Tender For Renovation And Alteration Of Toilet At Safety Bay At Af Stn Bkt
Tender Value
4.84 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
18 days left
EMD
10000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Alteration Of Toilet At Safety Bay At Af Stn Bkt
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and directed. |
| 2 | M&L for Brick work with old size fly ash bricks straight or curved on plan exc 6m nean radius and setting in cement mortar (1:6) complete all as specified and directed. |
| 3 | Taking down cement plaster on brick walls etc including racking out joints, hacking for keys in scrubbing down and washing with water etc complete all as specified and directed. |
| 4 | M&L for 15mm thick rendering on brick work in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | Taking down of existing PVC chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and refixing to other opening, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC (1:2:4) type B-1 and reparing to broken jambs/reveals with plaster incl. white washing or distempering with putty as per exiting surface complete all as specified and as directed.Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts, plastering of jambs/ reveals incl. white washing or distempering with putty and no separate items for these shall be paid. |
| 6 | S&F 100 mm size stainless steel butt hinges with galvanised MS hinge pin etc. |
| 7 | S&F 150mm long aluminium anodised handle cast type and fixed complete all as specified and directed. |
| 8 | S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed. |
| 9 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding/rendering complete all as specified and directed. |
| 11 | M&L for Non-skid coloured Ceramic tiles 300 mm x 300 mm x 6 to 7 mm thick (square/rectangular) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 12 | M&L for Glazed ceramic coloured tiles in vertical surfaces 600mm x 300mm x 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 13 | M&L for south black granite 18-20 mm thick (Jet Black/Telephonic black) work (table rubbed and polished) in urinal partition including round moulding edges as reqd etc. and embedded in existing brick wall etc complete all as specified and directed. |
| 14 | Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 15 | Taking up or down 20 mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed. |
| 16 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 20mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of complete all as specified and directed. |
| 17 | S&F 20 mm bore tubes medium grade galvanized with all fittings such as Tees, elbows, unions, sockets, short, lengths, plus etc. and fixed complete to walls and ceilings or laid in floors of any length including taking down or up old GI tubing complete all as specified and directed. |
| 18 | S&F in repair 15mm bore bib tap cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and directed. |
| 19 | S&F in repair 15mm bore pillar taps cast copper alloy chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as complete all as specified and directed. |
| 20 | S&F in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed. |
| 21 | S&F in repair 15mm bore 2 way angle valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union complete all as specified and directed. |
| 22 | S&F in repair health faucet (hand shower) (ABS body) with 1.2 mtr long flexible tube and wall hook etc complete all as specified and directed. |
| 23 | S&F in repair brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges complete all as specified and directed. |
| 24 | S&F in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified and directed. |
| 25 | S&F in repairs Brass Hat and coat hooks, solid body, 175mm to 250mm complete all as specified and directed. |
| 26 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 27 | S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete complete all as specified and directed. |
| 28 | S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar (1:6) complete all as specified and directed. |
| 29 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed. |
| 30 | S&F in repair rotational molded polyethylene water storage tanks (white colour, tripple layer) (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position after dismantling water tank of cap exc 250 ltr and not exc 500 ltr and removing to store and complete all as specified and directed. |
| 31 | S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as spd and directed. |
| 32 | S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipes complete all as specified and directed. |
| 33 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed. |
| 34 | S&F for 100mm bore sand cast iron pipe in any length including jointing with cement, in walls complete all as specified and directed. |
| 35 | S&F for 75mm bore sand cast iron pipe in any length including jointing with cement, in floor/trench complete all as specified and directed. |
| 36 | S&F cast iron bend 100mm bore complete all as specified and directed. |
| 37 | S&F cast iron bend 75mm bore complete all as specified and directed. |
| 38 | S&F branch pieces cast iron single (equal or unequal) 100mm bore complete all as specified and directed. |
| 39 | Supply & Fixed branch pieces cast iron single (equal or unequal) 75mm bore complete all as specified and directed. |
| 40 | M&L in repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 41 | S&F vitreous china wash basin white flat back size 550 x 400mm with pedestal excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners complete all as specified and directed. |
| 42 | S&F vitreous china Corner wash basin white flat back excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners complete all as specified and directed. |
| 43 | S&F only in repairs Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 44 | Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15mm thickness below or above ground level and removing material from site complete all as specified and directed. |
| 45 | M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregates in subbase, foundation, filling and mass concrete complete all as specified and directed. |
| 46 | M&L for applying 1 mm thick wall care white putty in two layers white wall care putty on walls complete all as specified and directed. |
| 47 | M&L for preparation and applying two coats of oil emulsion distemper over one coat of primer on new putty surfaces of walls complete all as specified and directed. |
| 48 | M&L for preparation and applying one coat of white wash on old surfaces of ceiling complete all as specified and directed. |
| 49 | Complete removal or existing treatment on wall/roof projections including fascia cornices etc by scrapping with mechanical sander (having mechanical vaccum machine, scruber) with sanding pad adjustable size according to high of building of appropriate grit to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed. Note: Contractor shall ensured that all deployed labour's on operations, like painting & misc building repairs & maintenance work, electricity subjected repairs & instrallation and its testing related have to maintained according to CA & related regulated other agency norms as followed, No extra demand will be occured on department on this account. |
| 50 | M&L for preparation of newly putty surfaces of walls and applying two or more coats of 100% premium acrylic emulsion in Comouflaging tri or other pattern having VOC less than 50gm/Ltr and UV resitance as per IS 15489-2004 alkali and fungal resistance, dirt resitance exterior paint of required shade (company depot tinted) with silicon additives @1.43 ltrs/ 10 Sqm over and including priming coat of exterior primer applied @0.9 ltr/10sqm over new by prepare surface and height upto 9 meter complete all as specified and directed. |
| 51 | M&L for Vitrified out door tiles size 300mm x 300mm or 400mm x 40mm x 10mm thick digital design set, jointed and pointed in neat cement slurry as in floors with grey cement over & including over screed bed or bedding layer of mortar 20 mm thick Cement Mortar (1:6) complete all as specified and directed. |
| 52 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors,etc.as directed. |
| 53 | M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade in non metallic rigid PVC concelled conduit medium grade 25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board complete for following-Make of Cable- Plaza/Finolex/Havells/Polycab or equivalentMake of PVC conduit :- AKG/ Plaza/ Jindal / Finolex One light/fan point controlled by one switch SP 5 Amps ,240 V |
| 54 | One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed |
| 55 | One 3 pin 5 amps socket point on same board complete all as specified and directed. |
| 56 | All as per the item no 2 herein before but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet. |
| 57 | S&F modular switches 1 way 6A,1 module. complete all as specified and as directed.Make - Goldmedal/cabtree(havells)/ABB. |
| 58 | S&F modular switches 1 way 16A,1 module,complete all as specified and as directed.Make - Goldmedal/cabtree(havells)/ABB. |
| 59 | S&F modular 6 A sockets-5 pin 2 module complete. complete all as specified and as directed.Make- Goldmedal/cabtree(havells)/ABB. |
| 60 | S&F modular 6A/16A sockets-3/5 pin combine 2 module.complete all as specified and as directed.Make - Goldmedal/cabtree(havells)/ABB. |
| 61 | Supply & fix modular fan regulator switch type for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator.Make - Goldmedal/cabtree(havells)/ABB. |
| 62 | S&F ceiling rose surface bakelite three terminal complete all as specified and directed. |
| 63 | S&F modular batten type holder with 09x1 watt bulb complete insulated body with back plate suitable for batten fittings complete all as specified and directed. |
| 64 | Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V , minimum 120 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements all as per specified and directed by Engr-in-charge.Make - Phillips/Havells/Bajaj. |
| 65 | Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6500/4000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. Make - Phillips/Havells/Bajaj. |
| 66 | M&L in repair for submain wiring with two run of single core PVC insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn through in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc including taking out old unserviceable burnt/damaged sub main wiring from its existing position complete all as directed by Engr-in-Charge (Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the unit rate).Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex |
| 67 | S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single pole one module MCB of 20 amp including electrical connection all as specified and directed by Engineer-in-Charge.Make- Havells/ABB/Goldmedal. |
| 68 | S&F sheet metal enclosure for DB’s when MCB to be used single pole and neutral double door, 8 way, AC,240 volt with 200 amp bus bar rating complete all as directedMake :- Havells / Legrand /Indoasian/ Seimens. |
| 69 | S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand /Indoasian/ Seimens. |
| 70 | S&F MCB DP 40 to 63 Amps 240 Volts, 50 Hz, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand /Indoasian/ Seimens. |
| 71 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 900 copper winding of sweep 250 mm including making hole and making good the disturbed surface and complete all as specified & directed by Engr-in-Charge . Make-Phillips, Havells,Bajaj. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender