Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #58495058

Tender For Special Repair To Convoy Briefing And Training Room (Building No. T-141) At Patiala Under Ge (South) Patiala

Issued by Statutory Bodies & Commissions/Committees · Patiala, Punjab
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
34600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Patiala → Punjab
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Special Repair To Convoy Briefing And Training Room (Building No. T-141) At Patiala Under Ge (South) Patiala

BOQ

Name of Work:- SPECIAL REPAIR TO CONVOY BRIEFING AND TRAINING ROOM (BUILDING NO. T-141) AT PATIALA UNDER GE (SOUTH) PATIALA
Sl. No. Item Description
1'Notes: (i) Please refer Schedule 'A' Notes of tender documents.
2M&L for Dismentling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
3Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section , unframed work in any position complete all as specified and directed.
4Dismantling/ Taking down framed wooden trusses exceeding 4.00m span but not exceeding 8.00 m span and removimg from site complete all as specified and directed.
5Dismantling of Brick work including all quoins and arches pillars etc built in cement mortar complete all as specified and directed.
6M&L old size Brick work with Fly ash bricks minimum class designation 100 straight or curved on plan exceeding 6m mean raidus bulit in C:M 1:6 complete all as specified and directed.
7Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
8M&L for Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in lime or mud mortar; not previously plastered; and scrubbing down with water etc. to receive plaster complete all as specified and directed.
9M&L for cement plastering 15mm thick in cement mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair without using extra cement complete all as specified and directed.Note : WPC will be measured and paid separately.
10Supply only integral liquid water proofing compound complete all as specified and directed.
11M&L for 10mm thick cement plastering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.
12M&L for complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder or manually (if directed) complete all as specified and directed.
13M&L for applying acrylic thick wall care putty on external/internal surfaces of walls/ ceilings / soffits etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed.
14M&L for preparation of plastered Surfaces of wall apply two coats of oil bound distamper white or tinted, over and including a coat of primer including complete all specified and directed.
15M&L for preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion and primer complete all as specified and directed.
16Demolition of cement concrete un-reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed.
17M&L cement concrete work 1:4:8 type D-2 in base of flooring etc complete all as specified and directed.
18M&L for Dismantling, floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.
19M&L for Full Body Vitrified Tiles joint free premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
20M&L for Full Body Vitrified Tiles joint free premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in skirting/dado etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 10 mm thick rendering in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.
21M&L for Granite (Jet Black colour/shade-South Indian) of any type machine cut as in flooring, shelves/steps/counter tops, 18-20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing and bull nose on exposed sides/lengths complete all as specified and directed.Note : Single piece should be used in steps/cills/jambs/shelves.
22M&L for pre-polished Baroda Green marble, machine cut as in floorings/ shelves/ steps/ cills/ jambs/ skirting/ border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing incl 100mm wide border of White Marble in flooring complete all as specified and directed.Note : Single piece should be used in steps/cills/jambs/shelves.
23M&L for reinforced Cement Concrete (RCC) 1:2:4 using 20mm graded stone aggregates as in beams/ lintel bands/ roof bands/beams and the like structures complete all as specified and directed.
24S&F Form work rough finished to sides and soffits of beams/ lintel bands/ roof bands/beams and the like structures complete all as specified and directed.
25M&L for TMT Bars 10mm dia & over cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed.
26M&L for TMT Bars 5mm to 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending spirally hoping for columns, hooking ends and binding with mild steel wire not less than 0.9 mm dia complete all as specified and directed.
27M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints and filling the same with polyureathene complete all as specified and directed.
28M&L For Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
29S&F Plates (plain or chequered ) channels,square cut or notched (ordinary and counter sunk ) and forming holes with riveted, bolted or welded attachment complete all specified and directed.
30S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.
31S&F pre-painted galvalumealuminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
32M&L for Preparing new steel surfaces and applying two coats of synthetic enamal paint over one coat of red oxide primer complete all as specified and directed.
33Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
34M&L for providing and fixing Glass Fiber Reinforced Gypsum (GRG) false ceiling system at all heights and levels, comprising 595 mm × 595 mm × 12 mm thick micro-tegular edged semi-perforated tiles manufactured from non-combustible gypsum casting plaster reinforced with a continuous filament glass fiber membrane conforming to IS 2095 (Part 3):2022, and maintaining a moisture content under 2%, minimum 99% RH humidity resistance, minimum 85% light reflectance, and a Noise Reduction Coefficient (NRC) between 0.50 to 0.75 tested as per IS 8225:1987, laid true to horizontal level on an interlocking, hot-dipped 15 mm wide visible GI T-Grid suspension framework (0.33 mm thick sheet steel with minimum zinc coating of 120 g/sqm) consisting of Main Runners, 1200 mm Cross Ts, and 600 mm secondary Cross Ts, securely suspended from the structural concrete roof slab via M-6 dash fasteners, 6 mm diameter fully threaded MS hanger rods (galvanized at 80 g/sqm), and 2 mm thick L-shape level adjusters, inclusive of all perimeter wall angles, scaffolding, structural reinforcement for cut-outs, and finishes, as per the design approved by the authority. The contractor shall mandatorily submit a comprehensive Manufacturer’s Test Certificate (MTC) issued directly by the original manufacturer for each material batch delivered to the site, explicitly verifying compliance with IS 2095 (Part 3):2022 product standards complete all as specified and directed.
35S&F WPC Louvers/ WPC Wall panelling of fluted/louvers/hollow sections/ (colour/pattern as approved by AO) of any size and description complete fixed in position in all respect including supply and fixing of all accessories like fasteners/ screws/solvent/ fillets etc all as recommended by manufacturer complete all as specified and directed.
36Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good to disturbed surfaces complete incl ventilators including reqd shape for hold fast block for new frame complete all as specified and directed.
37Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
38S&F door frames made of PPGI sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame incl complete all as specified and directed.Note : S&F of hinges shall be measured and paid separately under respective item.
39M&L for cement concrete (1:2:4) using 12.50 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats, hold fasts etc., complete all as specified and directed.
40S&F factory made flush shutters 30mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed.
41S&F 35mm thick glazed and skelton shutters of 2nd class hard wood as in doors (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a);, kiln seasoned and chemically pressure treated complete all as specified and directed.Note : Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
42M&L for Preparing new wooden surfaces and applying two coats of synthetic enamal paint over one coat of pink wood primer complete all as specified and directed.
43S&F 50 micron powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
44S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions or complete all as specified and directed.
45S&F Powder coated Aluminium alloy anodised extruded fabricated type handle 150mm long complete all as specified and directed.
46S&F Powder coated Aluminium alloy, anodised, barrel tower bolt (bolt type) 150 mm long of extruded section or cast aluminium alloy and fixed complete all as specified and directed.
47S&F Powder coated Aluminium alloy anodised extruded fabricated type hinges 100mm long complete all as specified and directed.
48S&F stainless steel finished 202 Grade butt hinges 125mm long complete all as specified and directed.
49S&F stainless steel 202 Grade finished 200mm long tower bolts in square shaped with minimum 10mm dia rod complete all as specified and directed.
50S&F Stainless Steel 202 Grade Finished curved Handles 200 mm long complete all as specified and directed.
51S&F Stainless Steel 202 Grade Finished Sliding Door Bolt/Aldrop 16 x 300mm with square nuckle complete all as specified and directed.
52S&F 5 mm thick clear toughened glass for glazing works etc fixed with aluminium beads/uPVC windows any size of pane complete all as specified and directed
53S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
54S&F 25mm bore minimum 1mm thick stainless steel finished curtain rods inlcuding stainless steel finished brackets and stainless steel finished finials and end plugs etc of same manufacturer including screws/rawl plugs as specified by manufacturer for fixing complete fixed in position all as specified and directed.
55M&L demolition of cement Concrete (unreinforced) of any description and in any position not otherwise specifically all as specified and directed
56M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
57M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded mechanically crushed stone aggregate as in benching, rounded or chamfered on edges, coving shall be 150 mm in radius complete all as specified and directed.
58M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n. exc. 50 mtrs complete all as specified and directed.
59Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in PCC/RCC of any size/description including taking out embedded portion and making good disturbed ground complete all as specified and directed.
60Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, including removal for surplus/excavated soil to a distance n.exc. 50 mtrs complete all as specified and directed.
61M&L for PCC 1:3:6 using using 20mm graded stone aggregates as in post holes etc complete all as specified and directed.
62Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. any type all as specified and as directed.
63Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.
64Taking down unservesiable MCCB DBs, MCB DBs including MCCBs/TPN/SPN/SP etc complete all as specified and as directed.
65M & L for Point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC concealed conduit, medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories including modular metal flush box with modular plate for mounting switches, sockets, fan regulators, etc and earth wire singlle core PVC insulated but unsheathed multistrand copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall complete all as specified and directed for the following :-
66One light point controlled by one switch one way
67One ceiling fan/exhaust fan point controlled by one switch.
68One socket outlet 5 Amp controlled by one switch on independent board
69One 3 pin 5Amps socket out let point on the same board controlled by one switch
70All as per Srl item No 65 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete, all as specified and directed.
71Supply and fixing in replacement of ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.
72Supply and fixing white finished single mounting modular plates sutable for modular accessories complete all as specified and directed of following sizes:-
73Suitable for 2 modules
74Suitable for 3 modules
75Suitable for 4 modules
76Supply and fixing of modular switch 1 way 6 Amps one module complete all as specified and directed.
77Supply and fixing in replacement of modular socket 6 Amps 2/3 Pin combined 02 module complete, all as specified and directed.
78Supply and fixing of modular switch one way 16 Amps, one module complete, all as specified and as directed.
79Supply and fixing of socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and as directed.
80Supply and fixing for lamp holder, PVC/poleycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed.
81Supply and fixing of Indoor decorative LED battens- integrated Box type 20 watt 4 feet white fixture with extruded aluminium body, suitable for LED tube 20 watt , bipin holder, connector block, LED rod 20 watt etc complete with all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
82Supply and fixing 240V, 10 KA 'C' curve MCB of SPN and current carrying capacity 40 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
83Supply and fixing for LED bulb 12 watt of CFL 11/15 watt fixed in pendent holder/bulk head fitting complete all as specified and directed.
84Supply and fixing in repalcement of vertical type load line distribution board, double door ,4 way , IP 43 IK08 AC, 3 phase, 415 volts, TPN bus bar and earth bar & din rail complete all as specified and as directed .
85Supply and fixing for MCCB, 4 pole 40 A, 16KA, 415Volts complete all as specified and directed .
86Supply and fixing in replacement of MCB, SP, 6-32A ,10KA complete all as specified and directed.
87Supply and fixing for sub main wiring with undermentioned run of single core PVC insulated but unsheathed FRLS cable of specified size multistranded copper conductor 1100 V grade IS-694 drawing into and including rigid non metallic PVC conduit, medium grade ISI marked ( not less than 20 mm) with all conduit fittings & fixing accessories for concealed in wall/ ceiling or surface incl the specified run of specified size earth continuity conductor of similar type of cable complete all as specified and directed. Note- The undermentioned runs of single core cable and specified earth continuity conductor and revelent conduit with fitting acessories will be measured as one run
882 run of 2.5 sq mm and one run of 2.5 sq mm
89Supply & Laying XLPE insulated screened bedded galvanied steel strip or wire armoured electric power cable ( heavy duty) with aluminium conductor 1100 V grade cross sectional area 25 sq mm 4 core.
90Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of Pipes, cables, poles,Stay and strips etc and getting out in Soft/Loose soil complete all as specified and directed.
91Returning, filling-in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.
92Removing excavated material not exceeding 50m and depositing where directed at a level of not exceeding 1.5m above the starting point complete all as specified and directed.
93Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.
94M&L for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and directed .
95M&L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 cm x 6.00 mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to and including GI earth lead of GI wire 4.00 mmthick by means of steel bolts, nuts, check nuts and washers test points by GI pipe 40X8 mm 10 cm long,PCC 1:2:4 type B-1 in pit, angle iron 25x25x3mm frame work with precast RCC 1:2:4type B-1 cover reinforced with 8 mm dia TMT bars @ 150 mm C /C both ways and 12 mm dia MS fabricated handle, mediam grade GI water pipe 20 mm bore with funnel, wire mesh and light gradeGI protection pipe 40 mm bore upto 5 M length for drawing in earth lead , salt charcol etc including excavation in earth work in any type of soil, removal of surplus soil to a distance not exceeding 50 m complete , all as shown in Electric plate No 3 of MES schedule 2009 Part-I and connected complete including testing on completion all as specified and directed. Please Enable Macros to View BoQ information
96M&L for earthing complete with galvanised steel earth plate electrode 600 mm x 600 cm x 6.00 mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to and including GI earth lead of GI wire 4.00 mmthick by means of steel bolts, nuts, check nuts and washers test points by GI pipe 40X8 mm 10 cm long,PCC 1:2:4 type B-1 in pit, angle iron 25x25x3mm frame work with precast RCC 1:2:4type B-1 cover reinforced with 8 mm dia TMT bars @ 150 mm C /C both ways and 12 mm dia MS fabricated handle, mediam grade GI water pipe 20 mm bore with funnel, wire mesh and light gradeGI protection pipe 40 mm bore upto 5 M length for drawing in earth lead , salt charcol etc including excavation in earth work in any type of soil, removal of surplus soil to a distance not exceeding 50 m complete , all as shown in Electric plate No 3 of MES schedule 2009 Part-I and connected complete including testing on completion all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58495058
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 03-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Special Repair To Convoy Briefing And Training Room (Building No. T-141) At Patiala Under Ge (South) Patiala
Basic Detail
Tender No GE(S)/PAT/T-90/2026-27
Bidding Type Tender
Location
City Patiala
State Punjab
Key Dates
Publish Date 12 Nov 2026
Submission Date 03 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 34600
Exemption Available
Document List
6e36d452-e1e1-434a-bb58-ea1722aef524.html
BOQ_895598.xls
T-90.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

6e36d452-e1e1-434a-bb58-ea1722aef524.html

xls

BOQ_895598.xls

pdf

T-90.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender