Tender For Tn04-04/ Kadathur Block/ Linganaickanahalli / Mdms -2026-2027 Construction Of Kitchen Cum Store Room At Linganaickanahalli Ghs Head Of Linganaickanahalli
Tender Value
8.44 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
8440
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dharmapuri → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tn04-04/ Kadathur Block/ Linganaickanahalli / Mdms -2026-2027 Construction Of Kitchen Cum Store Room At Linganaickanahalli Ghs Head Of Linganaickanahalli
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Kitchen cum Store Room at Linganaickanahalli GHS H/O Linganaickanahalli |
| 2 | 1. Earth work excavation and depositing on bank with initial lead and list in all clauses as soil as per SS 20 B |
| 3 | 2. Cement concrete 1:4:8 mix using 40mm metal including cost and Conveyance of all site etc. Complete. |
| 4 | 3. Refilling the Basement with Excavated earth Other than sand compling the standard Specification. |
| 5 | 4. Brick work in cm 1:5 Mix using new country bricks including cost and Conveyance of all site etc. complete. |
| 6 | 5. Supplying erecting steel centering for lintel, sunshade and Roof slab etc complete Column GB to RL |
| 7 | Grade Beam Sides |
| 8 | Roof Slab Bottom, Roof Level Beam, Roof Level Beam Bottom |
| 9 | 6. Cement concerete 1:1.5:3 using 20mm.H.B.G.jelly for all R .c.c. items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including curing but providing fixtures like fanclamps |
| 10 | 7. Supply and fabrication of sted including , cutting, bending and binding wires etc. complete. |
| 11 | 8. Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work. |
| 12 | 9. Providing granolethic floor finish ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete for 10 cum |
| 13 | 10. Plastering in CM 1:5 mix using 12mm thick including cost conveyance of all site etc. complete. |
| 14 | 11. Distember two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete |
| 15 | 12. Exterior Emulsion Painting two coats over using approved colour pigments including cost and conveyance of all materials to site and all labour charges etc complete |
| 16 | 13. Painting two coats for Door & Ventilator including cost and Conveyance of all site etc. Complete. |
| 17 | 14. Supply and Fixing of Steel door , Window, Ventilator Door D1 (0.90X 2.10) |
| 18 | Window (1.20X 1.30) |
| 19 | 15. Supply and fixing of Cuddappa Slab including cost and Conveyance of all site etc. Complete. |
| 20 | 16. Provision for 100mm Rainwater Down Fall Pipe |
| 21 | 17. Provision for Electrification arrangements a) Light & Fan Point SD.no.20 |
| 22 | b) Supply&Fixing of Tube Light SD.no.88 |
| 23 | c) CFL Sd.No.80 |
| 24 | d) Supply&Fixing of Street light SD.no.94 |
| 25 | e) supply & fixing of Exhaust fan |
| 26 | f) Plug Point SD.no.36 |
| 27 | g) Power Plug Point SD.no.39 |
| 28 | h) S & Fixing DP Main swetch SD.no.142 |
| 29 | i) Service pipe SD.no.70 |
| 30 | j) Service Connection wire SD.no.65 |
| 31 | 18. Provision For Water Supply arrangmenta) 32mm PVC Pipe |
| 32 | b) 32mm PVC Elbow |
| 33 | c) 32mm PVC Tee |
| 34 | d) 32x15mm PVC Reducer |
| 35 | e) 15mm PVC Tap |
| 36 | 20. Provision of Name Board |
| 37 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender