Tender For Epoxy Painting Of Draft Tube (Dt) Gates, Trt Gates, Trt Gantry And Dt Gantry Along With Provision Ofoverhead Protection To The Eot Crane And Emergency Gate, Including Allied Panels By Way Of Design, Fabrication And Installation Of A Canopy
Tender Overview
Project Description
Tender for Epoxy Painting Of Draft Tube (Dt) Gates, Trt Gates, Trt Gantry And Dt Gantry Along With Provision Ofoverhead Protection To The Eot Crane And Emergency Gate, Including Allied Panels By Way Of Design, Fabrication And Installation Of A Canopy Shed At The Gate Chamber Of Bhep-I.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Nov-2026 | General Corrigendum No. 01 Dated 17.11.2026 | Other | 03-Dec-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Providing and laying cement concrete in kerbs, steps and the like at or near ground level including curing, excluding the cost of centring, shuttering, and finishing. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form work for:Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 4 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 5 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 mm diametre |
| 6 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\") as specified. |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes |
| 8 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete. |
| 9 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height madewith 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system withM.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. andmaintaining it in a serviceable condition for the required duration asapproved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connectionwith the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of thescaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration ofscaffolding. |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering andpreparing the surface smooth including necessary repairs to scratches etc. complete. |
| 11 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile OrganicCompound) content. With ready mixed red oxide zinc chromatic on steel / iron workshaving VOC content less than 250 grams/ liter |
| 12 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’sspecifications including appropriate priming coat, preparation of surface, etc completeOn steel work |
| 13 | Carriage of Sand 50 kms by MT |
| 14 | Carriage of Aggreggate 14 kms by MT |
| 15 | Carriage of Cement for 10 Kms by MT |
| 16 | Carriage of Steel for 50 Kms by MT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 14 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender