Tender For Special Repair To Cook House (Building No. T-1) At Patiala Under Ge (South) Patiala
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Dec 2026
12 days left
EMD
35000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Cook House (Building No. T-1) At Patiala Under Ge (South) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | M&L for Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering all as specified and directed |
| 3 | M&L for Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, unframed work in any position complete all as specified and directed. |
| 4 | M&L for Dismantling/ Taking down framed wooden trusses exceeding 8.00m span but not exceeding 12.00 m span and removimg from site complete all as specified and directed. |
| 5 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 6 | S&F for Pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 7 | M&L For Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 8 | S&F Plates (plain or chequered ) channels,square cut or notched (ordinary and counter sunk ) and forming holes with riveted, bolted or welded attachment complete all specified and directed. |
| 9 | M&L for Dismantling of Brick work including all quoins and arches pillars etc built in cement mortar complete all as specified and directed. |
| 10 | M&L old size Brick work with Fly ash bricks minimum class designation 100 straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed. |
| 11 | M&L for Form work rough finished to sides and soffits of beams/ lintel bands/ roof bands/beams and the like structures complete all as specified and directed. |
| 12 | S&F TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed. |
| 13 | S&F TMT Bars 5mm to 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed. |
| 14 | M&L for Reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in beams/ lintel bands/ roof bands/beams and the like structures complete all as specified and directed. |
| 15 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 16 | M&L for Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in lime or mud mortar; not previously plastered; and scrubbing down with water etc. to receive plaster complete all as specified and directed |
| 17 | M&L for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately. |
| 18 | Supply only integral liquid water proofing compound complete all as specified and directed. |
| 19 | M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 20 | Supplying & applying for two component elastomeric acrylic polymer modified cementitious waterproofing coating on Brick level, SmartCare Damp Block 2K or approved equivalent, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTMC1202, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, will be apply on both Positive & Negative side and resist up to 5 Bars of Hydrostatic Pressure. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc. After coating will sprinkle Sand on the coating then apply plaster on the coating which is in contractor scope, complete as manufacturer specifications. 5 Year Warranty will be Provided only if Asian Paints Authorize Applicator will do the work. |
| 21 | M&L for Complete removal of existing treatment of any type/description from walls/RCC surfaces/ ceiling /chajjas/roof projections etc with mechanical means/grinder or manually (if directed) complete all as specified and directed. |
| 22 | M&L for applying acrylic thick wall care putty on external/internal surfaces of walls/ ceilings / soffits etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. |
| 23 | M&L for preparation of plastered Surfaces of wall apply two coats of oil bound distamper white or tinted, over and including a coat of primer including complete all specified and directed. |
| 24 | M&L for preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion and primer complete all as specified and directed. |
| 25 | Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed. |
| 26 | M&L for Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed |
| 27 | M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 7-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.Note : Dado should be flushed with the wall plastering. |
| 28 | M&L for Machine cut kota stone slab (nearest to 58cmx58cm in size) flooring 18mm (+ 2mm) thick laid over and including 20-22 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 100mm wide border of Baroda Green Marble complete all as specified and directed. |
| 29 | M&L for Machine cut kota stone slab (nearest to 58cmx58cm in size) flooring 18mm (+ 2mm) thick laid over and including 10 mm thick Rendering or bedding layer in cement mortar 1:4 as base laid and jointed with gray cement slurry mixed with pigment to match complete all as specified and directed. |
| 30 | M&L for pre-polished Baroda Green marble, machine cut as in floorings/ shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing incl 100mm wide border of White Marble in flooring complete all as specified and directed.Note : Single piece should be used in steps/cills/jambs/shelves. |
| 31 | M&L for Granite (Jet Black colour/shade-South Indian) of any type machine cut as in flooring, shelves/steps/counter tops, 18-20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing and bull nose on exposed sides/lengths complete all as specified and directed.Note : Single piece should be used in steps/cills/jambs/shelves. |
| 32 | M&L for rubbing, cutting and mirror type granite polishing of existing Kota Stone as in flooring, skirting, steps, shelves etc including filling joints with cement mixed with pigment of same colour complete all as specified and directed. |
| 33 | M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene complete all as specified and directed. |
| 34 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good to disturbed surfaces complete incl ventilators including reqd shape for hold fast block for new frame complete all as specified and directed. |
| 35 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 36 | S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame incl complete all as specified and directed. |
| 37 | M&L for cement concrete (1:2:4) using 12.50 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats, hold fasts etc., complete all as specified and directed. |
| 38 | S&F factory made flush shutters 30mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed. |
| 39 | S&F 35mm thick glazed and skelton shutters of 2nd class hard wood as in doors (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a);, kiln seasoned and chemically pressure treated complete all as specified and directed.Note : Glass or wire cloth, etc. in panels or sash squares shall bemeasured separately. |
| 40 | M&L for Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified and directed. |
| 41 | M&L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 42 | M&L for preparing old painted primed steel and iron surfaces of any description/section/position like trusses/purlins/frame work/struts etc and applying two coat of synthetic enamel paint upto 10m height complete all as specified and as directed. |
| 43 | S&F 50 micron powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 44 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions. |
| 45 | S&F Powder coated Aluminium alloy anodised extruded fabricated type hinges 100mm long complete all as specified and directed. |
| 46 | S&F Powder coated Aluminium alloy anodised extruded fabricated type handle 150mm long complete all as specified and directed. |
| 47 | S&F Powder coated Aluminium alloy, anodised, barrel tower bolt (bolt type) 150 mm long of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 48 | S&F stainless steel finished 202 Grade butt hinges 150 mm long complete all as specified and directed. |
| 49 | S&F stainless steel 202 Grade finished 200mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and directed. |
| 50 | S&F Stainless Steel 202 Grade Finished curved Handles 200 mm long complete all as specified and directed. |
| 51 | S&F Stainless Steel 202 Grade Finished Sliding Door Bolt/Aldrop 16 x 300mm with square nuckle complete all as specified and directed. |
| 52 | S&F 5 mm thick clear toughened glass for glazing works etc fixed with aluminium beads/uPVC windows any size of pane complete all as specified and directed. |
| 53 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 54 | S&F 300mm, mild steel ordinary rat tail rod (helical type) pattern springs including roller and roller plate complete all as specified and directed. |
| 55 | S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed. |
| 56 | M&L for Form work rough finished to soffits of suspended slabs such as roof slabs , shelves not exc 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 57 | M&L for Form work rough finished to edges of concrete slabs exc 5 cm but not exc 10 cm thick complete all as specified and directed. |
| 58 | M&L for Reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 59 | S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with both side white balancing (BSB) with density of 850 Kg/cu.m complete all as specified and directed.Note : Board on back side wall will be fixed with minimum 5mm PVC spacers/buffers. The payment for the same deemed to be included in the quoted unit rates. |
| 60 | S&F 18mm thick high Density High Moisture Resistant (HDHMR) exterior Grade Board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing with density of 850 Kg/cu.m complete all as specified and directed. |
| 61 | S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed. |
| 62 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified and directed. |
| 63 | S&F D-type cabinet handles premium quality, stainless steel gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified and directed. |
| 64 | M&L for 100mm size Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and directed |
| 65 | M&L for providing and fixing aluminium sliding windows with 50micron powder coating, three track sliding windows with two glazed shutters, 5mmthick tinted glass ordinary quality and one shutter of stainless steel wiremesh 0.36mm nominal dia of wire and average width of aperture 1.40mm including good quality of bearing handle, locks, including EPDM gasket to render the glazing,air and water tight etc complete all as specified and as directed. |
| 66 | S&F ISI marked doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including 20 mm dia brass float valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC water tank complete all as specified and directed. |
| 67 | S&F 15 mm fancy type chromium plated quarter turn bib tap of long body with CP wall flange cast copper alloy with crutch or butterfly handles screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and directed. |
| 68 | S&F 15 mm fancy type chromium plated quarter turn angle cock/valve with CP wall flange cast copper alloy screwed down high pressure suitable for 15mm bore pipe or union including taking down old unserviceable existing one complete all as specified and directed. |
| 69 | S&F in repair wire netting of galvanised steel wire 1.40mm dia of mesh size 25mm fixed with tinned tacks of wire staples complete all as specified and directed. |
| 70 | Taking up or down existing steel tubing and connections, 25mm bore complete all as specified and directed. |
| 71 | S&F 25mm (OD 27.20mm) CPVC pipes SDR 11, class-1 for potable hot and cold water distribution supplies lead free confirming to IS-15778 laid on walls/ceiling or laying in floors jointed with suitable CPVC solvent cement of same manufacturer and incl all CPVC SDR 11 fittings as required complete all as specified and directed. |
| 72 | S&F Female Brass Threaded Adaptor (FTA/ FBTA) for 20mm dia CPVC pipe complete all as specified and directed |
| 73 | S&F Brass elbow (3/4 x 1/2) for 20mm dia CPVC pipes complete all as specified and directed |
| 74 | S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for 25mm bore iron pipe or brass ferrule complete all as specified and as directed. |
| 75 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 76 | Taking down bends/floor traps/nahani traps/tee/branch pieces/cowls etc of in any position/size/description complete all as specified and directed. Please Enable Macros to View BoQ information |
| 77 | Taking down bends/floor traps/nahani traps/tee/branch pieces/cowls etc of in any position/size/description complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysDec 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender