Public Administrative Department Local Bodies Closing in 0 days TDR #58493745

Tender For Construction Of Post Mortem Room At Rural Hospital Premises Under Nagar Panchayat Ashti, Tq.Ashti, Dist.Beed.

Issued by Local Bodies · Beed, Maharashtra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
19998
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Beed → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Post Mortem Room At Rural Hospital Premises Under Nagar Panchayat Ashti, Tq.Ashti, Dist.Beed.

BOQ

Name of Work:- CONSTRUCTION OF POST MORTEM ROOM AT RURAL HOSPITAL PREMISES UNDER NAGAR PANCHAYAT ASHTI, TQ.ASHTI, DIST.BEED.
Sl. No. Item Description
1Laying and Jointing PVC Pipe. Heading
2Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m.beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming,watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means.Page No-189, SSR Item No.-21.02.
3Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means.Page No-189, SSR Item No.-21.06
4Providing soling using 80 mm size trap metal in15cm.layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.Page No-194, SSR Item No.-21.40.
5Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand .Page No-216, SSR Item No.-24.08
6Providing and laying in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft , strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water , formwork, laying/ pumping cover blocks, compact ion and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer )etc. complete.With natural sand/V.S.I. quality Artificial Sand.Bd.Page No-219, SSR Item No.-25.11
7Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detai led designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compact ion finishing the formed surfaces wi th cement mor tar 1:3 of sufficient minimum thickness to give a smooth and even sur face or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/V.S.I. quality Artificial SandBd . Page No-221, SSR Item No.-25.31
8Providing and laying Cast in situ/ Ready Mix cement concrete M-20 of trap/granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and st ructural steel). with fully automatic micro processor based PLCwi th SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer ) etc. complete. With natural sand/ V.S.I. quality Artificial Sand. Page No-223, SSR Item No.-25.50
9Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.Page No-223, SSR Item No.-25.50
10Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/ quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed sur faces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer ) etc.complete.With natural sand/V.S.I. quality Artificial Sand.Page No-225, SSR Item No.-25.70
11Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying / pumping, compaction, finishing un even and honey combed surface with C.M.1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finishis to be provided and curing etc. complete. (Excludinge inforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)etc.complete.With fine aggregate (Crushed sand VSI Grade).Page No-229, SSR Item No.-26.25
12Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).Page No-185, SSR Item No.-26.17
13Providing and fixing in position TMT -FE -500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Page No-233, SSR Item No.-26.33
14Providing second class Burnt Brick masonry with convent ional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.Page No-242, SSR Item No.-27.01
15Providing second class Burnt Brick masonry with conventional/I.S.type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.Complete. Page No-242, SSR Item No.-27.05
16Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the sur face of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for four teen days scaffolding etc.complete.Page No-257, SSR Item No.-32.11
17Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete Page No-256, SSR Item No.-32.05
18Providing internal cement plaster 20 mm thick in Single coats in cement mortar 1:5 with out neeru finish,to concrete, brick surface, in all positions including scaffolding and curing etc. complete.Page No-257, SSR Item No.-32.06
19Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Page No-280, SSR Item No.-36.12
20Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in single coat including scaffolding, preparing the surface.(excluding the primer coat )etc.complete. Page No-280, SSR Item No.-36.16
21Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to10 mm thickness and confirming IS.15622-2006 (Group Bla ) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc .complete.Page No-217, SSR Item No.-33.42
22Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to10mm thickness and confirming IS.15622-2006(Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete.Page No-266, SSR Item No.-33.43
23Providing and laying telephone black /Amba White/Cadbury brown/Ruby red/Ocean Brown granite stone of 18 to 20mm thick for door frame/dado/window boxing etc.On C.M.1:6 including filling joints with polymer base filler nosing /moulding the sharp edges wherever necessary, curing, etc. complete. Page No-264, SSR Item No.-40.07
24Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.Page No-329, SSR Item No.-40.02
25Providing and fixing in position (as per 1868 / 1982 ) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90mm at weight 0.637 Kilogram / One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30mm at weight 1.070 Kilogram / One Running Metre. .Top and side track section 92 x 31.75 x 1.30mm at weight 0.933 Kilogram / Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417Kilogram / One Running Metre.Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram / Running metre. and handle and top section 40 x 18 x 1.25 mm at weigh to .417Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium. Page No-316, SSR Item No.-39.43
26Providing and fixing the Country cut teak wood second class fully glazed openable fan light rectangular in shape as per detailed drawing excluding the frame, stainless steel fixtures and fastenings and finishing the wood work with 3 coats of oil painting.Page No-303, SSR Item No.-39.03
27Providing and fixing 100 mm diastabiliser pipe/P.V.C. soilvent/waste pipe and with necessary fixtures and fitting such as bends ,tees ,single junctions ,slotted vent,clamps etc.complete. Page No-349, SSR Item No.-42.52
28Providing and fixing on walls/Ceiling/floor 15mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Page No-349, SSR Item No.-42.55
29Providing and fixing on walls/ceiling /floor 40mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.Page No-350, SSR Item No.-42.59
30Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories suchas inlet, out let over flow of all tanks capacity above 1000 to 20,000 litres.Page No-349, SSR Item No.-42.54
31Providing and fixing 15 mm dia. screw down bib/stop tap of brass including necessary socket union nut complete.Page No-337, SSR Item No.-41.40
32Providing and fixing white glazed earthen ware Wash Hand Basin of 45 cm x 30 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plug sand brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the out side face of the wall .Making good the damaged surface, testing etc. complete.Page No-339, SSR Item No.-41.64
33Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.Page No-341, SSR Item No.-41.80
34Compressive Strength (3 set of cubes)
35a) For sand = Royalty + surcharge (2%) + Distt. Mineral Foundation Cess (10%) = 211.95+4.23+21.19 = 237.37 Per Cum
36b) For All Other Minerals = Royalty + surcharge (2%) = 211.95+4.23 = 216.18 per cum
37GST 18 %
38Add 0.5% for labour insurance Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58493745
AUTHORITY Local Bodies
TENDER VALUE Ref. Documents
LAST DATE 19-11-2026
Authority
Authority Name Nagar Panchayat
Work Description Tender for Construction Of Post Mortem Room At Rural Hospital Premises Under Nagar Panchayat Ashti, Tq.Ashti, Dist.Beed.
Basic Detail
Tender No E-tender/NPA/02/2026/27
Bidding Type Tender
Location
City Beed
State Maharashtra
Key Dates
Publish Date 12 Nov 2026
Submission Date 19 Nov 2026
Open Date 21 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 1180
EMD 19998
Exemption Not Available
Document List
BOQ_2307266.xls
e0d77ebe-fc50-4a36-b3e3-00592247e108.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2307266.xls

html

e0d77ebe-fc50-4a36-b3e3-00592247e108.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender