Tender For Repairs To Ladder Of The Existing Harbour Tower, Providing Gantry, Antenna Fixtures And Enclosure For Bts And Equipment Room At Fishing Harbour Site, Pondicherry (Modified)
Tender Value
2.16 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
9 days left
EMD
4330
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pondicherry → Puducherry
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Ladder Of The Existing Harbour Tower, Providing Gantry, Antenna Fixtures And Enclosure For Bts And Equipment Room At Fishing Harbour Site, Pondicherry (Modified)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 6 | 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 7 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : |
| 8 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 9 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 10 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 11 | 12 mm cement plaster of mix : |
| 12 | 1:6 (1 cement: 6 fine sand) |
| 13 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 14 | 1:6 (1 cement: 6 coarse sand) |
| 15 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 16 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 18 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 19 | Carrying out detailed and precise checking of all nuts and bolts,spring and plain washers provided at the joints/junctions of 1st working platform, ladder with safety cage, upto 1st platform and proper tightening of all the nuts with torque- wrenches of required size etc.complete including providing new hot galvanised nuts,bolts,spring washers and plain washers etc. of various sizes for fixing where found missing/required. (The payment for supplying hot dipped galvanised nuts,spring washers and plain washers, shall be made separately under relevant item.) |
| 20 | Dismantling tower parts like ladder, Safety Rings, Cable tray, handrail etc. making good the same by straightening the bend if any and refixing the same with GI bolts and nuts of required size all complete including all necessary tools, ropes etc. as directed by Engineer-in-charge.(The payment for supplying hot dipped galvanised nuts,spring washers and plain washers, shall be made separately under relevant item.) |
| 21 | Providing hot dipped galvanised nuts,bolts,spring washers and plain washers of required size and length for fixing the same at the joints/junctions of tower wherever found required during maintenance of tower.(The materials for nuts,bolts shall be of grade 4.6 and as per 6639-1972,IS :1364(Part I to V)-2002,IS:1367(Part VIII)-1992,plain washers as per IS:6610-1972 and spring washers of Type-B as per IS:3063-1994,IS:1148-1982,IS:2015-1977). |
| 22 | Supplying at site the M. S Galvanised tower materials with average mass of Zinc coating of 610 gms/sqm (ie approximately 85 microns) consisting of angles, flats, bars bolts and nuts washers etc. , Gusset plates, ladder parts, cable rack, antenna fixture, platform base plate, stiffening plates etc., including labour charges for cutting drilling holes, welding, etc.,as required as per the directions of Engineer-in-Charge. |
| 23 | Painting the ladder and cable gantry with Luxol or equivalent high gloss synthetic Enamel paint in two or more coats over and including a primary coat of Etch primer and base coat of primer (Zinc phosphate or Zinc Chromate or equivalent) of approved make and even shade ( The payment shall be made based on the weight of the sections painted in kgs) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender