Tender For Provision Of Shed Along With Associated Works At Various Locations At 11 Brd Under Ge (Af) Ojhar
Tender Value
42 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Shed Along With Associated Works At Various Locations At 11 Brd Under Ge (Af) Ojhar
BOQ
| Sl. No. | Item Description |
| 1 | B&R : Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole , laying of UG cables etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in hard/ dense soil complete all as specified and directed. |
| 2 | M & L for PCC 1 :4 : 8 type D2 using 40 mm graded crushed stone aggregate as in foundation filling mass concrete complete all as specified and directed. |
| 3 | M&L for reinforced cement concrete M-25 (Design mix) using 20mm graded crushed stone aggregate in foundation , footings , foundation beams , plinth beams , base of columns etc complete all as directed. |
| 4 | All same as per item No 3 here-in-above but as in columns, pillars, piers, posts, struts and the like -do - |
| 5 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete |
| 6 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular or polygonal for rough finished flat surfaces of concrete |
| 7 | S&F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 8 | S&F 6 to 8 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia as in striupps , spacers & binders etc complete all as specified and directed. |
| 9 | S&F mild steel framed work using ERW or induction butt welded tubes conforming to I.S 1161-1979 Grade St-240 including necessary welding, bolting, special shaped washer, clamps, cleats etc. complete all as specified & as directed. |
| 10 | S&F rolled mild steel work as in Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment including necessary welding etc. conforming to Grade E-165 (Fe 290) all as specified and as directed. |
| 11 | Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and not exc 10cm long and dia of neck 5 to 10 mm complete all as specified. |
| 12 | S&F Aluminium composite panels for outdoor use (ACP) fixed to walls /claddindgs/ facades/ canopies in any sqm geomatrical pattern /shape columns projections, chajjs, elevations or in any other positions 3 mm thick aluminium composite panel of approved colour and brand (Arrowbond/viva/Alstone/Cross bond/Eurobond of sand series or equivalent as approved) including all materials such as MS hollow rectangular section 19 gauge and size 2.5 inches and fixing at 2 to 3 feet centre to centre for base framing including scaffolding for working upto 10mtr height. The ACP shall be fixed above the MS frame/battens to the masonry/RCC walls/Facias with necessary clamps, brackets and anchor fastners. The total cost includes cost of MS frame, ACP panels, clamps, wheather sealents using silicon, gasket, forms, fixtures, scaffolding, all type of tools and plants and any other consumables like fastenings, strips, nuts bolts, rivets, washers, sealent completed and all as specified and directed by Engr in charge |
| 13 | S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick with AZ value atleast 150 of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws as specified. |
| 14 | Supply and fix Pre- painted galvalume aluminum zinc coating GI plain sheet 0.50mm thick with AZ value atleast 150 of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction all as specified and as directed. |
| 15 | M&L for 2 mm thick polycarbonate sheet with both side including top & bottom aluminium to match with the profile of existing roof sheet and EPDM rubber gasket fixed with self tapping screws in roof/wall up to any height ,both side UV Proctected . complete all as specified and as directed by engg. in charge. Make : Duratuff/lexon Any extra accesseries rtequired for fixing of Polycarbonate between Galvalume sheets roofing deemed to be included rates.Note : (i) Contractor shall make own arrangment for climbing and working on hangars not exceeding 16 mtr ht.(ii) The Contractor shall be liable to execute the work in rainy season without any objection, if any leakage occurs . All safety measures are to be followed by the Contractor as per safety guidlines. |
| 16 | M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed. |
| 17 | Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed. |
| 18 | Removal of excavated soil/ material to a distance exc 1.5 meter but not exc 5 Km and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified |
| 19 | E&M Works : S&F Exhaust fan 300 mm sweep, 4 blade ( PVC ) with louvers, operated on 230/240V AC Single phase electric heavy duty, double ball bearing, 1400 RPM, plastic body , suitable for SP 230 / 240 volt, 50 Hz AC supply complete with louver shutter including fixing in exsiting position & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan finally making good the disturbued surface of walls both internal & external to its original specifications to the satisfaction of Enginner-in-charge complete all as directed. Make : Havels Turbo Force SP or equivalent oin Bajaj/ CG / Orient / Usha as approved |
| 20 | M& L for Point wiring with 1.5 Sqmm (nominal area) PVC ( FRLSH) insulated sheathed copper stranded conductor cable run in and including concealed in wall/floor PVC conduit not less than 20 mm as per IS with all fittings such as bends, tee,junction boxes,etc of suitable size including 1.5 Sqmm PVC(FRLS) insulated copper earth continuity conductor connected to common earth dolly and including MS/GI sunken boxes with modular inner & surface plate suitable for housing modular switches, sockets,fan regulators etc for one light/fan/call bell point controlled by one 1- way switch complete all as specified and as directed by Engr -in -Charge. |
| 21 | All same as per item No 20 here-in-above but One 3 pin socket point 5/6 Amp on same board with other switches.(to be provide new point as user reqairment) |
| 22 | All same as per item No 20 here-in-above but One 3 pin socket point 5/6 Amp on independent board |
| 23 | All as per item No. 20 here-in-above but with 2.5sqmm ( Nominal area ) cable with 2.5 Sqmm size copper earth continuity conductor for 3 pin 15/16 A socket outlet on independent board complete all as specified and directed. |
| 24 | Supply and fix Modular Socket outlet 6A/16 Amps 2/3 pin combined 2 module Make Anchor/Anchor Penta/Legrand/Anchor Roma ,Complete all as specified & as directed by Engineer-In-Charge. |
| 25 | Supply and fix Modular Socket outlet 6 Amps 2/3 pin combined 2 module Make Anchor/Anchor Penta/Legrand/Anchor Roma Complete all as specified & as directed by Engineer-In-Charge. |
| 26 | Supply and fix Modular switch one way 6 Amp,1 Module , Make Anchor/Anchor Penta/Legrand/Anchor Roma/Complete all as specified & as directed by Engineer-In-Charge. |
| 27 | Supply and fix Modular switch one way 16 Amp, 1 Module , Make Anchor/Anchor Penta/Legrand/Anchor Roma/Complete all as specified & as directed by Engineer-In-Charge. |
| 28 | Supply and fixcr Ceiling rose surface type, PVC/Polycarbonate isolated body size 50x28 mm three terminals. Make : AnchorHavells Rio.,Complete all as specified & as directed by Engineer-In-Charge. |
| 29 | S & Fix s and connecting up LED 20 watt fitting 6500K 4 feet with 120 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CCS-100-20-65-HL2-DP-NWH or equivalent in Philips/Havells/Wipro ). |
| 30 | S & Fix s and connecting up LED 40 watt fitting 6500K 2 feet with 120 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CDR-216-40-57-SL-NWH 20 4750 or equivalent in Philips/Havells/Wipro ). |
| 31 | M&L High brightness LED strip rope 144 D strip 3000K (Warm White) IP65 with uniformity of light required for perfect outdoor application ( 50 Mtr roll) complete with clamp, saddle or locking strip as required at site all as specified and as directed by Engr-in-Charge.Make Havells , equivalent in Cromptom and phillips Shakti |
| 32 | M&L High brightness LED strip rope 144 D strip 8000K (Blue Colour) IP65 with uniformity of light required for perfect outdoor application ( 50 Mtr roll) complete with clamp, saddle or locking strip as required at site all as specified and as directed by Engr-in-Charge.Make Havells ,Cromptom and phillips, Shakti |
| 33 | M&L High brightness LED strip rope 144 D strip (Green Light) IP65 with uniformity of light required for perfect outdoor application ( 50 Mtr roll) complete with clamp, saddle or locking strip as required at site all as specified and as directed by Engr-in-Charge.Make Havells, equivalent in Cromptom and phillips, Shakti |
| 34 | Supply, Installation, Testing and commissioning of 120 W LED Flood Light for Epoxy powder coated die-cast aluminium housing (ADC 12) with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 size gland is used for cable entry and provision for loopin-loopout, System wattage consist of 120 W with composite Wide Beam PC Lens cover to ensure better uniformity Powered by an Isolated integral IP 66 Potted electronic driver with 4 KV Surge Protection (SMPS based constant current supply) with lower THD, Output Short Circuit, Over Voltage, Surge Protection. CCT 5700 - 6500 K , CRI >70, THD < 10%, PF >.95, IP65, IK07 .Life class of 50,000 hrs @ L70, Operating Temperature :-10 TO + 45 DEG.C TEST REPORT TO BE SUBMITTED; Test Report LM 79 FOR Complete LED Luminaries and LM 80 for LED Chip as well as PHOTO BIOLOGICAL SAFETY for LD chip. LED fixture with BIS R mark and R Registration no. must for each Fixture. As per Crompton Cat Ref: CFS-504-120-57-60D-SL-GL-NSG (120 lm/w 10KV SPD ) with 5 Year warranty or equivalent in Havells/phillips/Bajaj. |
| 35 | S&F 300 mm 3 Blade Wall Fan operated on 230/240V AC,100 W Single phase electric supply ,5 star with motor speed of 2200 RPM complete including connecting with 3 core stranded copper conductor cable cordas as per manufacture recommendation from wall point to fan connector including writing MES No. on ceiling fan white synthetic enamelled paint complete all as per specified and directed by Engr-in- Charge . Make Havelles cat pt- ACCELERO or equivalent in Orient n & crompton |
| 36 | M&L submain wiring with 2 runs of 2.5 Sqmm single core PVC insulated, unsheathed, multi stranded copper conductor and one single core 2.5 Sqmm PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including non-metallic PVC rigid conduit of size 20/ 25 mm dia concealed in walls etc with all accessories such as Tees, Elbows, junction box, reducers etc and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note :- 2 runs 2.5 Sqmm cable , one run 2.5 Sqmm cable and one run of PVC shall be measured as one unit length) . |
| 37 | M&L submain wiring with 2 runs of 4 Sqmm single core PVC insulated, unsheathed, multi stranded copper conductor and one single core 4 Sqmm PVC insulated , unsheathed , multi stranded copper cable as earthing lead as per IS : 694 / 1990 drawn through and including non-metallic PVC rigid conduit of size 20/ 25 mm dia concealed in walls etc with all accessories such as Tees, Elbows, junction box, reducers etc and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. (Note :- 2 runs 4 Sqmm cable , one run 4 Sqmm cable and one run of PVC shall be measured as one unit length) . |
| 38 | Supply and fix in replacement Sheet metal enclosure for DB’s SPN, with 100 amps rated bus bar ,8 way ,240 volts double door. Make : Standard/HPL/Legrand.,Complete all as specified & as directed by Engineer-In-Charge. |
| 39 | Supply and fix MCB SPN 32 to 40 Amps 240 volts 10 KA. Cat Part No-408617 Make : Legrand /Standard/L & T,Complete all as specified & as directed by Engineer-In-Charge. |
| 40 | Supply and fix in replacement MCB SP 6 to 32 Amps 240 volts 10 KA C series. Cat part No-408595 Make : Legrand/ L & T./Standard ,Complete all as specified & as directed by Engineer-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender