Tender For Repair / Maintenance To App Membrane And Other Connected B/R Works At Kotdwara Under Age(I) Lansdowne.
Tender Value
26 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
52000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pauri Garhwal → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance To App Membrane And Other Connected B/R Works At Kotdwara Under Age(I) Lansdowne.
BOQ
| Sl. No. | Item Description |
| 1 | Removing existing water proofing treatment what so ever exist (except concrete padding) and removing debris/ rubbish materials off the site complete all as specified and directed. |
| 2 | M&L for roughening surfaces of old concrete floor by picking, sweeping clan and washing down with water to remove dust & brushing neat cement slurry with 3 Kgs of cement per sqm etc all as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | M&L for Plain cement concrete (PCC) padding as in roof in cement concrete (1:2:4) type B0 (using 12.5 mm graded stone aggregate) 25mm thick finished even and fair complete all as specified and directed. |
| 5 | M&L for 15 mm screed bed or bedding layer in cement mortar 1:4 mixed with WPC as per manufacturer's instructions over RCC Slab horizontal or vertical portion for laying water proofing treatment all as specified & directed. (Note : WPC/Liquid shall be measured and paid seperately). |
| 6 | M&L for APP modified roof treatment over existing RCC roof with following specification :- (a) Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning of surfaces. (b) APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torched application with minimum 10 cm side lap and 15cm end lap. The laying of membrane shall be done through an authorised applicator of manufacturer of APP membrane. (c) Over the membrane provide two coat of aluminium paint over a coat of aluminium red oxide primer complete all as specified and directed. |
| 7 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed . |
| 8 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa (AZ-150)as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 9 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of colour as approved having tensile strength of 550 Mpa(AZ-150) as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 10 | S& F 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 gm/sqm complete all as specified and directed |
| 11 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 12 | S&F E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet 0.3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x 0.45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2 m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion complete all as spd & directed . |
| 13 | Dismantling of timber scantling 40 sqcm and over in section in any position, unframed work complete all as specified and directed. |
| 14 | Dismantling of timber scantling in fillets rafters, purlins etc under 40 sqcm in section complete all as specified and directed. |
| 15 | M&L for second class hard wood as in scantling, fixed in unframed work wrought complete all as specified and directed |
| 16 | M&L for second class soft wood clean swan plain fillets, square, rectangular in section screwed with nails exc 13 & n exc 25 sqcm complete all as specified and directed |
| 17 | Demolition of Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed. |
| 18 | M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:6 complete all as specified and directed . |
| 19 | Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 20 | M&L for Rendering 15 mm thick in CM 1:4 finished even & smooth (without using extra lime or cement) complete all as specified and directed. |
| 21 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra cement) complete all as specified and directed. |
| 22 | Material & Labour for preparation of new plaster surfaces applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applying on wall complete all as specified and directed. |
| 23 | M&L preparing newly plastered surfaces ,and applying 2 coats of Oil Bound Distemper over a coat of alkali resistent primer over 1mm thick wall putty on walls complete all as specified and directed. |
| 24 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 25 | Dismantling water tanks and removing to store of capacity exc 500 and n.exc 1000 Litres complete all as specified and directed. |
| 26 | S&F 1000 ltr rotational moulded polyethylene water storage tank, triple layer construction, white in colour ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, complete all as specified and directed. |
| 27 | S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore dia of pipe complete all as specified and directed. |
| 28 | Taking up or down steel tubing and connections,15 mm bore including cleaning for refixing or removal to store complete all as specified and directed. |
| 29 | Taking up or down steel tubing and connections,20 mm bore including cleaning for refixing or removal to store complete all as specified and directed. |
| 30 | S&F 15mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc complete all as specified and directed. |
| 31 | S&F 20mm dia medium grade GI tubing with all fittings and fixtures complete fixed to walls, ceilings etc complete all as specified and directed. |
| 32 | S&F Gun-metal, globe or gate valves, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed etc all complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender