Tender For Dismantling & Replacement Of Toilet Floor, Toilet Seats, And Sanitary Fitting Etc. Complete In One Toilet Of Eb-Iv/22 And Providing Oil Bound Distempering, Painting And Tile Work In Eb-Iv/20 And Providing Wooden And Painting Work In Eb-Iii
Tender Overview
Project Description
Tender for Dismantling & Replacement Of Toilet Floor, Toilet Seats, And Sanitary Fitting Etc. Complete In One Toilet Of Eb-Iv/22 And Providing Oil Bound Distempering, Painting And Tile Work In Eb-Iv/20 And Providing Wooden And Painting Work In Eb-Iii/04 Hpsebl Colony At Sundar Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below |
| 2 | Providing Wood work in frame of door, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) Sal Wood |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling. |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick |
| 5 | Demolishing cement concrete manually/by mechanical means and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge. |
| 6 | Dismantling tile work in floor and roofs laid in cement mortar including stacking material within 50 meters lead:- For thickness of tiles 10 mm to 25mm |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 8 | Repair to plaster of thickness12 to20mm in patches of 2.50 sqm and under including cutting the patch in proper shap, raking out joints and repairing and plastering the surface of the walls including disposal of rubbish to the dumping ground all complete as per direction of EIC Cement mortar 1:4 (1cement:4 sand) |
| 9 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour confirming to Is:4457 laid in acid and or alkali resistant mortar bedding , including cutting, fitting and grouting of 3mm wide joints wih epoxy grout comprising of 0.70 kg organic resin per kg including filling finishing and all incidental works complete as per the directions of the Engineer-in-Charge. In flooring on a abed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand):- acid and alkali resistant tile. |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 12 | Painting wood work with Deluxe Multi Surface Paint of required shade . Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 13 | Providing and fixing white vitreous china pedestal type water closet (Europeantype) with seat and lid, 10 litre low level white vitreous china flushing cistern &C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflowarrangement, including painting of fittings and brackets, cutting and making good the walls and floors wherever required on exisitng P/S trap. W.C. pan with ISI marked white solid seat and lid (Cera, Hindware, Jagquar, Kholer or equivalent) |
| 14 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore class Heavy C class with 3.2 mm thickness. (Jindal, Tata or equivalent) |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps. 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Cera, Hindware, Jagquar, Kholer or equivalent) |
| 16 | Providing and fixing white vitreous china pedestal for wash basin, complete recessed at the back for the reception of pipes and fittings (Cera, Hindware, Jagquar, Kholer or equivalent) |
| 17 | Providing and fixing 600 × 450 mm bevelled edge mirror of superior glass (of approved quality), complete with 6 mm thick hardboard ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 18 | Providing and fixing unplasticised PVC connection pipe with brass union: 45 cm long, 15 mm nominal bore. |
| 19 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931, 15 mm nominal bore (Cera, Hindware, Jagquar, Kholer or equivalent) |
| 20 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15 mm nominal bore (Cera, Hindware, Jagquar, Kholer or equivalent) |
| 21 | Providing and fixing 8 mm dia C.P./S.S. jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-Charge (Cera, Hindware or equivalent) |
| 22 | Providing and fixing C.P. brass towel rail (Cera/Hindware/Jal or equivalent brand) complete with C.P. brass brackets fixed to wooden Cleats with C.P. brass screws. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 888 mm, weighing not less than 170 gms. |
| 23 | Providing and fixing PTMT grating of approved quality and colour, circular type, 100 mm nominal dia. |
| 24 | Providing and fixing 600 × 120 × 5 mm glass shelves with edges round off, supported on anodized aluminium angle frame with C.P. brass brackets and guard rail, complete fixed with 40 mm long screws, rawl plugs etc. complete. |
| 25 | Providing and fixing 32 mm dia. PVC waste pipe flexible (coil type), length not less than 800 mm. |
| 26 | Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 27 | Providing and fixing P.V.C. low-level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 28 | Providing and fixing chromium plated brass curtain rod 25mm dia having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete: Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender