Housing Urban and Rular Development Government Departments Closing in 1 days TDR #58496579

Tender For Construction Of Toilets In Vending Zone Area Ward No. 8 Under Municipal Corporation Una (H.P.)

Issued by Government Departments · Una, Himachal Pradesh
Tender Value
11.27 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
1 days left
EMD
22560
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Una → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Toilets In Vending Zone Area Ward No. 8 Under Municipal Corporation Una (H.P.)

BOQ

Name of Work:- Construction of Toilets in Vending Zone Area ward No. 8 under Municipal Corporation Una (H.P.)
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil.
2Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
3Form work Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns i/c all type complete.
4Providing Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :- 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
5Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level:-- Mild steel and Medium Tensile steel bars
6Ist class Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level up to floor V level in all shapes and sizes in : 1:6 (1:cement:6 sand)
7Ist class Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Super Structure up to floor V level in all shapes and sizes in : 1:6 (1:cement:6 sand)
8Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
9Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
1015 mm cement plaster in single coat on rough side of brick masonry for interior plastering upto floor two level i/c arrises, internal rounded angle, chamfers and or rounded angles not exceeding 80 mm in girth and finished even & smooth with cement mortor 1:6 ( 1 cement :6 sand ) in all leads and lifts.
11Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture
12Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size).
13Finishing walls with textured exterior paint of required shade in New work ( Two or more coat applied @ 3.28 ltrs./10Sqm.) over and including priming coat of exterior primer applied @2.20 kg/10Sqm. Complete
14Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for routing of joints to be made separately).Size of Tile 600x600 mm
15Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.
16Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand
17Wiring for light/Fan point/Exhaust fan point/call bell point with 1.5 Sq.mm PVC insulated copper conductor cable in surface
18Supplying and fixing metal box of 180 x 100 x 60mm deep (Nominal size) on surfacelifts.
19Supplying and fixing 40Amps to 63 Amps rating 240 Volts \\"L\\" series miniature circuit breaker (Category- A, 63 Amps.)
20Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 volts on surface. as required Bus bar 8 way.
21Supplying and fixing 20Watt LED Tube light
22Providing and fixing vitreous china water closet Sinle piece CERA MAKE including all acessories with fitting at site complete in all respect.
23Providing and fixing of PVC bend 100 mm dia complete in all respect.
24Providing and fixing of PVC bend 75 mm dia complete in all respect.
25Providing and fixing of PVC waste pipe and ventilating pipes complete in all respect. i) 100 mm dia
26Providing and fixing of CP brass bib cock with capstan head 15 mm dia complete in all respect.
27Providing and fixing of wall ceiling floor galvanized MS tube (Medium) tube fitting and clamps including all acessories & making good the wall ceiling and floor 15 mm thick complete i) 15 mm dia GMS pipe
28Providing and fixing of CP angle valve with capstan head 15 mm dia complete in all respect.
29Providing and fixing of SS grating 100 mm dia complete in all respect.
30Providing and fixing of GI Sockets 15 mm dia complete in all respect.
31Providing and fixing of GI Elbow 15 mm dia complete in all respect.
32Providing and fixing of GI Equl Tee 15 mm dia complete in all respect.
33Providing and fixing vitreous china Wash basin single hole with PVC connection pipe.
34Providing and fixing PVC Water Tank 500 ltrs cap. Vectus make i/c Fitting with accessories.
35Providing and fixing of CP Piller cock with capstan head 15 mm dia complete in all respect.
36Providing and fixing Exe. Nipple 15 mm long.
37Providing and fixing of PVC connection pipe complete .
38Providing and fixing of Mirror ISI marked complete .
39Providing and fixing of Towel Ring complete .
40Providing and fixing of Soap Dish tray complete .
41Providing and fixing of Towel Rod complete .
42Providing and fixing of PVC Floor Trap 75 mm complete .
43Providing and fixing of PVC pipe ISI Mark of 100 mm dia complete .
44Providing and fixing of MS Angle frame Chamber 60x60CM Complete .
45Providing and fixing of Ceiling Fan ISI Marked complete .
46Providing and fixing of Exaust fan ISI marked complete . Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58496579
AUTHORITY Government Departments
TENDER VALUE 11.27 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Urban Development Department
Work Description Tender for Construction Of Toilets In Vending Zone Area Ward No. 8 Under Municipal Corporation Una (H.P.)
Basic Detail
Tender No MCU/e-tender/2026/2951 dated 06.11.26
Bidding Type Tender
Location
City Una
State Himachal Pradesh
Key Dates
Publish Date 12 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 11.27 Lakhs
Tender Fee 350
EMD 22560
Exemption Not Available
Document List
289798e4-bc9f-48fc-96eb-947409d570b1.html
BOQ_220892.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

289798e4-bc9f-48fc-96eb-947409d570b1.html

xls

BOQ_220892.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender