Housing Urban and Rular Development Government Departments Closing in 4 days TDR #58493032

Tender For Widening Streinthening Of Ramsinghpur To Sikhadi (Odr) Road In Distt Ghazipur (5 Year Maintenance Work)

Issued by Government Departments · Jaunpur, Uttar Pradesh
Tender Value
3.91 Crore
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
21.55 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Jaunpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Widening Streinthening Of Ramsinghpur To Sikhadi (Odr) Road In Distt Ghazipur (5 Year Maintenance Work)

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 17-Nov-2026 DateCorrigendum Date 26-Nov-2026

BOQ

Name of Work:- Widening Streinthening of Ramsinghpur to Sikhadi (ODR) Road in Distt Ghazipur (5 year maintenance work)
Sl. No. Item Description
1Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m ( Including all material & T&P etc. complete. & Excluding cost of GST)
2Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. ( Including all material & T&P etc. complete. & Excluding cost of GST)
3Construction of embankment with approved material obtained from ROW with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. without lead.( Including all material & T&P etc. complete. & Excluding cost of GST)
4Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 ( Including all material & T&P etc. complete. & Excluding cost of GST)
5Providing, laying and spreading of graded stone aggregate (WMM) after mixing with 4% portland cement with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform single layer with paver as cemented base on sub base/subgrade( modified soil) and compacting with the road roller to achieve unconfined compressive strength as specified by Engr-in-charge ( Including all material & T&P etc. complete. & Excluding cost of GST)
6Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (WMM) ( Including all material & T&P etc. complete. & Excluding cost of GST)
7Providing and laying prime coat with bitumin emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 Kg/ Sqm. using mechanical means as per Technical specification clause 502(1).
8Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects ( Including all material & T&P etc. complete. & Excluding cost of GST)
9Providing and Laying of Rubber moulded (Red Colour) Interlocking Concrete Block Pavements having thickness 80 mm including leveling and dressing of surface to required level and slope, spreading and moisting 30m thick local sand on bend, filling joints with local sand on bend, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification Clause 1504.Rate As per SOR ( Including all material & T&P etc. complete. & Excluding cost of GST)
10P/L hot applied thermoplastic compund 2.5 mm thick including reflectionsing glass beads @ 250 gms per sqm area thickness of 2.5 mm is exculusive of suraface applied gllass beads as per IRC:35 the finished surface to be level uniform and free from
11Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated / Tranvers bar)P/L hot applied thermoplastic compund 5 mm thick including reflectionsing glass beads @ 5000 gms per sqm area thickness of 5 mm is exculusive of suraface applied gllass beads as per IRC:35-2015 the finished surface to be level uniform and free from from streaks and holes.( Including all material & T&P etc. complete. & Excluding cost of GST)
12Direction of Place identification sign with size more than 0.9 sqm size board providing & irecting direction & place identification reflectorised sign as per IRC 67 made of high intensity grade sheeting vide clause 801.3 fixed over alluminium sheeting 2 mmthick area exceeding 0.90 Sqm supported on a mils steel angle iron post 75 mm x 75mm x 6mm 2 no. Firmly fixed to the ground by means of property designed foundation with M 15 grade cement concreate 45 cm x 60cm, below ground level as per approved drawing with 7 years warranty . Rate include desing fabrication supply transportation and errection of the sign board and slso inclusive of all taxes royallty etc. All T&P Machine material and labour required for proper comletion of work. Note. The composite warranty jointly singed by original manufacturer & authorise converter of at least 7 years shall be furnised on non judicial stamp of required denomination both for retro reflective sheet and also complete signage. Si no new item 3(i) ch, 27.1/C all cess labour cess levy toll free contractor profit but excluding GST.
13Supply & Fixing of M S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can be concealed with thermoplastic body. The posts shall have lan ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steel Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtaini clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory / Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years.outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. ( Including all material & T&P etc. complete. & Excluding cost of GST)
14STOP SIGNS Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. ( Including all material & T&P etc. complete. & Excluding cost of GST)
15SPEED LIMIT Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing. ( Including all material & T&P etc. complete. & Excluding cost of GST)
16VILLAGE SIGN BOARD Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing.( Including all material & T&P etc. complete. & Excluding cost of GST)
17T-BOARD Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium sheeting 4 mm thick supported on a mild steel angle iorn post 35 mm x35 mm x35 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing.( Including all material & T&P etc. complete. & Excluding cost of GST)
18TRAFFIC SIGNS- HAZARD MARKER Providing and fixing of retro-reflectroised cautionary mandatory and informantory sign as per IRC 67 mode of high intensity grade sheeting vide clause 801.3 fixed cover aluminium soling. 1.5 mm thick supported on a mild steel angle iorn post 75 mm x75 mm firmly fixed to the ground by means of properly designed foundation wtih M-15 grade cement concrete 45 cmx 45 cmx60 cm, 60 cm below gruund level as per approved drawing.( Including all material & T&P etc. complete. & Excluding cost of GST)
19Supply of Laying of pavement marker ( cat eye) of 3 m or avery Dennission company at S.V name of poly carbonate with electrically welded promate retroreflective lenson both side for maximum retro relective in wet and dry condition with 3 m bitumin adhesive B.T.69 ( Including all material & T&P etc. complete. & Excluding cost of GST)
20Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No. 300-2 ( Including all material & T&P etc. complete. & Excluding cost of GST)
21Plain Cement concrete with 4 cm gauge approved stone ballast, approved coarse sand and cement in the proportion of 1:3:6 including supply of all materials, labour, T&P etc. required for proper completion of work as per direction of Engineer-in-Charge. as ( Including all material & T&P etc. complete. & Excluding cost of GST)
22M-150 brick in 1:3 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and tools & plants, etc required for proper completion of the work. as per MORTH Specification. ( Including all material & T&P etc. complete. & Excluding cost of GST)
23Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 fineness modulous including supply of all materials, labour and T&P etc. required for proper completion of the work as per direction of Engineer-in-Charge. SI ( Including all material & T&P etc. complete. & Excluding cost of GST)
24Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.( Including all material & T&P etc. complete. & Excluding cost of GST)
25Supplying, fitting, and placing MS bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202, for Bars below 36 mm dia including over laps and wastage, where they are not welded.( Including all material & T&P etc. complete. & Excluding cost of GST)
26Providing and laying of 900 mm dia NP-3 hume pipe medium duty confirm to IS 458:2003 including collars/spigot jointed with dtiff mixture of cement in the proportion of 1:2 (1cement:2 fine sand) including testing of joints, all taxes, transportation charges & contractor's profit etc complete SI NO 026. ( Including all material & T&P etc. complete. & Excluding cost of GST)
27Providing and laying of 600 mm dia NP-3 hume pipe medium duty confirm to IS 458:2003 including collars/spigot jointed with dtiff mixture of cement in the proportion of 1:2 (1cement:2 fine sand) including testing of joints, all taxes, transportation charges & contractor's profit etc complete SI NO 026. ( Including all material & T&P etc. complete. & Excluding cost of GST)
28Providing and laying of 450 mm dia NP-3 hume pipe medium duty confirm to IS 458:2003 including collars/spigot jointed with dtiff mixture of cement in the proportion of 1:2 (1cement:2 fine sand) including testing of joints, all taxes, transportation charges & contractor's profit etc complete. ( Including all material & T&P etc. complete. & Excluding cost of GST)
29Maintainance cost :- Maintainance cost will be paid year wise as per Government order No. 17/2024/SA.-113/23-1-2024-23-1099/113/2023 Date 16.01.2024 and HQ UPPWD,Lucknow order No. 3689COPRMC/Mul-23-24 Date 17.02.2024
301st year- maintainance cost 0% on Bituminous Work (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)
312nd year- maintainance cost 0.25% on Bituminous Work (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)
323rd year- maintainance cost 0.50 % on Bituminous Work (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)
334th year- maintainance cost 0.75% on Bituminous Work (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST)
345th year- maintainance cost 1.00 % on Bituminous Work (Including labour Material T&P etc. complete as per direction of E/I & also including all taxes. Labour cess but excluding GST) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58493032
AUTHORITY Government Departments
TENDER VALUE 3.91 Crore
LAST DATE 26-11-2026
Authority
Authority Name Public Works Department
Work Description Tender for Widening Streinthening Of Ramsinghpur To Sikhadi (Odr) Road In Distt Ghazipur (5 Year Maintenance Work)
Basic Detail
Tender No 5208/SETender/jnp-gzp circle/26 Date-13-10-2026
Bidding Type Tender
Location
City Jaunpur
State Uttar Pradesh
Key Dates
Publish Date 17 Nov 2026
Submission Date 26 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value 3.91 Crore
Tender Fee 2714
EMD 21.55 Lakhs
Exemption Available
Document List
58d1b4c8-30cd-4607-9044-de6aa75c9891.html
BOQ_2291237.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 17, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 4 days
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

58d1b4c8-30cd-4607-9044-de6aa75c9891.html

xls

BOQ_2291237.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender