Tender For Recarpeting Of Perimeter Road At Coimbatore International Airport And Other Miscellaneous Works
Tender Value
2.38 Crore
Estimated cost
Bid Submission
04 Dec 2026
12 days left
EMD
7.16 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Recarpeting Of Perimeter Road At Coimbatore International Airport And Other Miscellaneous Works
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in soil with hydraulic excavator including cutting & loading in tippers, trimming bottom and side slopes in accordance with requirement of line, grades and cross section and transporting and unloading to the disposal location(s) including levelling and neatly dressing of disposed soil completely as directed by Engineer-In-Charge with all lifts and lead within Airport Premises. All kinds of Soil |
| 2 | Preparation and consolidation of sub grade with power road roller of 8 to 10 tonne capacity including dressing to camber,making good the undulations etc. and rerolling the sub grade as directed by Engineer-In-Charge |
| 3 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. : With material conforming to Grade-II (size range 53 mm to 0.075 mm) having CBR Value-25 |
| 4 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 5 | Providing and applying primer coat with bitumen emulsion SS1 grade conforming to IS:8887 on prepared surface of granular Base including clearing of surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means complete in all respects as per direction of Engineer-In-Charge. The contractor shall quote his rates assuming quantity of bitumen emulsion as 0.70 Kg/Sqm. If the actual quantity of bitumen emulsion varies from the quantity assumed above, necessary cost adjustment for deviation in the quantity of bitumen emulsion shall be done as per rate in actual supply voucher from nearest refinery at the time of execution. The rate of bitumen emulsion exclusive of GST shall only be considered for payment. |
| 6 | Providing and laying of Hot Mix Dense Bituminous Macadam (DBM) using crushed stone aggregate of quality, size and grading as specified and cement filler of quality as specific and Viscosity Grade Bitumen(Supplied in bulk) in proportions as per job mix formula and laid to specific levels, grade and camber as per specification, drawings and as directed by the Engineer-in-Charge including compacting with 8-10 tonne, preferably vibratory road roller of adequate capacity to achieve the specified values of compaction, strength, surface accuracy complete [for tendering purpose VG bitumen of grade*( VG-30)shall be taken as 110 Kg/m3 of mix supplied in bulk produced by Govt. Refineries and 2% cement by weight of aggregates as filler material] |
| 7 | Providing and applying tack coat using bitumen emulsion( Rapid setting RS1) complying with IS:8887 spraying the bitumen with mechanically operated spray unit, cleaning and preparing the existing pavement surface as per specifications.If the actual quantity of bitumen varies from the quantity specified, necessary cost adjustment for deviation in the quantity of bitumen shall be done as per rate in actual supply voucher from nearest refinery at the time of execution. The rate of bitumen exclusive of GST shall only be considered for payment. a) 0.20 kg /Sqm on bituminous surface |
| 8 | Providing and laying of Hot Mix Semi Dense Asphaltic Concrete(SDAC) using crushed stone aggregate of quality, size and grading as specified and 2% cement by weight of aggregates as filler of quality as specified and Viscosity Grade Bitumen (supplied in Bulk) in proportions as per job mix formula and laid to specified levels, grade and camber as per specification, drawings and as directed by the Engineer-in-Charge including compacting with 8-10 tonne, preferably vibratory road roller of adequate capacity to achieve the specified values ocompaction, strength, surface accuracy complete [for tendering purpose VG bitumen of grade VG-30 content shall be taken as 120 kg/m3 of mix supplied in Bulk produced by Govt. Refineries and 2% cement by weight of aggregates as filler material]. |
| 9 | Repairs to distressed bituminous surfaces of Runway and Taxiway in patches with Dense Asphaltic Concrete (DAC), including cutting the patch in a proper regular (square/rectangle) shape with a mechanical asphalt saw cutter equipped with diamond-impregnated or abrasive blades to create a clean, vertical, and square-edged boundary cut; removing the material inside the marked area using mechanical breakers, mechanical excavator equipment, etc.; loading into mechanical transport and carrying the dismantled bituminous material for a lead of up to 6 km for disposal within AAI land; cleaning and preparing the surface with mechanical brooming and compressed air to remove dust and debris; applying tack coat @ 0.2 kg/sqm; filling the patch with Dense Asphaltic Concrete (DAC) prepared as per the technical specifications of the item; compacting with a vibratory road roller and static road roller as per the technical specifications of the item; and finishing flush with the adjoining surface with no lipping or depression, etc., all complete as per technical specifications and directions of the Engineer-in-Charge.Note:The work is to be taken up during non-operational hours of the airport in coordination with Air Traffic Control (ATC), and no separate NOTAM will be issued.The size of the patches may start from 1.50 cum per patch as per actual requirements at the site.Bidders are advised to inspect the site and understand the executional and logistical difficulties, scope of the item, etc., before quoting their rates. |
| 10 | Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material within all lifts and lead upto 1km (by mechanical means). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender