Tender For special Repair To Internal Roads, Road Furnitre And Allied Works At Bhadoriya Complex Under Ge South Pathankot
Tender Value
38.50 Lakhs
Estimated cost
Bid Submission
05 Dec 2026
13 days left
EMD
77000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Internal Roads, Road Furnitre And Allied Works At Bhadoriya Complex Under Ge South Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Repairs to pot holes any depth n.exc 1 Sqm each including sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 10 kg per 10 Sq.m, and providing bituminous premix asphaltic semi dense concrete (design mix ) ,30 mm thick (cosolidated ) thickness with 5.5 % binder content by weight of total mix laid with mechanical paver rolled and compacted to reqired camber and gredient with 8 to 12 ton power roller cmplete all as specified and directed . |
| 2 | M&L for premixed bituminous macadam n exc 75 mm thick ( consolidated thickness ) using 4.0 % binder content by weight of total mix ,layed /rolled compacted to reqired gredient and camber all as specified and directed |
| 3 | M&L for preparation of BM surfaces and applying evenly a tack coat of 2.5 kg/10 Sqm using Bituminous primer over prepared BM surface all as specified and directed |
| 4 | M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud vegitation grass etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5 Kg / 10 Sqm and bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness using crushed graded stone aggregate mixed with binder content of paving bitumen VG-30 with 5.5% binder contents by weight of total mix by using self propelled mechanical paver, rolled and compacted to required camber and gradient with 8 to 10 Tonne capacity power roller including preparation of bitumen carpet in digital computarized weigh batch hot mix plant, complete all as specified. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 5.5% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer). |
| 5 | M&L for painting line, dashes, arrow, letters etc on road pavement of new/old black top surface road surface and applying one coat of retro reflective thermoplastic road marking paint 2 mm thick & width not exc 10 cm for longer durability with 8% glass beads using special applicator machine fitted with profile shoe heater driven by experianced operator on road surfaces on including preparation of new/old treated surfaces, cleaning surfaces of all dirt, scales, oils, grease & foreign materials etc complete all as specified and directed by Engineer in charge with heating arrangement upto 160 degree celcius. Paint material shall be conforming to ministry of surface transport (MOST) specification 803.4 Vol -I as laid down in specification of road / bridge work \\" third revision\\" |
| 6 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed. |
| 7 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed complete all as specified and as directed |
| 8 | Dismantling of stone slab / tiles of any description or thickness laid, bedded and pointed in cement mortar in floors, hard standing, aprons etc complete all as specified and directed. |
| 9 | M & L 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 10 | M&L for machine pressed precast concrete interlocking glossy finish paver block any shape and size of 80 mm thickness, M-35 grade chemically coloured laid over 25 mm thick sand cushioning including necessary formwork at edges with filling of concrete 1:2:4 type B0 complete all as specified and directed. Note : Rate includes for cutting of paver blocks for curved portion and sand coushioning also. |
| 11 | M&L for precast coloured, chequered cement concrete tiles, of size 305 x 305mm x 25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) including necessary filleting in cement concrete 1:2:4 type B0 using 12.5 mm aggregate complete all as specified. Note : Rate includes for cutting of tiles for curved portion also. |
| 12 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed |
| 13 | Preparation of new surfaces of stone, concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of PU enamel paint over a primer coat all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysDec 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender