Tender For General-Puthalam Junction Improvement--Site Investigation Work For Puthalam Junction Improvement At Eranadu Lac-General Civil Work
Tender Value
1.43 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
1 days left
EMD
3593
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Puthalam Junction Improvement--Site Investigation Work For Puthalam Junction Improvement At Eranadu Lac-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | INVESTIGATION WORK |
| 2 | OD185048/2026-2027:Detailed topographic survey using Total station/mobile Lidar and preparation of site plan withcontour intervals of 5mx5m of minimum of 15m on either side of the center line and takingcross section details at 25m intervals on strait roads and 10m interval on curves ( surveyincludes details of all features as mentioned in the scope of the in plain terrain work within thelimit of survey). The survey shall be include Chainage-wise details of villages and establishingDGPS Control points at starting and ending of the project in pairs and at 4Km intervals (inpairs) in plain and rolling terrains 2.5Km intervals ( in pairs) in hilly terrains. It shall alsoinclude establishing inter visible traverse control points not morethan 250m apart with accuracy at least 1:10000 and desirable 1:20000 in distance measurement.Elevations on each of the control points connected to MSL of GTS Bench marks. Usingprecision levelling. Separate bench marks need not be established. Including Taking sufficientColor copy prints (5nos) |
| 3 | OD185050/2026-2027:Providing and fixing RCC pillars for DGPS controll points of size 0.30x0.30m,0.5m long 0.1mabove ground level and 0.4m below GL casted in M20 grade concrete reinforced with 4 nos of8mm dia longitudinal bars and 6mm dia stirrups @ 0.15 c/c, firmly fixed in position by meansof PCC of 0.1m wide 0.4m deep around the pillers in M15 grade concrete below GL includingpainting two coats of exposed surface with synthetic enamal paint. |
| 4 | OD185049/2026-2027:Providing and fixing RCC pillars at every 250m intervals along the road ,of size 0.15mx0.15m,0.45m long, 0.15m above GL and 0.3m below GL casted in M20 grade concrete reinforcedwith 4nos of 8mm dia longitudinal bars and 6mm dia stirrups @ 0.15m C/c firmly fixed inposition by means of PCC of 0.075m wide and 0.3m deep around the pillars M15 gradeconcrete below GLincluding two coats on exposed surface with sythetic enamel paint. |
| 5 | OD185051/2026-2027:Data for inventory survey for up to 12m wide road survey work for collecting the detais of roadinventories and recording in prescribed format attached based on the chainage markingincluding marking chainage at 50m intervals and taking details such as existing carriage waywidth,shoulders width , type of shoulder, width and location of approach road, details ofexisting drains ,culverts and bridges as given in the prescribed format .attached pavementconditions(details of potholes,ravailing,fog seal,slurry seal edge damage etc ) road safetymeasures (detail of road sign,crash barrier,guard stone,delineator post hazzard markers ete) andall other existing retaining structures on road ,including documentation charges asper thedirection of the officers at site. |
| 6 | investigation 2 |
| 7 | OD185052/2026-2027:Study of pavement composition by cuttng open pit at tar edge to get the details of layers(thickness and type) of pavement composition - at one location as suggested by the engineer incharge. Carefullyby excavating pit of area 1.00x0.60m through over laying bituminious andgranular layer including BC,BM,WMMand GSB at tar edge and refilling and compacting theexcavated pit to lines and levels with excavated materialsas directed by the departmentalofficers at site and reporting the pavement composition with photographs andmeasurementsspecifying the type of layers. |
| 8 | OD185053/2026-2027:Turning Movement survey at Three Arm Junction.Conducting Turing movement survey atjunction for one day for peak hours between 7am to 7.00 pm as instructed by the engineer byrecording the classified volume count in prescribed format, including provisions for engagingtechnicians and setting up of stations etc and completing the data and submitting the same inhard and soft copy etc complete as per the instructions of PWD officials. (For all type oftraffic) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender