Tender For Provision Of Deficient High Security Wall, Perimeter Road And External Security Lighting At installation Shivaji, Lonavla
Tender Value
28.29 Crore
Estimated cost
Bid Submission
14 Dec 2026
26 days left
EMD
15 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Deficient High Security Wall, Perimeter Road And External Security Lighting At installation Shivaji, Lonavla
BOQ
| Sl. No. | Item Description |
| 1 | Site clearance and development incl demolitionDemolition of cement concrete unreinfored in ground floor not exceeding 15cm thickness below or above ground level all as specified and directed. |
| 2 | Dismantling mild steel work of any description and in any position (including barbed wire& concertina coil of exsisting fence fence) complete all as directed by Engr-in-Charge. |
| 3 | Demolition of PCC block/ stone walling built in Cement Mortar complete all as directed by Engr-in-Charge. |
| 4 | Removal of demolished materials to distance exc 1.50 km and not exc 5.00km complete all as specified and as directed by Engr-in-Charge. |
| 5 | Demolition of Reinforced Concrete of any description and in any position not otherwise specifically provided for if cement concrete is reinforced (reinforcement cut as required to facilitate demolition), complete all as specified and as directed by Engr-in-Charge. |
| 6 | Dismantling chain link fencing wire mesh any type complete all as specified and as directed by Engr-in-Charge. |
| 7 | Site Clearance in Soft/loose soil. Including all material such as grasscomplete all as specified.Note : The work is started, the area coming under cutting and filling shall be cleared of shrubs, vegetation, grass, bush, weed, trees and saplings not exceeding 30 cm in girth, measured at a height of one metre above ground level. Useful material shall be stacked and rubbish/useless materials disposed off upto a distance 50 m outside the periphery of the area. Roots of trees and saplings shall be removed as described under felling of trees and the hollows filled up with earth, levelled and rammed complete all as directed by Engr-in-Charge. |
| 8 | Rough excavation not exceeding 1.50 m deep and getting out in soft / disintegrated rock, complete all as specified and as directed by Engr-in-Charge. |
| 9 | Rough excavation not exceeding 1.50 m deep and getting out in hard rock, complete all as specified. |
| 10 | Removing of excavated rock to a distance n.exc 50 m and depositing where directed and n.exc. 1.50 above the ground level from the starting point complete all as specified and as directed by Engr-in-Charge. |
| 11 | Removing of excavated rock to a distance beyond 50 m and upto a total distance of 250m and depositing where directed and n.exc. 1.50 above the ground level from the starting point complete all as specified and as directed by Engr-in-Charge. |
| 12 | Removing of excavated rock to a distance exc. 250m but n exc. 500m and depositing where directed and n.exc. 1.50 above the ground level from the starting point. |
| 13 | Removing excavated material (Rocks) exc. 1.50 km but n exc. 5 km and depositing where directed, complete all as specified. |
| 14 | RoadForming embankments soild material including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base where as directed, complete all as specified. |
| 15 | Rolling and consolidating formation surfaces in cutting/filling to camber by using earth compactor of capacity exc 8 tonne or compaction methodology reccomended by soil test agency to under OMC to achieve the min 98% density of MDD determined using modified compactor density determination method as per is code of exisiting soil complete all as specified and as directed. |
| 16 | Material & labour 150 mm thick Soiling (or sub base) with broken boulders or quarried stone, inter stices filled, surface laid in two layers each of 100mm thick, over rolled formation surfaces as per MORTH specifications, spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne vibratory roller complete all as specified and as directed.Note: Each layer shall be provided in seperate operation. |
| 17 | Laying and compacting 225 mm thick (compacted thickness) Wet Mix Macadam (WMM) laid in three layers of 75mm each layer grading as per table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1OO KN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge work 2013 |
| 18 | Providing and consolidating 75 mm thick premix Dense Bituminous Macadam (DBM Grading-11) using min 4.5 % VG 30 grade binder by weight of total mix aggregate gradation as per Grading 2 of Table 500-10 of MaRTH specification oad and bridge works 2013, rolled and compacted to required camber and gradient complete all as specified and directed by the Engineer-in-Charge. |
| 19 | Material and labour for red bajri filling in shoulders, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed by Engr-in-Charge. |
| 20 | M&L for applying evenly a priming / tack coat with bituminous primer @ 5 Kg per 10 Sqm complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 21 | M&L for applying evenly a priming / tack coat with bituminous primer @ 5 Kg per 10 Sqm complete all as specified and as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysDec 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender