Agriculture Boards / Undertakings / PSU Closing in 2 days TDR #58495783

Tender For Repair And Maintenance Of Electrical Installation Including Providing And Fixing Of Three Phase Industrial Type Sockets At Fci Fsd Charrah Under D.O., Purulia.

Issued by Boards / Undertakings / PSU · Purulia, West Bengal
Tender Value
4.20 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
2 days left
EMD
8420
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Purulia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repair And Maintenance Of Electrical Installation Including Providing And Fixing Of Three Phase Industrial Type Sockets At Fci Fsd Charrah Under D.O., Purulia.

BOQ

Name of Work:- Repair and maintenance of electrical installation including providing and fixing of three phase industrial type sockets at FCI FSD Charrah under D.O., Purulia.
Sl. No. Item Description
1Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm
2Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required.
36x2.5 sq.mm
4Supply of following type of XLPE POWER CABLE of 1.1 kv grade armoured Al. cable compulsory ISI mark confirming to IS:7098/ PART –I / 88 with amendment no.1 as required.
5Cable size- 4x10 sq. mm
6Cable size- 4x6 sq. mm
7Cable size- 2x6 sq. mm
8Laying and fixing of one No. PVC insulated & PVC sheathed/XLPE al conductor cable of 1.1KV grade of following size on the wall surface as reqd.
9Upto 35 sq. mm (clamped with 1mm thick saddle)
10Laying of one no PVC insulated and PVC sheated power cable with the help of 7/18 GI stay wire & both side turn buckle with suitable size clamp fixing of pole/Godown wall/truss etc. as required for cable size of upto following size Upto 35 sq. mm
11Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.180mmX100mmX60mm deep
12Providing and fixing 4 way connector in terminal MS box/loop box along with interconnection and earth connection as required.
13Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
14For 4x10 sq. mm (25 mm)
15For 4x6 sq. mm (22 mm)
16Cable Size- 2X6 sq.mm (19 mm)
17Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top along with 30 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
18Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ sub main wiring/ cable as required.
19LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt). Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beamangle 30 deg-120deg as per the application and theproject requirement, suitable tilt able fitting, life time(LED, Driver & electrical circuitry) of minimum 50000Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K / 5700°K /6500°K (As per ANSI Bin),SDCM(Standard Deviation Colour Matching) <5,Maximum power consumption should not morethan the specified rating and Fixture shall be ofrelevant BIS standard complete in all respect i/cexternal connections with 1.5 sq.mm FRLS/HFFR,PVC insulated copper conductor single core cableand earthing etc. as required with Minimum 5 yearOEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 watt
20S/F of W.P. loop in /out box on pole of size (155x155x100 mm) including fixing with M.S. clamp 40X3 mm thick on pole/SF along with 1 no. SP MCB (5-32 amp) and one nos. nutral link and wiring/interconnections with 1.50 sq. mm pvc insulated copper conductor single core cable from box to individual fitting
21Providing and fixing 2mtr long 50 mm X 50 mm X 6 mm angle iron on wall/pole including painting the angle and flat iron with primer and finish paint etc. for installation of street light fitting as required.
22Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
23Triple pole and neutral Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58495783
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE 4.20 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Food Corporation Of India
Work Description Tender for Repair And Maintenance Of Electrical Installation Including Providing And Fixing Of Three Phase Industrial Type Sockets At Fci Fsd Charrah Under D.O., Purulia.
Basic Detail
Tender No EE/WB/03/2026-27
Bidding Type Tender
Location
City Purulia
State West Bengal
Key Dates
Publish Date 12 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 4.20 Lakhs
Tender Fee Ref. Documents
EMD 8420
Exemption Not Available
Document List
bf17f7e4-c57a-4ae0-a05d-3f9735df91f0.html
BOQ_981560.xls
DNITCharrah.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

bf17f7e4-c57a-4ae0-a05d-3f9735df91f0.html

xls

BOQ_981560.xls

pdf

DNITCharrah.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender