Drinking Water Supply and Sanitation Government Departments Closing in 10 days TDR #58495907

Tender For Special Repairs To Kadanganeri Tank And Thulukkankulam Inlet In Kadanganeri Village Of Alangulam Taluk In Tenkasi District.

Issued by Government Departments · Tenkasi, Tamil Nadu
Tender Value
3.89 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
10 days left
EMD
3890
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Tenkasi → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Special Repairs To Kadanganeri Tank And Thulukkankulam Inlet In Kadanganeri Village Of Alangulam Taluk In Tenkasi District.

BOQ

Name of Work:- Special Repairs to Kadanganeri Tank and Thulukkankulam inlet in Kadanganeri Village of Alangulam Taluk in Tenkasi District.
Sl. No. Item Description
1Earth work excavation for foundation in all kinds of soils and sub soils except hard rock requiring blasting full depth as may be directed and depositing the surplus earth in places shown by the Engineer in - charge of work and leveling the same with all leads and lifts including shoring, strutting, shuttering, baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated etc. complete, complying with technical specifications and drawings as directed by the Engineer in - charge of work. (Specification No.4.2.2.)
2Providing and placing in position Plain Cement concrete of M-10 using broken hard granite coarse aggregate (well graded) of nominal maximum size of 40mm to IS specified grading and using crushed stone sand(m-sand) ( to achieve the specified characteristic strength of 10 N / mm² in 28 days ) and mixing the incredients in approved mixer including dewatering of the placement site by baling/pumping and diverting wherever necessary placing in layers and watering, curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying with standard specification and as directed by the departmental officers.
3Providing and placing in Position of Plain cement concrete of grade M15 using hard broken stone aggregate of maximum nominal size of 60% of 40mm and 40 % of 20mm IS specified grading and using crushed stone sand(m-sand) ( to achieve the specified characteristic strength of 15 N / mm² in 28 days ) and mixing the incredients in approved mixer including dewatering of the placement site by baling/pumping and diverting wherever necessary placing in layers and watering, curing, finishing the surface with all leads and lifts etc., complete in all respects so as to attain the profile and strength as specified in the approved drawings and specification etc., complete complying with standard specification and as directed by the departmental officers.
4Supplying and erecting water tight steel centering for sides and soffits including supports and strutting upto height of 3.29 m high for plain surface such as R.C.C.slabs, vertical slabs,side slabs of R.C.C. Works with all cross bracings using mild steel B.G.10 gauge sheets of size 90cm x 60cm stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak (country wood) joists of size 10cm x6.5cm spaced at about 90cm centre to centre and suported by casurina props of 10cm to 13cm dia sapaced at 75cm centre to centre complete complying with standard specification and as directed by the by the Engineer incharge of work (The retrieved materials should be taken back by the contractor ). The payment should be made after the concrete is laid.
5Without strutting
6With strutting
7Fabricating, Supplying and erection of Screw gearing steel shutters of size above upto 1.00 m width consist shutters of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 65x65x6mm mild steel Angle at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.
8Fabricating, supplying and fixing of Shutter Groove Angle made up of 65x65x6mm Mild Steel angle for required height including welding hold fast of size 25x25x6mm Mild steel angle 2 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty for 5 years etc., complete, etc.,
9Earth work deploying earth moving machinery having width of 3m -10m for desilting channel and forming bund on either side and depositing the earth on banks including junlge clearance etc complete GST 18% Please Enable Macros to View BoQ information
10Earth work deploying earth moving machinery having width of 3m -10m for desilting channel and forming bund on either side and depositing the earth on banks including junlge clearance etc complete GST 18% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58495907
AUTHORITY Government Departments
TENDER VALUE 3.89 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Water Resources Department
Work Description Tender for Special Repairs To Kadanganeri Tank And Thulukkankulam Inlet In Kadanganeri Village Of Alangulam Taluk In Tenkasi District.
Basic Detail
Tender No 07(20)/CBD/TSI/2026-2027
Bidding Type Tender
Location
City Tenkasi
State Tamil Nadu
Key Dates
Publish Date 12 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 3.89 Lakhs
Tender Fee Ref. Documents
EMD 3890
Exemption Not Available
Document List
38cb64bf-3c9a-4192-89cb-64dc914275ae.html
BOQ_870589.xls
TDTWENTY.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

38cb64bf-3c9a-4192-89cb-64dc914275ae.html

xls

BOQ_870589.xls

pdf

TDTWENTY.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender