Tender For Provn Of View Cutter At Harni Camp Area At Afs Vadodra
Tender Value
44.19 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
88380
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vadodara → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of View Cutter At Harni Camp Area At Afs Vadodra
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Hard / dense soil complete. |
| 2 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard / dense soil, complete all as specified and directed. |
| 3 | Removing excavated soil to a distance exc 250 metre but not exc 50 metre and depositing where directed at level n exc 1.5 m above the starting point. |
| 4 | M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 5 | M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as directed. |
| 6 | M&L for providing plain cement concrete 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete all as directed. |
| 7 | M&L for mild steel work in posts and struts (verticle / horogental position at any height), including cutting tops to shape as directed, welding, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work using mild steel section conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 8 | S&F mild steel plates ( plain or chequered ) chaneis, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to FE 290 (Gde-E-165) complete all as specified & directed |
| 9 | M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, Diameter of neck in mm exc 16 mm and n exc 20 mm complete all as specified |
| 10 | M&L for preparation of new steel / iron surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed by Engineer-in-Charge. |
| 11 | S&F 0.50 mm thick (total coated thickness) Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self drilling / tapping screws as specified and as directed by Engineer-in-charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender