Tender For Development Of Village Panchayat Playground At Varkhand In Pernem - Goa.
Tender Value
3.02 Crore
Estimated cost
Bid Submission
26 Nov 2026
11 days left
EMD
6.04 Lakhs
Bank guarantee accepted
Document Fee
25000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of Village Panchayat Playground At Varkhand In Pernem - Goa.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 2 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : a. All kind of soil |
| 3 | Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in: a. Ordinary Soil |
| 4 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 5 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing :a. All works upto plinth level |
| 6 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. |
| 7 | Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in superstructure |
| 8 | Centering & shuttering including Strutting, Propping & removal of forms for : i. Foundations, Footings, Bases for columns |
| 9 | Columns, Piers, Pillars, Aburments, Posts and struts (square rectangle polygon in plan) |
| 10 | Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth |
| 11 | Suspended floors, roofs landings, shelves & their supports |
| 12 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) . a. All works upto plinth level |
| 13 | In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level |
| 14 | In beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases upto floor five level |
| 15 | Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.)(Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surrounding concrete in the structural member . |
| 16 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 17 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. |
| 18 | Half brick masonry in cement mortar 1:3 (1 cement : 3 coarse sand) with bricks of class designation 75 kg /cm2. (b)Upto floor V level. |
| 19 | 12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 20 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 21 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 22 | Finishing fine with neeru over plaster |
| 23 | Neat Cement punning |
| 24 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 25 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 26 | Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete. |
| 27 | Painting one or more coats of acryllic exterior paint of approved brand and manufacture(Such as Dulex/ Asian Paints/ Sherwin Willians) on old work including cleaning the surface with water etc. complete. |
| 28 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 29 | Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade. |
| 30 | Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 31 | Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) a) 20 mm thick. |
| 32 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 33 | Providing and fixing coloured ceramic tiles spartek or equivalent of 12 \\" x 12\\" (399x150 mm cut size) 6 mm thick in skirting and dados on 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete. |
| 34 | Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete. |
| 35 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with two sliding shutters using 18 mm series shutters section. (b) Plain glass |
| 36 | Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Openable windows and ventilators using 18 mm series shutters section. (b) Plain glass |
| 37 | Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by by screws. (a) Plain grill |
| 38 | Providing FRP door shutters 35mm thick with frame size in clear opening of 0.75x2.10m hinges and screws complete., |
| 39 | Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories : i. S.S. Hinges 4\\" 3 Nos. ii. S.S. Latch 1 Nos. iii. Tower Bolt 5\\" 2 Nos. iv. Handle 5\\" 2 Nos. Shutter Thickness a. 30mm |
| 40 | Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring. |
| 41 | Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. (b) Second class Indian teak wood |
| 42 | Providing flat iron hold fast 40 cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 stone aggregate 20 mm nominal size. (b) 40 x 3 mm flat iron hold fast, 15 cm long |
| 43 | Providing & fixing flush door shutters of solid core construction with plywood panel fixed on either side of the shutters alongwith polymer sheet overlaid on the exterior surface (wooden or equivalent ) as per manufacturers specifications with second class Indian teak wood lipping (not less than 6 mm thick) all round 30 mm thick shutter with bright finished brass hinges 100 x 70 x 4 mm with brass screws. |
| 44 | Providing and fixing chromium plated brass handle with necessary screws etc. complete (a) 125 mm |
| 45 | Providing & fixing chromium plated brass tower bolts (barrel type) with necessary screws complete. (b) 200x10 mm |
| 46 | Providing and fixing bright finished brass door latch with necessary screws etc complete (b)250 x 16 x 5 mm |
| 47 | Providing and fixing anodised aluminium flat latch (b) 200 mm |
| 48 | Providing and fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws and fittings complete. |
| 49 | Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete. |
| 50 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for wood work of approved brand & manufacture in all shades on new work to give an even shade. |
| 51 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 52 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 53 | Supplying and fixing of Precast RCC slabs(factory made,the factory should be ISO certified and registered under Directorate of Industries, Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate, consolidated by means of mechanical platform, vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement, Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. b. Size 900 x 400 x 100 mm with steel reinforcement not less than 5.0 kgs per unit -12 T capacity |
| 54 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 55 | Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per th |
| 56 | Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete. (a) 140 mm nominal size |
| 57 | Providing and fixing on wall face C.I.. rain water pipes including filling the joints, with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cement: 2 fine sand) (b) 150mm dia pipe |
| 58 | Providing and fixing to wall face C.I. acessories for rainwater pipes including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 ( 1 cement : 2 coarse sand) (b) C.I. plain shoe 150mm dia |
| 59 | Supplying and filling good earth (comprising of black garden earth and sand) including screening through sieve of 7.5mm and spreding breaking of clods watering ramming compacting and rolling with 10 tones roller to give an leveling surface including transportation loading unloading royalty charges and disposal of surplus rubbish material beyound 1km as directed by the Engineer -in -charge. |
| 60 | Supply and installation of pair of volleyball pole socket (socket type) 3\\" x 4\\" round pipe, height adjustable with ratchet and net including transportation as directed by Engineer-in-charge. |
| 61 | Boring supply, installation and commissioning of Bore Well to accommodate 150 mm 'B' class casing pipe upto 100m depth including survey of availability of water, drilling of bore well with rotary/DTH typ drilling of 300m dia bore gravel packing, cleaning, development with mwchanical air compressor for removing bloackage and solid particles/minerals, providing, installation of 3HP submersible pump with control panel board with approved make of switch gears and necessary fitting complete and as per direction and instruction to use additional fitting (inclusion of cost of material, labour etc) by Engineer-in-charge. |
| 62 | Stylish design, made from 40x40 mm steel square tube with 60kg of ballast weight roller wheels are provided to facilitate easy transport and storage. This is designed for strength and stability to support heavy net with a large base maintain the stability. |
| 63 | Providing and fixing R.C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreate granitic or basaltic stone aggregate 12.5 mm nominal size) benches including finishing and plastering the exposed surface with cement mortar 1: 3 (1 cement : 3 fine sand) thickness not exceeding 6mm on exposed surface to give smooth and even surface except on the seat & the back of the bench which shall be of marble mosaic chips finished, rubbed and polished to granolithic finish top layer 6mm thick with white black coloured marble chips of sizes from smallest to 4mm nominal size laid in cement marble powder mix 3: 1 (3 white cement : 1marble powder) by weight in proportion of 4 cement marble powder mix : 7 marble chips by volume with under layer 12mm thick cement plaster 1: 3 (1 cement: 3 coarse sand) incl. finishing the rear and bottom sides with waterproofing cement pant of approved brand and required shade (3 or more coats) to give an even shade complete |
| 64 | Providing & fixing of facility information sign board of size 600mmx800mm rectangle made out of retro reflective sheeting conforming to Type XI standards of ASTM D4956-09 & as per IRC-67: 2012 specifications, fully covered over 4mm thick ACP/2mm thick Al supported with back support frame of 35x35x5 mm mild steel angle. Board Shall be fixed to a vertical post of 75x75x6mm mild steel angle of 3.6 mtr height and firmly fixed to the ground by means of properly designed foundation with M20 grade cement concrete 45 cm X 45 cm X 60 cm etc, 60 cm below ground level. 10 years warranty & a certified copy of three years outdoor exposure report from an independent lab as per IRC 67-2012 for Type XI retro reflective sheeting shall be submitted by the contractor. |
| 65 | Making lawns Using Mexican Ready Lawn , 1 x 2 feet size panels each including finishing the base, breaking of clods, removal of rubbish, dressing , planting lawn at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm |
| 66 | Planting of Trees and their Maintenance for one Year (Planting of trees by the road side (Avenue trees) in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year) |
| 67 | Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. (a) W.C. pan with white plastic seat and lid. |
| 68 | Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required. (a) Long pan pattern W. C. Pan |
| 69 | Providing 20mm thick marble slab to urinal partitions with cement complete |
| 70 | Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete (a) Jet black |
| 71 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. (d) Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps. |
| 72 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 73 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws (b) 600 x 20 mm size |
| 74 | Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw |
| 75 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe). a. 15mm outer dia CPVC pipe |
| 76 | 20mm outer dia CPVC pipe |
| 77 | 25mm outer dia CPVC pipe |
| 78 | 40mm outer dia CPVC pipe |
| 79 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:a. 110mm dia |
| 80 | 75 mm dia |
| 81 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : a. 110mm dia |
| 82 | 75 mm dia |
| 83 | Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design. |
| 84 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement: 2 coarse sand ;4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement ;2 coarse sand :4 graded stone agrregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cemetn and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg). |
| 85 | Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design : (a) 100 x 100 mm size P type |
| 86 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. ( c) 1000 lit. capacity |
| 87 | Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: a) 100 mm diameter |
| 88 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : 15mm nominal bore |
| 89 | 40mm nominal bore |
| 90 | Providing and fixing ball valve (brass) of approved quality : (a3) 25mm nominal bore |
| 91 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :110 mm dia |
| 92 | 75 mm dia |
| 93 | Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore |
| 94 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore |
| 95 | Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993 15mm nominal bore |
| 96 | Providing and fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993 20mm nominal bore |
| 97 | Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993 |
| 98 | Providing & fixing sand cast iorn spun soil, waste and vent pipes. (b) 75 mm dia |
| 99 | Providing and fixing R.P.V.C. vent cowl:a. 110mm dia |
| 100 | b) 75mm dia |
| 101 | Painting (two or more coats) on rain water, soil, waste & vent pipes and fittings with black anti- corrosive bitumanstic paint of approved brand and manufacture over a priming coat of ready mixed genuine red lead on new work: b) 75mm diameter pipes |
| 102 | Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :a. 110 mm dia |
| 103 | 75mm dia |
| 104 | Supplying 2HP, 3 phase pump including all accessories complete. |
| 105 | Providing and fixing Nylon Net fencing of size 3.00 x 1.50m consisting of 5Omm dia and 25 nmm dia Gl Pipe medium class and 4\\" white colour Nylon Net as per drawing lincluding providing and fixing holdfast embedded in cement concrete 1:2:4 primary coat with ready mixed lead paint and painting two or more coats with superior quality ready mixed paint of approved brand and manufacture in all shades on GI Pipe and as per direction of Engineer - in - incharge. |
| 106 | providing & fixing welded rectangular fencing of size 2.50x1.50 m consisting of 50mm dia and 40mm dia G.I. pipe of B' medium class respectively welded in between with 6mm dia. HYSD round steel bar at 0.15m C/C as per drawing including providing & fixing with holdfast embeded 40cm G.I. pipe in depth in cement concrete 1:2:4 including premier coat with ready mix lead paint and painting two or more coat with superior quality ready mix paint of approved brand and manufacture in all shades as per directions of Engineer in charge to complete the work. |
| 107 | Fabricating & fixing in position circular Swing consisting of G.I. pipe of 2\\" dia \\"B\\" class & wooden rest. The assembly should have min height of 2.5 meters width 3 meter & should embedded in concrete (1:2:4) of size 40cm width & 60 cm depth with necessary fitting comnplete as shown in drawing & as per directions & instruction of Engineer - in Charge. |
| 108 | Fabricating & fixing in position Flat FRP Slide consisting of G.I. pipe of 1\\" dia \\"B\\"class angle 1.5 inch & base (slide) made upof M S.Plate. The assembly should have min height of 2.0 meters & should embedded in concrete (1:2:4) of size 40cm width & 60 cm depth with necessary fitting complete as shown in drawing & as per directions & instruction of Engineer - in Charge. |
| 109 | Fabricating & fixing in position Double seated Swing consisting of G.I. pipe of 2\\" dia \\"B'\\" class of wooden seat & chain arrengment. The assembly should have min height of 2 meters width 3 meter & should embedded in concrete (1:2:4) of size 40cm width & 60 cm depth with necessary fitting complete as shown in drawing & as per directions & instruction of Engineer - in Charge. |
| 110 | Fabricating in position See Saw consisting of G.I. pipe of 2\\" & 1.5 dia \\"B\\" ciass . Thel assembly should have min height of 2meters & should embedded in concrete (1:2:4) of size 40cm width & 60 cm depth with necessary fitting conplete as shown in drawing & as per directions & instruction of Engineer - in Charge. |
| 111 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with piano type marking switch ,3mm thick phenolic laminated sheet suitable size PVC/ MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. a. Group (A) |
| 112 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 113 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit ) |
| 114 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. (a) 5/6 A switch Cat A |
| 115 | Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. (d) 3 pin 5/6 A socket outlet Cat A |
| 116 | Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (a) Cat A |
| 117 | Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 1 no 6 pin 15/16 A modular socket outlet and 1 nos 15/ 16 A modular switch connection painting etc. as required. ( For workstations). (a) Cat A |
| 118 | Supplying and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch on board the modular surface/recessed PVC/GI modular box by suitably increasing its modular capacity, modular plate and cover including connection painting etc. as required. (a) Cat A |
| 119 | Supplying and fixing B series SP MCB, 240 V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\". (a) 5 A to 32 A, Cat A |
| 120 | Supplying and fixing B series SP MCB, 240 V, suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required\\". (b) 40 A, Cat A |
| 121 | Supplying and fixing following rating four pole 415 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required. (a) 40 A, Cat A |
| 122 | Supplying and fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator)interconnection between incomer MCB and busbars of following ways (but without MCBs as required). '(a) 6way (8+18), double door, Vertical type, Cat A |
| 123 | Supply and providing Chemical earthing system (Pipe in pipe type) with Outer pipe of the electrode having minimum 50mm diameter as per the enclosed specifiations and drawing.The outer and the inner hot dip galvanised MS pipes shall conform to the specifications and the space inbetween shall be filled with highly crystalline conductive and anti- corrosive mixture conforming to IS-3043. The earth electrode shall be CPRI tested. The scope of work includes boring( 300mm dia mimnimum)/exvavation of soil/hard rock, refilling with required quantity of back fill compound/Ground resistance enhancement powder of requisite quantity, compaction, constuction of masonary chamber etc complete as required to obtain the desired value. Aluminium tag with embossed earthing value shall be permanently attached to the pipe electrode. (a) 3 metres length electrode |
| 124 | Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required |
| 125 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. '(6) 4 Core 35 sq.mm |
| 126 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 127 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (7) 4 x 35 Sq. mm. |
| 128 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 4 x 16 Sq. mm. |
| 129 | Supplying and erecting switch disconnector fuse (SDF) 4 pole, 415V, 100A, withenclosure, AC23 A rated with terminal shrouds on both sides and phase barriers alongwith telescopic shaft for depth adjustments and door interlock and padlock complying toIS/IEC 60947-3 Part-1/3 HRC - DIN type fuse switch, insulation voltage 1000V forenclosing in panel with rotary handle for ON/OFF operation (without HRC fuse) as perspecificationno. SW-SWR/SDF. |
| 130 | Supplying and erecting anodized aluminium light LED fitting (4 feet) Max.22W with high transitivity diffuser with system lumens output of Min.2200lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angleof 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V,surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver withend caps on provided PVC Block/wooded board with minimum 2 years warrantyas per specification No. FG-IDF/LED. |
| 131 | Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (a) Cat A |
| 132 | Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories. (a) Cat A |
| 133 | Supply and erecting meter box suitable for three phase energy meter and incoming MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deapartment. |
| 134 | Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (c) 50 to 100 A |
| 135 | Supplying and erecting integrated LED street light fitting 160-170W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD0.95, operating range of 140 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs at L70B50 including driver complete with minimum 2 Years warranty as per specification No. FG-ODF/SL. |
| 136 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm |
| 137 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 6 sq.mm |
| 138 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed lenghtwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata |
| 139 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing masonry open duct, etc. complete as required |
| 140 | Supplying installation testing and commissioning of surface/ recess mounting vertical type 415 V TPN, double door MCB DB of sheet steel dust protected duly phosphatised and powder painted inclusive of 200 A tinned copper busbar common neutral link earth bar din bar for mounting MCBs detachable gland knock out plate and with 100 A 10 KA MCCB as incomer interconnection between incomer MCCB and busbars of following ways (but without MCCB/MCBs as required). (b) 8 way with 100A MCCB as Incomer, double door, Cat A |
| 141 | Supplying and fixing following rating and breaking capacity fixed type/adjustible 3 pole MCCB inside the existing cubicle panel board including drilling holes in cubicle panel making connections etc as required. '(b) 100 A 16 KA, CAT B |
| 142 | Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (d) TP, Cat A |
| 143 | Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (e) TPN, Cat A |
| 144 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm |
| 145 | Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B22/E-27 base as per specification no. FG-LP. |
| 146 | Supplying, erecting, testing and commissioning of minimum three & above star rated centrifugal water pump (monoblock), 230 V, single phase, 50 Hz, A.C. supply of 1.125 kW/1.5HP with discharge 198/50 lpm for head of 15/37.5 m & 40 mm suction/32 mm delivery pipe on provided CC foundation as perspecification no. WP-CGP. |
| 147 | Supplying and erecting 25 m (clear height) motorized high-mast (Top-200mm, Bottom- 560 mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN-10025 S 355/E350 & 3+4+5 mm thickness, with base plate 25 mm thick x OD 730 mm grade as per IS-2062, pole made in signal section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel- 316 grade 2 nos., 7x19 construction 6 mm, SG-DG U clamps, double drum winch assembly 600 kg, 5x2.5 sq.mm flexible copper cable with lantern carriage assembly suitable for max. 16 nos. luminaries and its control gear box, lightning arrestor, arrangement for fixing aviation light, night glow reflector on pole at suitable height, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with double check nuts & necessary accessories complete. specification no. OHPL/HM |
| 148 | MakingM-20 cement concrete foundation suitable by considering the safe soil bearing capacity at site as 10T/sq.mat 2m depth including excavation and fixingprovided nut bolts with the help of template , duly plastered as per design complete (for 25m high mast). |
| 149 | Providing and fixing 25 mm x 5 mm GI strip on surface or in recess for conections etc. as required |
| 150 | Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm |
| 151 | S.I.T.C. of cubicle floor mounted indoor panel, suitable to work on 440 v, 3 phase 4 wires and 50 Hz system. The panel should be free standing, dust and vermin proof, front compartmentalized, fabricated in 16 gauge CRCA sheet. The panel shall be powder coated with RAL 7032 colour after surface treatment with seven tank process. The cable entries shall be from bottom. Bus bar copper with colour coded heat shrinking insulating sleeves, interconnecting wiring etc. complete. The panel should be mounted suitably as required by engineer in charge along with termination and neat dressing of all cable with lugs and glands with transferring the load as per required size of cable , including Cleaning and clearing of the total area where in work is in progress.The panel will incorporate the following:- INCOMER:125 A FP MCCB(L&T) 50 KA with rotary handle - 01 Nos.& RYB Lamp,FP, Al Busbar,VOLTMETER,AMMETER,SELECTION SWITCH. OUTGOING:A)32 A FP MCB 10 KA - 8 N os. B)40 A FP MCB - 2 Nos. |
| 152 | Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, 45 A TP contactor for automaticswitching of luminaries, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. |
| 153 | Supply, installation, testing and commissioning of High efficiency High power LED Sports floodlight 470 watts -500 Watts with PDC aluminum heat sink housing, MCPCB SMD type LED light engine construction, High efficiency secondary Optical lens for each LED's with temperature rating of, front diffuser of toughened glass and IP 65 / 66 construction. Driver to be mounted in a detachable IP65/ 66 grade weather proof PDC aluminum enclosure. Cable glands have to be minimum IP 66 grade single compression type for both enclosure and flood light housing and flood light housing with 5 pole loop in lopp out facility industrial grade type for 3x 2.5 sqmm copper flexible cable. Fixtures should comply as per the Manufacturers design conforming to the technical specifications for the above approved make as per the design of the bidder .The fittings shall be non-integral type & manufacturer to give declaration for maximum distance between permitted between the Flood light and the Drivers witho ut drop in light out performance.The fittings should have provision of precision aiming arrangement and graduated protector for angular aiming @ site. of Make Philips/Lighting Technology/Disanol/Sietecd Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender