Tender For Provision Of Parking Shed For 10 X Ambulance Vehicles, Car Parking Shed Alongwith Hard Standing Near Building No P-7 (Mi Room) And Foot Path With Interlocking Tiles On Both Sides Of The Road From Gate No. 01 To Physical Training Field At S
Tender Overview
Project Description
Tender for Provision Of Parking Shed For 10 X Ambulance Vehicles, Car Parking Shed Alongwith Hard Standing Near Building No P-7 (Mi Room) And Foot Path With Interlocking Tiles On Both Sides Of The Road From Gate No. 01 To Physical Training Field At Sangrur Under Ge (South) Patiala
BOQ
| Sl. No. | Item Description |
| 1 | 'Notes: (i) Please refer Schedule 'A' Notes of tender documents. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil including removal for surplus/ excavated soil to a distance n.exc 50 mtrs complete all as specified and directed. |
| 3 | M&L for PCC 1:3:6, type B-1, using 40mm graded stone aggregate as in foundation for post holes ,complete all as specified and direct by Engineer-in-charge |
| 4 | M&L for excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified. |
| 5 | S&F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws as specified |
| 6 | M&L for rectangle / Square /circular hollow section as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for structural purpose, fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) |
| 7 | M&L for preparation new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide as in primer all as specified and directed. |
| 8 | M&L for Hard core of broken stone boulders of gauge n exc. 63 mm spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface all as directed and specified |
| 9 | M&L for providing, cement concrete Type C1 1:3:6 (20mm graded aggregate) in plinth, Coping rounded or chamfered on edges complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in coping , bed plate and the like including weathering slightly rounded or chamferred angle and throating as directed including provision of necessary form work and finish exposed surface even and smoothwithout using extra cement complete all as specified and directed. |
| 11 | M&L for brick work with Fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed (as in manhole). |
| 12 | M&L for 15mm thick cement plastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished complete all as specified and directedNote : Water proofing compound shall be measured and paid saparately under item . |
| 13 | Supply only integral water proofing compound ISI marked complete all as specified and directed. |
| 14 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring.,complete all as specified and directed. |
| 15 | M&L for machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed. |
| 16 | M&L for preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint of approved shade all as specified and directed. |
| 17 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soils complete all as specified and directed. |
| 18 | Removing excavated material(soil) to a distance not exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed. |
| 19 | M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed. |
| 20 | S&F MS hollow rectangular/ square/ circular tubes/ pipes of Fe410-W(Gde-E-250) Grade as in frame work for roof/ rafter/ purline/ chajja/ trusses/ columns/ struts etc and like similar items etc. complete all as specified and directed. |
| 21 | S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sink) forming holes, without any attachment of Fe410-W(Gde-E-250) complete all as specified. |
| 22 | M&L for PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in foundation of posts and struts complete all as specified. |
| 23 | M&L for Cement concrete 1:4:8 Type D2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 24 | M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 25 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. |
| 26 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 finished even and smooth without using extra cement in external surfaces complete all as specified and directed. |
| 27 | M&L for providing and laying at or near ground factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharps curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender