Tender For Replacement Of Old Ms Windows With Upvc Windows On Ground Floor And Shaft Area In Main Office Premises Of Reserve Bank Of India, Patna
Tender Value
41.56 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
13 days left
EMD
83129
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patna → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Old Ms Windows With Upvc Windows On Ground Floor And Shaft Area In Main Office Premises Of Reserve Bank Of India, Patna
BOQ
| Sl. No. | Item Description |
| 1 | Removal of WindowsTaking out window and window shutters (steel), frame, Ventilator etc. including scaffolding, proper stacking of material at identified location and making good the damages as directed by Bank's Engineer.Of area 3 sqm. and below |
| 2 | Plaster repair worksProviding and applying internal plaster 15 mm or more thick plaster in cement mortar 1:4 (1 Cement: 4 fine sand) to wall surface in CM of desired proportions at all heights & levels with all leads & lifts matching to the surroundings including scaffolding, curing & site cleaning etc., all complete as directed by the Bank's Engineer-In-Charge. |
| 3 | uPVC Window Providing and Fixing factory made uPVC glazed windows comprising of lead free uPVC multi-chambered frame, sash and mullion /coupler (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10 mm for R3 and R4 profiles confirming to EN: 12608 in any shape, colour and design duly reinforced with galvanised mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and Inline sash adapter (Where ever required) of appropriate dimension, EPDM gasket, hardware,SS 304 grade fasteners of minimum 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing confirming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross section of uPVC profiles to be as per design approved by Bank's Engineer-in-Charge.Rate shall be inclusive of providing & fixing glazing of double glass unit (6mm clear toughened + 12mm ARG + 6mm clear toughened) with high performance coatings as per design requirement confirming to IS: 3548 & IS: 16321.Rate shall also be inclusive of sealing the gap between uPVC frame and walls with silicone and temporarily closing the window with commercial ply after removal of MS Windows till uPVC windows are fixed in its place, erection and dismantling of scaffolding for the work. |
| 4 | A) WindowCasement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles.Size of frame (50mm & above) x (45mm & above) & sash (45mm & above)x(78mm & above) & mullion (45mm &above)x(70mm & above). (Height upto1.8m).i) Size of Window: 0.85m X 1.47m |
| 5 | A) WindowCasement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles.Size of frame (50mm & above) x (45mm & above) & sash (45mm & above)x(78mm & above) & mullion (45mm & above)x(70mm&above).(Height upto1.8m).ii) Size of Window: 1.18m X 1.47m |
| 6 | B) Fixed window Casement window double panel with fixed mullion and with fixed panel with S.S. 304 friction hinges as per size and weight of sash, single-point locking system, zinc alloy (zamak) powder coated handles.Size of frame (50mm & above) x (45mm & above) & sash (45mm & above) x (78mm & above) & mullion (45mm & above) x (70mm & above). (Height upto 1.2m). i) Size of Ventilator: 0.85m X 1.47m |
| 7 | B) Fixed window Casement window double panel with fixed mullion and with fixed panel with S.S. 304 friction hinges as per size and weight of sash, single-point locking system, zinc alloy (zamak) powder coated handles.Size of frame (50mm & above) x (45mm & above) & sash (45mm & above) x (78mm & above) & mullion (45mm & above) x (70mm & above). (Height upto 1.2m).ii) Size of Ventilator: 0.85m X 1.16m |
| 8 | Wall Putty-Providing and applying white cement based putty of average thickness 1mm or more of approved brand and manufacturer, over plastered wall surface to prepare the surface even and smooth, including scaffolding etc. complete as directed by Bank's Engineer. |
| 9 | Plastic Emulsion Paint-Providing and applying a coat of oil-based cement primer of approved manufacturer and two or more coats of 1st quality premium acrylic emulsion paint of approved manufacturer and shade as per specifications to the walls, ceilings, columns, beam faces etc. complete as directed by Bank's Engineer. The rate shall include hacking of surface, sand papering, providing additional layers to get even and smooth surface, scaffolding required for completion of work. |
| 10 | Rebate |
| 11 | Buy-Back (ie minus)Rebate for carting away old MS windows along with glass removed from Bank Building for replacement with uPVC windows outside of Bank's premises and its disposal at a suitable location etc. complete as directed by Bank's Engineer. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender