer-in-Charge. |
| 30 | OD2074/2026-2027:Modified 13.52.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate preparation of surface, etc. complete.On steel work |
| 31 | 16.69:Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge) |
| 32 | 50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall |
| 33 | 50.18.8.9.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 |
| 34 | 50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow |
| 35 | 50.18.9.22.2:Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia 45 degree Elbow |
| 36 | OD2085/2026-2027:Providing and fixing 2.5 mm thick ferrocement sheet for fabricating a cabinet below the wash basin counter, consisting of side panels, bottom panel, back panel, shelves, front shutters and necessary supporting members, fixed securely to the wall with suitable fasteners. The ferrocement cabinet shall be designed to serve as a storage cabinet as well as a supporting base for 20 mm thick polished black granite countertop carrying an over-counter ceramic wash basin. The rate shall include all materials, labour, cutting, drilling, fixing, hinges, handles, magnetic catch, screws, locking arrangement, finishing of exposed edges, making openings for plumbing connections, transportation, loading, unloading, and all incidental charges complete as directed by the Engineer-in-Charge. |
| 37 | OD2086/2026-2027:Supply and installation of approved quality square uPVC Rain Water Gutter of 160 mm (6 inch) height, manufactured from 3 mm thick uPVC, including all necessary accessories such as drop outlets (dropsters), connectors, end caps, stop ends, expansion joints (where required), bends and fittings, complete. The gutter shall be fixed true to line and level using hot-dip galvanized iron (GI) gutter fixing clamps/brackets at 1000 mm centre-to-centre spacing, with stainless steel screws and suitable anchor fasteners. The work shall include cutting, jointing, sealing with approved sealant, alignment to the required slope for proper drainage, testing, and all labour, materials, tools, scaffolding, loading, unloading, transportation, and incidental charges complete as directed by the Engineer-in-Charge |
| 38 | 10.25.1:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete |
| 39 | 18.15.2:Providing and fixing brass bib cock of approved quality :20 mm nominal bore |
| 40 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 41 | OD2475/2026-2027:51.2.3. Filling with Quarry MuckFilling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade |
| 42 | OD2474/2026-2027:Modified 16.68 Providing and laying alredy existing 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 43 | OD2476/2026-2027:Modified 13.99.1 Painting with Exterior-grade paver/block coating better for weather resistance and durability paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 44 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 45 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 46 | 50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 47 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 48 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 49 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 50 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 51 | OD3634/2026-2027:Modified 50.18.9.22.1 Providing and fixing 110 mm dia PVC floor trap and Stainless steel antifloor gratings of approved quality, with deep seal, removable grating/cover and suitable inlet/outlet connections, including all necessary PVC fittings, solvent cement, jointing and making good, complete as directed by the Engineer-in-Charge. |
| 52 | 12.48:Providing & fixing on roof pressed clay tile (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) |
| 53 | 12.49:Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20 mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately ). |
| 54 | OD3649/2026-2027:Modified 13.99.1 Painting with weather coat roof tile epoxy paint paint of approved brand and manufacture of required colour to give an even shade :One or more coats on new work |
| 55 | 17.7.2:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap |
| 56 | 50.18.9.7.1:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 |
| 57 | OD3664/2026-2027:Supply, installation, testing and commissioning of a new 1 HP monoblock pump set, including suitable motor starter, electrical connections, necessary fittings, accessories and allied works, in place of the existing defective pump set. The work includes dismantling and removal of the existing pump set, positioning and fixing of the new pump set at the existing location, making necessary pipe connections, providing electrical connections and starter arrangements, and carrying out trial operation to ensure proper functioning of the pump set. The entire work shall be completed as per the manufacturer's specifications and to the satisfaction of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender