Tender For Repairs To Firing Range At Air Force Station Ojhar.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
19 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Firing Range At Air Force Station Ojhar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed. |
| 2 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers not exc 15 cm thick spread, leveled and rammed including watering complete all as specified. |
| 3 | Surface dressing not exc 15cm deep in soft/loose soil complete all as directed. |
| 4 | Supply & spreading sand under interlocking tiles as sand cushioning with dry sand and compacted with mechanical vibrator , joints of blocks filled complete all as specified & directed. |
| 5 | M & L for Hard core of broken hard stone or boulders of guage not exceeding 63 mm , deposited spread as subbase to inter locking tiles in layers n.exc 15cm thick , watered & well rammed to true surface complete all as specified and directed. |
| 6 | M&L for P.C.C 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in coping and on roof/benching over chajja etc complete all as specified and as directed. |
| 7 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified. |
| 8 | M&L for factory made 80mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-40 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.(Note : Sand for cushoining & filling of sand in joints measured & paid seperately). |
| 9 | Labour only for mechanical sieving of a 1:1 mixture of fine river sand and sawdust at the Fire Arm Small Range Target, including removal of oversized particles, granular matter and other foreign/waste materials; spreading, dressing and levelling the sieved mixture to the required thickness and gradient; and maintaining the specified levels by adding additional fine river sand and sawdust in the prescribed ratio wherever required, complete in all respects and as directed by the Engineer-in-Charge.The sand–sawdust mixture shall be laid and maintained in such a manner that a 16 mm diameter plain steel bar, when dropped vertically from a height not exceeding 1.50 metre, penetrates the prepared mixture to a depth of approximately 900 mm. |
| 10 | All same as per item No 9 here-in-above but height exceeding 1.50 Mts but not exceeding 3.0 Mts -do- |
| 11 | All same as per item No 9 here-in-above but height exceeding 3.00 Mts but not exceeding 4.50 Mts -do- Please Enable Macros to View BoQ information |
| 12 | All same as per item No 9 here-in-above but height exceeding 3.00 Mts but not exceeding 4.50 Mts -do- Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender