Tender For Supply Installation Testing and Commissioning of 2000 Cfm Ahu With Associated Work In Room No- 703, Esb- 2 Building, Iit Kanpur.
Tender Value
4.26 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
9 days left
EMD
8531
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of 2000 Cfm Ahu With Associated Work In Room No- 703, Esb- 2 Building, Iit Kanpur.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and Commissioning of AHRI certified, double skin sheet metal construction, thermal break profile, with direct coupled EC fan and Ceiling suspended air handling units without mixing box, with supply air damper air (AL) damper, with injected PUF of density not less than 40Kg/CuM and .The air handling units shall be complete with 50mm thick synthetic type pre- filters with Aluminium wire mess, cooling coil (minimum thickness 0.5mm ) section with 6/8 RD seamless solid drawn copper tubes and aluminium fins construction, fan section shall be AMCA certified centrifugal type plug fan complete with direct driven package, limits switch, marine light & stainless steel drain pan ( minimum thickness 1.25 mm and 13 mm close nitrile insulation ) and vibration isolation spring/cushy-foot mount. AHUs shall be selected for a maximum face velocity of 500 FPM (2.5 MPS). Maximum outlet air velocity shall not exceed 2000 FPM (10.1 MPS). With speed controller of EC Fan as per specifications, with 2-way motorised valve and thermostat for temperature and speed control. |
| 2 | 2000 CFM, 35 mmwc static, with 50 mm thick PUF injected. Min 6TR cooling capacity, Ceiling suspended type. |
| 3 | CHILLED WATER PIPING |
| 4 | Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled/condenser water piping plumbing i/c fabrication of bends / elbows, tees, reducers etc) inside the building (with necessary clamps, wooden/puf support, vibration isolators, primer/ enamel paint, fittings but excluding valves, strainers, gauges etc.) as per specifications and as required complete in all respect.Note:- The Pipes of sizes 150mm & below shall be M.S. ‘C’ class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. |
| 5 | 25 mm |
| 6 | 32 mm |
| 7 | 40 mm |
| 8 | 50 mm |
| 9 | 65 mm |
| 10 | 80 mm |
| 11 | Supplying & fixing insulation on existing MS 'C' class pipe over exposed surface/underground of following sizes with 50 mm thick fire retardant thermocole ( polystyrene) molded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessian cloth, wire mesh, sand-cement plaster & enamel painting two or more coat to give even shade after applying one coat of ordinary paint etc complete as required. |
| 12 | 25 mm |
| 13 | 32 mm |
| 14 | 40 mm |
| 15 | 50 mm |
| 16 | 65 mm |
| 17 | 80 mm |
| 18 | Supplying, fixing, testing and commissioning of following BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & Oring PN 16 pressure rating size 200 mm to 400 mm gear type with removable wheel and below 200 mm with hand lever operated for chilled water/hot water circulation in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications as specified. |
| 19 | 40 mm |
| 20 | 50 mm |
| 21 | Supply and fixing industrial type thermometer of proportioning length with adjustable angle, direct reading including thermo well socket. Thermometer shall be suitable to read water temperature of range 0°C to 50°C completed as required. |
| 22 | Providing and fixing 0-150 PSIG industrial type pressure gauge in position of 65/100 mm dia with petcock valves (gun metal / brass) complete with pressure snubber, nipple etc complete as required. |
| 23 | Supplying, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports, bends, transitions, reducers, end caps, collars etc as required complete in all respect in confirmation with IS : 655 and approved drawings and specifications of following sheet thickness complete as required |
| 24 | Thickness 0.63 mm sheet |
| 25 | Thickness 0.80 mm sheet |
| 26 | Supplying, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc in confirmation to SMACNA/IS and as per specifications complete etc. as required. |
| 27 | Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete in confirmation to SMACNA/IS and as per specifications complete etc. as required. |
| 28 | Providing & fixing of thermal insulation with aluminium foil faced XLPE Class 'O' insulation sheet of following thickness on existing surface of pipe/duct with dentrite/adhesive etc.The joints shall be sealed with 50 mm wide and self adhesive PVC/Aluminum tape complete as required. |
| 29 | 19 mm |
| 30 | P & F of acoustic insulation with open cell Nitrile rubber sheet(Accosound) super silence of following thickness, on existing surface with adhesive i/c nut, bolt washer as req on duct.etc. complete as required. |
| 31 | 10 mm |
| 32 | Providing & fixing of SS ball valve of following size with compatible to proportioning Copper/MS pipe i/c all necessary accessories, support /hangers, including old dismantling if any complete as reqd. |
| 33 | 25 mm |
| 34 | 32 mm |
| 35 | Providing & fixing of three phase DOL starter Suitable for following size motor, 415 Volts, Auto manual selector switch, single phase preventer, wideband coil, ammeter, ON-OFF Push button etc. complete as required. |
| 36 | Upto 5 H.P |
| 37 | Providing, laying, testing, and commissioning of following size Un-armoured XLPE insulated Copper conductor power/control cable of following size on surface/recessed complete as required. |
| 38 | 3 Core x 1.5 Sq mm |
| 39 | 4 Core x 2.5 Sq mm |
| 40 | Supplying, Fixing, installation, testing and commissioning of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers in confirmation to SMACNA/IS and as per specifications complete etc. as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender