Educational and Research Institute Boards / Undertakings / PSU Closing in 15 days TDR #58494036

Bids Are invited for Traumatic Maxillofacial Surgery Instrument Set

Issued by Boards / Undertakings / PSU · Aligarh, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Dec 2026
15 days left
EMD
80000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
122

Project Description

Bids Are invited for Midface Screw 1.5 Mm, Self Tapping, Length 4 Mm, Tit , Midface Screw 1.5 Mm, Self Drilling, Length 4 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 6 Mm, Tit , Midface Screw 1.5 Mm, Self Drilling, Length 6 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 8 Mm, Tit , Midface Screw 1.5 Mm, Self Drilling, Length 8 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 10 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 12 Mm, Ti , Midface Emergency Screw 1.8 Mm, Self Tapping, Length 4 Mm, Titanium Alloy Tan, Pack Of 1 U , Midface Emergency Screw 1.8 Mm, Self Tapping, Length 6 Mm, Titanium Alloy Tan, Pack Of 1 U , Midface Emergency Screw 1.8 Mm, Self Tapping, Length 8 Mm, Titanium Alloy Tan, Pack Of 1 U , Midface Drill Bit 1.25 Mm, Length 80 Mm, 2 Flute, For J Latch Coupling , Drill Bit 1.1 Mm With Stop, Length 44.5 By 4 Mm, For J Latch Coupling , Drill Bit 1.1 Mm With Stop, Length 44.5 By 6 Mm, For J Latch Coupling , Drill Bit 1.1 Mm With Stop, Length 44.5 By 8 Mm, For J Latch Coupling , Screwdriver Shaft Midface, Long, Self Holding, Length 96 Mm, With Hexagonal Coupling , Screwdriver Shaft Midface, Long, With Holding Sleeve, , Module Mandible Compact Trauma, 3 By 3, With Lid, Without , Plate Holder, Long , Bending Pliers 3D For Midface Plates , Depth Gauge For Mandible, Measuring Range From 6 To 40 , Cutting Scissors For Mesh Plates, Long , Bending Pliers For Midface Plates , Plate Cutter For Midface , Cutting Pliers, For Mandible Plates 1.0 To 1.5, Length , Orbital Retractor, Left , Orbital Retractor, Right , Handle, Medium, With Hexagonal Coupling , Double Drill Guide 2.0 By 1.5 , Reduction Forceps With Points, Ratchet Lock, Length 180 Mm , Reduction Forceps With Points, Ratchet Lock, Length 140 Mm , Plate Holder For Reversible Plates , Arch Bar , Ss Wire 24 And 26G , Midface Compact Module, 3 By 3 , Midface Anatomic Orbital Floor Plate, Small, Thickness 0.3 Mm, Pure Titanium , Midface Orbital Floor Mesh Plate, Thickness 0.3 Mm, Pure Titanium , Midface Orbital Rim Plate, 12 Holes, Thickness 0.4 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.4 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Left, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Right, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Left, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Right, Thickness 0.5 Mm, Pure Titanium , Midface Orbital Rim Plate, 12 Holes, Thickness 0.5 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.5 Mm, Pure Titanium , Midface Y Plate, 3 Holes, Thickness 0.5 Mm, Pure Titanium , Midface Double Y Plate, 6 Holes, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Left, Thickness 0.7 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Right, Thickness 0.7 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Left, Thickness 0.7 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Right, Thickness 0.7 Mm, Pure Titanium , Midface T Plate, 3 Plus 4 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Orbital Rim Plate, 12 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Adaption Plate, 6 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Adaption Plate, 8 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.7 Mm, Pure Titanium , Midface H Plate, 11 Holes, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Left, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Right, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Left, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Right, Thickness 0.8 Mm, Pure Titanium , Midface T Plate, 3 Plus 4 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Adaption Plate, 6 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Adaption Plate, 8 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Preformed Orbital Plate, Small, Left, Pure Titanum , Midface Preformed Orbital Plate, Small, Right, Pure Ti , Midface Preformed Orbital Plate, Large, Right, Pure Ti , Midface Preformed Orbital Plate, Large, Left, Pure Titanum , Combination Module Customized Tray And Lid , Mandible Plate, Straight, 12 Holes, Thickness 2.0 Mm, , Mandible Plate, Straight, 20 Holes, Thickness 2.0 Mm, , Mandible Reconstruction Plate, Angled, Left, 7 Plus 23 Hole , Mandible Reconstruction Plate, Angled, Right, 7 Plus 23 Hol , Mandible Reconstruction Plate, Straight, 12 Holes, Thi , Mandible Reconstruction Plate, Straight, 20 Holes, Thi , Mandible Reconstruction Plate, Angled, Left, 7 Plus 23 Hole , Mandible Reconstruction Plate, Angled, Right, 7 Plus 23 Hol , Mandible Preformed Reconstruction Plate, Medium, Right, Thickness 2.5 Mm, Pure Titanium , Mandible Preformed Reconstruction Plate, Medium, Left, Thickness 2.5 Mm, Pure Titanium , Mandible Screw 2.4 Mm, Self Tapping, Length 6 Mm, Ti , Mandible Screw 2.4 Mm, Self Tapping, Length 8 Mm, Ti , Mandible Screw 2.4 Mm, Self Tapping, Length 10 Mm, T , Mandible Screw 2.4 Mm, Self Tapping, Length 12 Mm, T , Mandible Screw 2.4 Mm, Self Tapping, Length 14 Mm, T , Mandible Screw 2.4 Mm, Self Tapping, Length 16 Mm, T , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 8 M , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 10 , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 12 , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 14 , Mandible Emergency Screw 2.7 Mm, Self Tapping, Lengt , Mandible Emergency Screw 2.7 Mm, Self Tapping, Lengt , Mandible Emergency Screw 2.7 Mm, Self Tapping, Lengt , Bending Template For Mandible Reconstruction Plate, An , Drill Sleeve 1.8, Short, With Thread, For Mandible , Drill Sleeve 2.4, Short, With Thread, For Mandible , Screwdriver Shaft Mandible, Long, Not Self Holding , Holding Sleeve, Long, For No. 03.503.068 , Screwdriver Shaft Mandible, Long, Self-Holding, For He , Drill Bit 1.8 Mm, Length 90 Mm, For J-Latch Coupling, For , Module Mandible Compact Recon, 3 By 3, With Lid, Without Contents , Depth Gauge For Mandible, Measuring Range From 6 To 40 , Bending Pliers With Nose, For Mandible Plates , Shortcut For Mandible Plates, Thickness 1.5 To 2.8, W , Bending Iron For Mandible Plates, Left , Bending Iron For Mandible Plates, Right , Handle, Medium, With Hexagonal Coupling , Tap For Cortex Screws 2.4 Mm, Length 100 By 45 Mm , Tap For Cortex Screws 2.4 Mm, Length 125 By 45 Mm , Holding Forceps With Ball, Ratchet Lock, Length 180 Mm , Reduction Forceps With Points, Ratchet Lock, Length 180 Mm , Reduction Forceps With Points, Ratchet Lock, Length 140 Mm , Mandible Recon Instrument Tray , Imf Screw 2.0 Mm, Length 8 Mm, Stainless Steel , Imf Screw 2.0 Mm, Length 12 Mm, Stainless Steel , Drill Bit 1.5 Mm With Stop, Length 44.5 By 12 Mm, 2 Flute, For Mini Quick Coupling , Drill Bit 1.5 Mm With Stop, Length 44.5 By 8 Mm, 2 Flute, For Mini Quick Coupling , Wire Cutting Scissors, Straight , 2.4Mm Sleeve , Screwdriver Shaft 2.4, Cruciform, Not Self Holding , Handle, Medium, With Quick Coupling , Module Imf Screws 2.0 Mm, With Lid, Without Contents

BOQ

Sl. No. Item TitleItem Description
1MIDFACE Screw 1.5 mm, self tapping, length 4 mm, TitAs per specifications enclosed
2MIDFACE Screw 1.5 mm, self drilling, length 4 mm, TiAs per specificationsenclosed
3MIDFACE Screw 1.5 mm, self tapping, length 6 mm, TitAs per specificationsenclosed
4MIDFACE Screw 1.5 mm, self drilling, length 6 mm, TiAs per specificationsenclosed
5MIDFACE Screw 1.5 mm, self tapping, length 8 mm, TitAs per specificationsenclosed
6MIDFACE Screw 1.5 mm, self drilling, length 8 mm, TiAs per specificationsenclosed
7MIDFACE Screw 1.5 mm, self tapping, length 10 mm, TiAs per specificationsenclosed
8MIDFACE Screw 1.5 mm, self tapping, length 12 mm, TiAs per specificationsenclosed
9MIDFACE Emergency Screw 1.8 mm, self tapping, length 4 mm, Titanium Alloy TAN, pack of 1 uAs per specificationsenclosed
10MIDFACE Emergency Screw 1.8 mm, self tapping, length 6 mm, Titanium Alloy TAN, pack of 1 uAs per specificationsenclosed
11MIDFACE Emergency Screw 1.8 mm, self tapping, length 8 mm, Titanium Alloy TAN, pack of 1 uAs per specificationsenclosed
12MIDFACE Drill Bit 1.25 mm, length 80 mm, 2 flute, for J Latch CouplingAs per specificationsenclosed
13Drill Bit 1.1 mm with Stop, length 44.5 by 4 mm, for J Latch CouplingAs per specificationsenclosed
14Drill Bit 1.1 mm with Stop, length 44.5 by 6 mm, for J Latch CouplingAs per specificationsenclosed
15Drill Bit 1.1 mm with Stop, length 44.5 by 8 mm, for J Latch CouplingAs per specificationsenclosed
16Screwdriver Shaft MIDFACE, long, self holding, length 96 mm, with Hexagonal CouplingAs per specificationsenclosed
17Screwdriver Shaft MIDFACE, long, with Holding Sleeve,As per specificationsenclosed
18Module MANDIBLE Compact Trauma, 3 by 3, with Lid, withoutAs per specificationsenclosed
19Plate Holder, longAs per specificationsenclosed
20Bending Pliers 3D for MIDFACE PlatesAs per specificationsenclosed
21Depth Gauge for MANDIBLE, measuring range from 6 to 40As per specificationsenclosed
22Cutting Scissors for Mesh Plates, longAs per specificationsenclosed
23Bending Pliers for MIDFACE PlatesAs per specificationsenclosed
24Plate Cutter for MIDFACEAs per specificationsenclosed
25Cutting Pliers, for MANDIBLE Plates 1.0 to 1.5, lengthAs per specificationsenclosed
26Orbital Retractor, leftAs per specificationsenclosed
27Orbital Retractor, rightAs per specificationsenclosed
28Handle, medium, with Hexagonal CouplingAs per specificationsenclosed
29Double Drill Guide 2.0 by 1.5As per specificationsenclosed
30Reduction Forceps with Points, ratchet lock, length 180 mmAs per specificationsenclosed
31Reduction Forceps with Points, ratchet lock, length 140 mmAs per specificationsenclosed
32Plate Holder for reversible PlatesAs per specificationsenclosed
33ARCH BARAs per specificationsenclosed
34SS WIRE 24 and 26GAs per specificationsenclosed
35MIDFACE Compact Module, 3 by 3As per specificationsenclosed
36MIDFACE Anatomic Orbital Floor Plate, small, thickness 0.3 mm, Pure TitaniumAs per specificationsenclosed
37MIDFACE Orbital Floor Mesh Plate, thickness 0.3 mm, Pure TitaniumAs per specificationsenclosed
38MIDFACE Orbital Rim Plate, 12 holes, thickness 0.4 mm, Pure TitaniumAs per specificationsenclosed
39MIDFACE Adaption Plate, 20 holes, thickness 0.4 mm, Pure TitaniumAs per specificationsenclosed
40MIDFACE L Plate, 2 plus 3 holes, left, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
41MIDFACE L Plate, 2 plus 3 holes, right, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
42MIDFACE L Plate, 3 plus 4 holes, left, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
43MIDFACE L Plate, 3 plus 4 holes, right, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
44MIDFACE Orbital Rim Plate, 12 holes, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
45MIDFACE Adaption Plate, 20 holes, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
46MIDFACE Y Plate, 3 holes, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
47MIDFACE Double Y Plate, 6 holes, thickness 0.5 mm, Pure TitaniumAs per specificationsenclosed
48MIDFACE L Plate, 2 plus 3 holes, left, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
49MIDFACE L Plate, 2 plus 3 holes, right, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
50MIDFACE L Plate, 3 plus 4 holes, left, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
51MIDFACE L Plate, 3 plus 4 holes, right, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
52MIDFACE T Plate, 3 plus 4 holes, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
53MIDFACE Orbital Rim Plate, 12 holes, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
54MIDFACE Adaption Plate, 6 holes, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
55MIDFACE Adaption Plate, 8 holes, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
56MIDFACE Adaption Plate, 20 holes, thickness 0.7 mm, Pure TitaniumAs per specificationsenclosed
57MIDFACE H Plate, 11 holes, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
58MIDFACE L Plate, 2 plus 3 holes, left, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
59MIDFACE L Plate, 2 plus 3 holes, right, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
60MIDFACE L Plate, 3 plus 4 holes, left, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
61MIDFACE L Plate, 3 plus 4 holes, right, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
62MIDFACE T Plate, 3 plus 4 holes, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
63MIDFACE Adaption Plate, 20 holes, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
64MIDFACE Adaption Plate, 6 holes, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
65MIDFACE Adaption Plate, 8 holes, thickness 0.8 mm, Pure TitaniumAs per specificationsenclosed
66MIDFACE Preformed Orbital Plate, small, left, Pure TitanumAs per specificationsenclosed
67MIDFACE Preformed Orbital Plate, small, right, Pure TiAs per specificationsenclosed
68MIDFACE Preformed Orbital Plate, large, right, Pure TiAs per specificationsenclosed
69MIDFACE Preformed Orbital Plate, large, left, Pure TitanumAs per specificationsenclosed
70COMBINATION module customized tray and lidAs per specificationsenclosed
71MANDIBLE Plate, straight, 12 holes, thickness 2.0 mm,As per specificationsenclosed
72MANDIBLE Plate, straight, 20 holes, thickness 2.0 mm,As per specificationsenclosed
73MANDIBLE Reconstruction Plate, angled, left, 7 plus 23 holeAs per specificationsenclosed
74MANDIBLE Reconstruction Plate, angled, right, 7 plus 23 holAs per specificationsenclosed
75MANDIBLE Reconstruction Plate, straight, 12 holes, thiAs per specificationsenclosed
76MANDIBLE Reconstruction Plate, straight, 20 holes, thiAs per specificationsenclosed
77MANDIBLE Reconstruction Plate, angled, left, 7 plus 23 holeAs per specificationsenclosed
78MANDIBLE Reconstruction Plate, angled, right, 7 plus 23 holAs per specificationsenclosed
79MANDIBLE Preformed Reconstruction Plate, medium, right, thickness 2.5 mm, Pure TitaniumAs per specificationsenclosed
80MANDIBLE Preformed Reconstruction Plate, medium, left, thickness 2.5 mm, Pure TitaniumAs per specificationsenclosed
81MANDIBLE Screw 2.4 mm, self tapping, length 6 mm, TiAs per specificationsenclosed
82MANDIBLE Screw 2.4 mm, self tapping, length 8 mm, TiAs per specificationsenclosed
83MANDIBLE Screw 2.4 mm, self tapping, length 10 mm, TAs per specificationsenclosed
84MANDIBLE Screw 2.4 mm, self tapping, length 12 mm, TAs per specificationsenclosed
85MANDIBLE Screw 2.4 mm, self tapping, length 14 mm, TAs per specificationsenclosed
86MANDIBLE Screw 2.4 mm, self tapping, length 16 mm, TAs per specificationsenclosed
87MANDIBLE LOCK Screw 2.4 mm, self tapping, length 8 mAs per specificationsenclosed
88MANDIBLE LOCK Screw 2.4 mm, self tapping, length 10As per specificationsenclosed
89MANDIBLE LOCK Screw 2.4 mm, self tapping, length 12As per specificationsenclosed
90MANDIBLE LOCK Screw 2.4 mm, self tapping, length 14As per specificationsenclosed
91MANDIBLE Emergency Screw 2.7 mm, self tapping, lengtAs per specificationsenclosed
92MANDIBLE Emergency Screw 2.7 mm, self tapping, lengtAs per specificationsenclosed
93MANDIBLE Emergency Screw 2.7 mm, self tapping, lengtAs per specificationsenclosed
94Bending Template for MANDIBLE Reconstruction Plate, anAs per specificationsenclosed
95Drill Sleeve 1.8, short, with thread, for MANDIBLEAs per specificationsenclosed
96Drill Sleeve 2.4, short, with thread, for MANDIBLEAs per specificationsenclosed
97Screwdriver Shaft MANDIBLE, long, not self holdingAs per specificationsenclosed
98Holding Sleeve, long, for No. 03.503.068As per specificationsenclosed
99Screwdriver Shaft MANDIBLE, long, self-holding, for HeAs per specificationsenclosed
100Drill Bit 1.8 mm, length 90 mm, for J-Latch Coupling, forAs per specificationsenclosed
101Module MANDIBLE Compact Recon, 3 by 3, with Lid, without ContentsAs per specificationsenclosed
102Depth Gauge for MANDIBLE, measuring range from 6 to 40As per specificationsenclosed
103Bending Pliers with Nose, for MANDIBLE PlatesAs per specificationsenclosed
104Shortcut for MANDIBLE Plates, thickness 1.5 to 2.8, wAs per specificationsenclosed
105Bending Iron for MANDIBLE Plates, leftAs per specificationsenclosed
106Bending Iron for MANDIBLE Plates, rightAs per specificationsenclosed
107Handle, medium, with Hexagonal CouplingAs per specificationsenclosed
108Tap for Cortex Screws 2.4 mm, length 100 by 45 mmAs per specificationsenclosed
109Tap for Cortex Screws 2.4 mm, length 125 by 45 mmAs per specificationsenclosed
110Holding Forceps with Ball, ratchet lock, length 180 mmAs per specificationsenclosed
111Reduction Forceps with Points, ratchet lock, length 180 mmAs per specificationsenclosed
112Reduction Forceps with Points, ratchet lock, length 140 mmAs per specificationsenclosed
113MANDIBLE RECON Instrument TrayAs per specificationsenclosed
114IMF Screw 2.0 mm, length 8 mm, Stainless SteelAs per specificationsenclosed
115IMF Screw 2.0 mm, length 12 mm, Stainless SteelAs per specificationsenclosed
116Drill Bit 1.5 mm with Stop, length 44.5 by 12 mm, 2 flute, for Mini Quick CouplingAs per specificationsenclosed
117Drill Bit 1.5 mm with Stop, length 44.5 by 8 mm, 2 flute, for Mini Quick CouplingAs per specificationsenclosed
118Wire Cutting Scissors, straightAs per specificationsenclosed
1192.4MM SLEEVEAs per specificationsenclosed
120Screwdriver Shaft 2.4, cruciform, not self holdingAs per specificationsenclosed
121Handle, medium, with Quick CouplingAs per specificationsenclosed
122Module IMF Screws 2.0 mm, with Lid, without ContentsAs per specificationsenclosed

AI Tender Summary

OUR REF NO 58494036
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 03-12-2026
Authority
Authority Name Aligarh Muslim University
Work Description Bids Are invited for Midface Screw 1.5 Mm, Self Tapping, Length 4 Mm, Tit , Midface Screw 1.5 Mm, Self Drilling, Length 4 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 6 Mm, Tit , Midface Screw 1.5 Mm, Self Drilling, Length 6 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 8 Mm, Tit , Midface Screw 1.5 Mm, Self Drilling, Length 8 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 10 Mm, Ti , Midface Screw 1.5 Mm, Self Tapping, Length 12 Mm, Ti , Midface Emergency Screw 1.8 Mm, Self Tapping, Length 4 Mm, Titanium Alloy Tan, Pack Of 1 U , Midface Emergency Screw 1.8 Mm, Self Tapping, Length 6 Mm, Titanium Alloy Tan, Pack Of 1 U , Midface Emergency Screw 1.8 Mm, Self Tapping, Length 8 Mm, Titanium Alloy Tan, Pack Of 1 U , Midface Drill Bit 1.25 Mm, Length 80 Mm, 2 Flute, For J Latch Coupling , Drill Bit 1.1 Mm With Stop, Length 44.5 By 4 Mm, For J Latch Coupling , Drill Bit 1.1 Mm With Stop, Length 44.5 By 6 Mm, For J Latch Coupling , Drill Bit 1.1 Mm With Stop, Length 44.5 By 8 Mm, For J Latch Coupling , Screwdriver Shaft Midface, Long, Self Holding, Length 96 Mm, With Hexagonal Coupling , Screwdriver Shaft Midface, Long, With Holding Sleeve, , Module Mandible Compact Trauma, 3 By 3, With Lid, Without , Plate Holder, Long , Bending Pliers 3D For Midface Plates , Depth Gauge For Mandible, Measuring Range From 6 To 40 , Cutting Scissors For Mesh Plates, Long , Bending Pliers For Midface Plates , Plate Cutter For Midface , Cutting Pliers, For Mandible Plates 1.0 To 1.5, Length , Orbital Retractor, Left , Orbital Retractor, Right , Handle, Medium, With Hexagonal Coupling , Double Drill Guide 2.0 By 1.5 , Reduction Forceps With Points, Ratchet Lock, Length 180 Mm , Reduction Forceps With Points, Ratchet Lock, Length 140 Mm , Plate Holder For Reversible Plates , Arch Bar , Ss Wire 24 And 26G , Midface Compact Module, 3 By 3 , Midface Anatomic Orbital Floor Plate, Small, Thickness 0.3 Mm, Pure Titanium , Midface Orbital Floor Mesh Plate, Thickness 0.3 Mm, Pure Titanium , Midface Orbital Rim Plate, 12 Holes, Thickness 0.4 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.4 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Left, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Right, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Left, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Right, Thickness 0.5 Mm, Pure Titanium , Midface Orbital Rim Plate, 12 Holes, Thickness 0.5 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.5 Mm, Pure Titanium , Midface Y Plate, 3 Holes, Thickness 0.5 Mm, Pure Titanium , Midface Double Y Plate, 6 Holes, Thickness 0.5 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Left, Thickness 0.7 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Right, Thickness 0.7 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Left, Thickness 0.7 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Right, Thickness 0.7 Mm, Pure Titanium , Midface T Plate, 3 Plus 4 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Orbital Rim Plate, 12 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Adaption Plate, 6 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Adaption Plate, 8 Holes, Thickness 0.7 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.7 Mm, Pure Titanium , Midface H Plate, 11 Holes, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Left, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 2 Plus 3 Holes, Right, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Left, Thickness 0.8 Mm, Pure Titanium , Midface L Plate, 3 Plus 4 Holes, Right, Thickness 0.8 Mm, Pure Titanium , Midface T Plate, 3 Plus 4 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Adaption Plate, 20 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Adaption Plate, 6 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Adaption Plate, 8 Holes, Thickness 0.8 Mm, Pure Titanium , Midface Preformed Orbital Plate, Small, Left, Pure Titanum , Midface Preformed Orbital Plate, Small, Right, Pure Ti , Midface Preformed Orbital Plate, Large, Right, Pure Ti , Midface Preformed Orbital Plate, Large, Left, Pure Titanum , Combination Module Customized Tray And Lid , Mandible Plate, Straight, 12 Holes, Thickness 2.0 Mm, , Mandible Plate, Straight, 20 Holes, Thickness 2.0 Mm, , Mandible Reconstruction Plate, Angled, Left, 7 Plus 23 Hole , Mandible Reconstruction Plate, Angled, Right, 7 Plus 23 Hol , Mandible Reconstruction Plate, Straight, 12 Holes, Thi , Mandible Reconstruction Plate, Straight, 20 Holes, Thi , Mandible Reconstruction Plate, Angled, Left, 7 Plus 23 Hole , Mandible Reconstruction Plate, Angled, Right, 7 Plus 23 Hol , Mandible Preformed Reconstruction Plate, Medium, Right, Thickness 2.5 Mm, Pure Titanium , Mandible Preformed Reconstruction Plate, Medium, Left, Thickness 2.5 Mm, Pure Titanium , Mandible Screw 2.4 Mm, Self Tapping, Length 6 Mm, Ti , Mandible Screw 2.4 Mm, Self Tapping, Length 8 Mm, Ti , Mandible Screw 2.4 Mm, Self Tapping, Length 10 Mm, T , Mandible Screw 2.4 Mm, Self Tapping, Length 12 Mm, T , Mandible Screw 2.4 Mm, Self Tapping, Length 14 Mm, T , Mandible Screw 2.4 Mm, Self Tapping, Length 16 Mm, T , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 8 M , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 10 , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 12 , Mandible Lock Screw 2.4 Mm, Self Tapping, Length 14 , Mandible Emergency Screw 2.7 Mm, Self Tapping, Lengt , Mandible Emergency Screw 2.7 Mm, Self Tapping, Lengt , Mandible Emergency Screw 2.7 Mm, Self Tapping, Lengt , Bending Template For Mandible Reconstruction Plate, An , Drill Sleeve 1.8, Short, With Thread, For Mandible , Drill Sleeve 2.4, Short, With Thread, For Mandible , Screwdriver Shaft Mandible, Long, Not Self Holding , Holding Sleeve, Long, For No. 03.503.068 , Screwdriver Shaft Mandible, Long, Self-Holding, For He , Drill Bit 1.8 Mm, Length 90 Mm, For J-Latch Coupling, For , Module Mandible Compact Recon, 3 By 3, With Lid, Without Contents , Depth Gauge For Mandible, Measuring Range From 6 To 40 , Bending Pliers With Nose, For Mandible Plates , Shortcut For Mandible Plates, Thickness 1.5 To 2.8, W , Bending Iron For Mandible Plates, Left , Bending Iron For Mandible Plates, Right , Handle, Medium, With Hexagonal Coupling , Tap For Cortex Screws 2.4 Mm, Length 100 By 45 Mm , Tap For Cortex Screws 2.4 Mm, Length 125 By 45 Mm , Holding Forceps With Ball, Ratchet Lock, Length 180 Mm , Reduction Forceps With Points, Ratchet Lock, Length 180 Mm , Reduction Forceps With Points, Ratchet Lock, Length 140 Mm , Mandible Recon Instrument Tray , Imf Screw 2.0 Mm, Length 8 Mm, Stainless Steel , Imf Screw 2.0 Mm, Length 12 Mm, Stainless Steel , Drill Bit 1.5 Mm With Stop, Length 44.5 By 12 Mm, 2 Flute, For Mini Quick Coupling , Drill Bit 1.5 Mm With Stop, Length 44.5 By 8 Mm, 2 Flute, For Mini Quick Coupling , Wire Cutting Scissors, Straight , 2.4Mm Sleeve , Screwdriver Shaft 2.4, Cruciform, Not Self Holding , Handle, Medium, With Quick Coupling , Module Imf Screws 2.0 Mm, With Lid, Without Contents
Basic Detail
Tender No GEM/2026/B/8262552
Bidding Type Tender
Location
City Aligarh
State Uttar Pradesh
Key Dates
Publish Date 12 Nov 2026
Submission Date 03 Dec 2026
Open Date 04 Dec 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 80000
Exemption Not Available
Document List
cfd7a70e-b664-4d41-9e6c-960063274467.pdf
specsmerged_2026-11-11-11-51-01_db9d344981645ce2861cc9cee36e9710.pdf
10152633_Boq_1.xlsx
Specs_2f0f811e-24fe-48e7-bd441794382177571_buyer4.amu.aljn.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
pdf

cfd7a70e-b664-4d41-9e6c-960063274467.pdf

pdf

specsmerged_2026-11-11-11-51-01_db9d344981645ce2861cc9cee36e9710.pdf

xlsx

10152633_Boq_1.xlsx

amu

Specs_2f0f811e-24fe-48e7-bd441794382177571_buyer4.amu.aljn.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender