Tender For special Repair To Bldg No P-9 In Asd Line At Cod Under Ge (East) Jabalpur
Tender Value
38.35 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
11 days left
EMD
76700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-9 In Asd Line At Cod Under Ge (East) Jabalpur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Nov-2026 | BOQ Corrigendum | BOQ | 03-Dec-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Water Proofing Treatment on \\"Non Approachable/Non Accessible and Approachable Roof\\" surfaces (Horizontal & Vertical surfaces) in following sequence through manufacturer/authorized applicator of the manufacturer complete all as specified and directed & Appicabale for 1.1 to 1.5 |
| 2 | M&L for rendering 10 mm thick in cement mortar 1:4 on roof or concrete surfaces complete all as specified and directed. |
| 3 | M&L for applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg per Sqm complete all as specifed and directed |
| 4 | M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg per Sqm including cleaning surfaces complete all as specifed and directed |
| 5 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen coated surface with 100 mm overlaps shall be sealed by flame as per manufacturer's instruction. including removal of existing one complete all as specified and directed. |
| 6 | M&L for ceramic cool roof tiles of design as approved 9-10 mm thick (square/rectangular), area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 7 | Supply only liquid water proofing compound ISI marked |
| 8 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) as in roof padding/kerbs/sunken slab etc complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 11 | Dismantling stone slabs & tiles of any description or thickness in floors, aprons etc., laid bedded & pointed in any mortar complete all as specified and directed. |
| 12 | M&L for light shade vitrified ceramic tiles of approved design , 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 13 | All as per item No 7 here-in-before but as in skirting/dado & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 14 | M&L for light shade vitrified Ceramic Parking/ step tile of design as approved 9-10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 15 | M&L for non skid coloured ceramic tiles of design as approved, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes complete all as specified and directed. |
| 16 | M&L for Glazed coloured ceramic tiles 350 x 250 x 7 mm/450 x 350 x 7 mm thick in vertical surface such as dado/skirting/risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 17 | M&L for colour rubber moulded chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete & including 15 mm thick CM 1:4 screed bed types complete all as specified and directed. |
| 18 | S&F in repair, Soap Dish Holder any type fixed to plug with chromoium plated brass screw complete all as specified and directed. |
| 19 | S&F in repair, Toilet Seat/Commode Jet Spray (Regular Type) (1.50 meter) Stainless Steel Grade 304 (Built-in Installation Type) for 15 mm dia of bore of pipe complete all as specified and directed. |
| 20 | M&L for Machine cut Cudapph stone slab on cooking platform/shelf 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete & including 15 mm thick CM 1:4 screed bed complete all as specified and directed. |
| 21 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 22 | M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations complete all as specified and directed. |
| 23 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.50M clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed. |
| 24 | Excavation over areas n.exc. 1.5m deep and getting out in any type of soil complete all as specified and directed |
| 25 | Removal excavated material to a distance not exceeding 50 m and depositing where directed at a level n. exc. 1.5 m above starting point as in soils complete all as specified and as directed. |
| 26 | M&L for Moorum/red bajri filling, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering as required complete all as specified and directed.Note: Consolidated thickness shall be measured. |
| 27 | M&L for Hard core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 28 | M&L for 25mm thick PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in floor finishes laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for 75mm thick PCC 1:4:8 type C-1 using 20 mm graded crushed stone aggregate as in sub base/floor base laid in panels & finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | M&L for 75 mm thick Cement Concrete type C-2, 1:3:6 (using 40 mm graded crushed stone aggregate) as in plinth protection etc & finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. |
| 31 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed. |
| 32 | M&L for Brick work with old size subclass ‘B’ bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 33 | M&L for Brick work withold size subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 34 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 35 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L for rendering 5 mm thick in cement mortar 1:3 on RCC ceiling surface and finished even and smooth (without using extra cement) complete all as specified and directed . |
| 37 | M&L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed. |
| 38 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying two coats of oil bound distemper over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed. |
| 39 | M&L for complete removal of existing treatment on plasterd brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on brick work or concrete surfaces complete all as specified and directed . |
| 40 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying 2 mm thick Wall Care Putty on newly plastered or unplastered brick work or concrete surfaces complete all as specified and directed . |
| 41 | M&L for applying two coats of cement based paint on brick work or concrete surfaces over & including one coat of alkali resistant priming paint on prepared brick work or concrete surfaces complete all as specified and directed. |
| 42 | M&L for preparation of newly plastered or unplastered brick work or concrete surfaces & applying three coats of white wash on prepared brick work or concrete surfaces complete all as specified and directed. |
| 43 | M&L for preparation of old plastered brick work or concrete surfaces & applying two coat of cement based paint on brick work or concrete surfaces complete all as specified and directed. |
| 44 | M&L for preparation of old plastered brick work or concrete surfaces & applying two coat of oil bound distemper on brick work or concrete surfaces complete all as specified and directed. |
| 45 | M&L for preparation of old plastered ceiling surfaces & applying one coat of white wash on ceiling surfaces complete all as specified and directed. |
| 46 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coats of synthetic enamel paint (ordinary tint) over & including one coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 47 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity, (minimum triple layer) hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed. |
| 48 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, (minimum triple layer), hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store complete all as specified and directed. |
| 49 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms) complete all as specified and directed. |
| 50 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe complete all as specified and directed. |
| 51 | M&L for Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed. |
| 52 | Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 53 | Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 54 | Supplying & Laying of 20 mm Outer Diameter, CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 55 | S&F 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls/ceilings or laid in floors of any length all as specified and directed |
| 56 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore of pipe complete all as specified and directed. |
| 57 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore of pipe complete all as specified and directed. |
| 58 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 59 | S&F of Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 60 | M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exc 4 kg/sqm complete all as specified and directed. (height upto 12.50m) |
| 61 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, conforming to Fe-290 (Gde-E-165) complete all as specified and directed. |
| 62 | S&F for 0.63 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. complete all as specified and directed. |
| 63 | Demolition of cement concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all specified and directed. |
| 64 | Repairing sunken floor leakage as per following steps:-Surface preparation:-(i) Prior to application of Dr fixit powercrete, ensure to clean the substrate which shoud be free from all the dust, foreign particles, loose aggregate and oil grease etc. This can be done with the help of scarifying, grinding water jetting and sand blasting etc.(ii) The surface should be wetted well prior to application throughly with water to get SSD condition.(iii) All the depression or pin holes/pot holes to be repaired using Dr Fixit powercrete method mortar in mixing ratio of (1 kg cement : 1.50 kg silica sand : 0.50kg of Dr Fixit powercrete).Coating application:-(i) Mix Cement with Dr. Fixit Powercrete in ratio of 1 : 0.50 ( 1 kg cement OP C53 : 0.50 Dr. Fixit Powercrete ) by weight.(ii) The mix should be stirred thoroughly until smooth homogeneous paste is obtained.(iii) Apply first coat over SSD/wet condition substrate.(iv) Apply and unroll woven glass fibre cloth evenly on the wet coating before it dries out on larger areas.(v) Using a nylon brush, apply a coat of Dr. Fixit Powercrete coating over the glass fabric so as to cover the fabric, allow 5-6 hours of air drying before application of another coat of Dr. Fixit Powercrete slurry coating over the surface.(vi) Provide polymer modified protective plaster of 15-20 mm thick over the coating to ensure safety from mechanical damage. |
| 65 | Curing:-(i) Allow Dr. Fixit Powercrete coating to air cure for 3-6 hours after the final coat.(ii) Do not allow the rapid drying of the coating by covering the coating with help of polythene sheet in case of high humidity and windy condition.(iii) However, a moist curing after the air drying is advisable.(iv) Following the moist curing, Dr. Fixit Powercrete coating shall be allowed to air cured for 3 days before submerging it in water.Note - The above procedure is given for Dr Fixit Powercrete, any other equivalent make may please be used as per their manufacturer instruction subject to approved by Engr-in-Charge. |
| 66 | S&F in repair 15 mm bore, fancy type, chromoium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 67 | S&F in repair, Brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe complete all as specified and directed. |
| 68 | S&F in repair, Chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe complete all as specified and directed. |
| 69 | S&F in repair, Chromium plated Two-way Bib Cock for 15 mm bore of pipe complete all as specified and directed. |
| 70 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 71 | S&F in repair, 15 mm dia of bore, fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe & fixed complete all as specified and directed. |
| 72 | S&F in repair, 32 mm bore, brass chromium plated bottle traps for Wash basins and sink with inlet & outlet screwed for pipe or connections including necessary packing, union & cap & fixed complete all as specified and directed. |
| 73 | S&F in repair 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 74 | S&F in repair, Health Faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube & ABS wall hook including making connections & fixed in position complete all as specified and directed. |
| 75 | S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling complete all as specified and directed. |
| 76 | S&F in repair, Vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 77 | S&F in repair, plastic water closet seat cover, white, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 78 | S&F in repair, sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling and including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 79 | S&F in repair, 1 mm thick, stainless steel plate rack of overall size 24 inch x 36 inch x 10 inch including fixing with rawal plug and screws complete all as specified and directed. |
| 80 | S&F in repair, 10 litre capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 81 | S&F in repair, flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 82 | S&F in repair, 125 mm size, brass chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 83 | S&F in repair, PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 84 | S&F in repair, brass chromium plated, tubular towel rail, 20 mm dia, 'D' type, 60 cm long between flanges etc complete all as specified and directed. |
| 85 | S&F Brass CP Wall mixer three hole including provision of shower rose inlet 15 mm dia formixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 86 | S&F in repair, Brass chromium plated Basin Mixer with raised 'J' shaped swinging spout (Wall Mounted Model) with connecting legs & Wall flanges for 15 mm bore of pipe complete all as specified and directed. |
| 87 | S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 88 | S&F in repairs 600 mm x 450 mm looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood or PVC and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 89 | S&F in repair, toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 90 | Cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed. |
| 91 | M&L for PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specifed and directed |
| 92 | Taking down of eaves gutter, rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 93 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 94 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 95 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 96 | S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 97 | S&F 100 mm bore PVC (SWR) Branch pipe single, (Single Y) equal or unequal complete all as specified and directed. |
| 98 | S&F in repair, 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 99 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 100 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 101 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 102 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 103 | S&F 75 mm bore PVC (SWR) Branch pipe single, (Single Y) equal or unequal complete all as specified and directed. |
| 104 | S&F in repair, Stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, Including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed. |
| 105 | S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 106 | Taking down Chowkhats or frames not exc. 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed. |
| 107 | Taking down Chowkhats or frames exc 1.50 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 108 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specifed and directed |
| 109 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modules of elasticity 900 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia & length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note : For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e., depth & width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specifed and directed |
| 110 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant. fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer-in-Charge. |
| 111 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain Skeleton door shutter of size 30 mm thick including Supply and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature including aluminium grill of thickness 4 mm wire diameter to support wire mesh of apprroved pattern. WPC door comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibers (wood powder/rice husk/wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum & screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as per direction of Engineer-in-Charge. |
| 112 | S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube as specified & directed. |
| 113 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stile & rails with suitable PVC sheet beading & joined together with solvent cement specified and shown on drawing complete all as specified and directed. |
| 114 | S&F 125 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 115 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 116 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 117 | S&F 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 118 | S&F 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 119 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 120 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed complete all as specified and directed. |
| 121 | Taking down old wooden/wood based particle board complete all as specified and directed. |
| 122 | S&F 18/19 mm thick high density PVC solid fibre board duly one side with decorative type with decorative face veneer on one face, & other side balancing white lamination etc in kitchen cupboard etc. complete all as specified and directed. |
| 123 | S&F 18/19 mm thick high density PVC solid fibre board duly both side balancing white lamination etc in kitchen cupboard etc. complete all as specified and directed. |
| 124 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 125 | S&F mild steel conduit curtain rod with PVC coating fancy type curten rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 126 | S&F mild steel Bracket with PVC coating fancy type for curten rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 127 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm complete all as specified and directed. |
| 128 | S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed. |
| 129 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3 mm (+- 0.2 mm). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm). Sliding mesh Sash (42 mm x 57 mm), Sliding interlock (One vertical length in each shutters) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +– 0.2 mm thick, galvanized steel Frame (30 mm x 18 mm) 02 nos, sliding sash (30 mm x 18 mrn), sliding mesh sash (26 mm x 10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, [Hardware : Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40 mm & required accessories.] (Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.) (Area not exceeding 2.00 sqm each.) |
| 130 | S&F 4.8 mm thick sheet glass, ordinary quality, sheet glass is ground or obscured or frosted, on one side and glazing with oil putty in square but exc 0.5 sqm in each pane complete all as specified and directed. |
| 131 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows, ventilators & partitions including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 132 | S&F 3.0mm thick sheet glass, ordinary quality, sheet glass is ground or obscured or frosted, on one side and glazing with oil putty in square but n exc 0.5 sqm in each pane complete all as specified and directed. |
| 133 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in any type of soil etc complete all as specified and directed |
| 134 | Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in any type of soil complete all as specified and directed. |
| 135 | Removing excavated material exc. 50m but n exc. 250 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. |
| 136 | M&L for concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) complete all as specifed and directed |
| 137 | Demolition and breaking up drain pipe (SGSW, AC or RCC) of internal dia 150mm set in cement mortar complete all as specified and directed by Engr-in-Charge |
| 138 | M&L Salt-glazed stoneware drain pipes laid in trenches & jointed as specfified of 150mm dia complete all as specifed and directed |
| 139 | M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specifed and directed |
| 140 | S & F TMT bars 6 to 8 mm dia , cut to length, bent to shape as required incl cracking, bending spirally for hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed |
| 141 | M&L for cement concrete 1:4:8, type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specifed and directed |
| 142 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 100m or under, beyond the ead included in the rates, including loading, unloading and stacking at the destination Complete all as specifed and directed |
| 143 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, holders, pendants, regulators, sockets etc and making good disturbed surface by using cement mortar, white cement, putty etc and match with existing surfaces of walls, floors etc complete all as specified as directed. |
| 144 | Taking down carefully any type of old unserviceable submain wiring with PVC/steel conduit surface / concealed or wooden battens etc and making good the disturbed surfaces to match with the existing surface complete all as specified & directed by Engineer-in-Charge. |
| 145 | Taking down carefully any type of DBs including MCCBs and MCBs for keeping the old materials into safe custody or for taking credit(credit for above items should be made as per condition seaparately) and making godd to the disturbed surface etc complete all as specified and directed. |
| 146 | M&L for point wiring for One light point controlled by one switch 5/6 Amps complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be sone through proper size copper/brass thimbles. Where concealing of conduit is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed |
| 147 | All as per item No. 140 here-in-before but for one Ceiling fan/Exhaust fan Point controlled by one switch 5/6 Amps. |
| 148 | All as per item No. 140 here-in-before but for one Bell/buzzer Point controlled by one push button switch 5/6 Amps . |
| 149 | All as per item No. 140 here-in-before but for one socket point 5/6 Amp controlled by one switch on same board. |
| 150 | All as per item No. 140 here-in-before but for one socket point 5/6 Amp controlled by one switch on Independent board. |
| 151 | All as per item No. 140 here-in-before but for one light point controlled by two way switch. |
| 152 | All as per item No. 140 here-in-before but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp on Independent board complete all as specified & directed. |
| 153 | All as per item No. 140 here-in-before but with 1100 Volts grade copper stranded conductor FRLS cable of size 4 Sqmm main & with 4 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 5/15 Amp/Earth plug and socket for AC/Geyser point on Independent board complete all as specified & directed by Engineer-in-Charge. |
| 154 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 155 | Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, all as specified and as directed. NOTE : Two runs of 6 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables with MCBs or bus bar shall be done through appropriate size brass/ copper thimbles |
| 156 | S&F call bell multi music type suitable for AC 230 volt single pole complete all as specified & directed. |
| 157 | S&F Lamp holder, PVC/ polycarbonate type with back plate for angle holder all as per specified and directed. |
| 158 | S&F Ceiling rose surface type 60 x 30 mm three terminals of polycarbonate body complete all as specified & directed. |
| 159 | S&F modular switch 6 Amps one module 230 volts AC complete all as specified and as directed. |
| 160 | S&F modular switch 16 Amps one module 230 volts AC complete all as specified and as directed |
| 161 | S&F modular socket, 6A -2/3 pin combined 2 module,230 volts AC complete all as specified and as directed. |
| 162 | S&F modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC complete all as specified and as directed . |
| 163 | S&F modular bell push , 6 Amps, 1 module complete all as specified and as directed. |
| 164 | S&F modular switch two way AC 230 volts 6 Amps ,1 module complete all as specified and directed. |
| 165 | S&F modular fan regulator, 2 Module 4 step upto 180 W heavy duty 230 volts complete all as specified and as directed. |
| 166 | S&F modular cover plate 1 module including screws and washers etc complete all as specified and as directed. |
| 167 | S&F modular cover plate 2 module including screws and washers etc complete all as specified and as directed. |
| 168 | S&F modular cover plate 3 module including screws and washers etc complete all as specified and as directed. |
| 169 | S&F modular cover plate 8 module including screws and washers etc complete all as specified and as directed. |
| 170 | S&F modular cover plate 12 module including screws and washers etc complete all as specified and as directed. |
| 171 | S&F Metal flush box 1/2 module complete all as specified and directed. |
| 172 | S&F Metal flush box 3 module complete all as specified and directed |
| 173 | S&F Metal flush box 8 module complete all as specified and directed |
| 174 | S&F Metal flush box 12 module complete all as specified and directed |
| 175 | S & F in replacement sheet metal enclosure MCCB DB VTPN 4 Way vertical type 250 A Copper Busbar for each phase Fully insulated busbar & shrouded Neutral bars with provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing Reversible Door for IP 43 IK-09 DB's system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 176 | Supply and Fixing in replacement Sheet metal enclosure for DBs when MCBs to be Used, 8 way, SP & N, double door type, 240 Volt, including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. (Note : MCBs will be Measured separately) |
| 177 | Supply and Fixing MCCB, four pole, 100 Amp, 415 Volt, of breaking capacity 16 KA complete all as directed. |
| 178 | Supply and fixing in replacement 415V 10KA 'C' curve miniature circuit breaker (MCB), TPN, 63 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 179 | Supply and fixing in replacement 240V 10KA 'C' curve miniature circuit breaker (MCB), SPN, 40-63 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 180 | Supply and fixing in replacement 240V 10KA 'C' curve miniature circuit breaker (MCB), SP, 6-32 Amps current carrying capacity in the DB complete with connection, testing and commissioning, all as specified and directed. |
| 181 | Supply & Fixing in replacement Smart bright Batten Series, LED luminaire using LEDs 20 watt min 120 LM/watt, natural white(4000K)/ cool white (6500k), with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification complete all as specified and directed. |
| 182 | Supply and fix in replacement LED bulk head luminaires,9 watts (600-900 lumens) lamp,IP 65/66 with fittings, connecting cable PVC insulated and PVC sheathed copper flxible cable of size 16/ 0.20 mm with necessary fixing arrangments complete all as specified and directed. |
| 183 | S & F in replacement LED Mirror light fitting 2 ft tube light, 10 watt aluminum housing and integrated electronic driver complete with fixing arrangements on wall complete all as specified and directed. |
| 184 | Supply & fix in replacement of LED Security Light Luminaire 35 watt with 2500 or more lumen cool day ligh with, surge protection device upto 4KV, IP65 or more, IK07 or more, potted driver suitable for 180 to 270 V, 50 Hz, light engine driver base.pole adapter, powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole/wall fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. |
| 185 | S&F LED Bulb 5 star, 230V AC, 9 watt cool day light B-22, Correlated Colour Temperature 6500k as per the direction complete all as specified and directed by Engineer-in -charge. |
| 186 | S&F in replacement decorative wall light fitting made up of Polycarbonate, Cylindrical shape or as per the sample required/obtained from the site and mounting arrangement to fix the lamp and all as directed by Engr-in-Charge with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. |
| 187 | Taking down ceiling fan/exhaust fan sealing cable end, dismantling blades and removing fan and blades to store complete all as specified by Engr in charge |
| 188 | M & L for Hanging only ceiling fan/exhaust fan and connecting up including provision of flexible cable from ceiling rose or connector to fan Including hook and clamps with nut ,bolts, washers etc complete all as specified and directed |
| 189 | M & L for painting of ceilling fan/exhaust fan of any make/model and size complete with one coat of 1st grade quality of synthetic white enamelled paint by spraying including preparation of old paianted surface to remove all dust, oil mark etc and filling cavaties with filler materials, before painting, complete writing the MES numbers on ceiling fan with flack synthetic enamel paint of 1st grade quality by stenciling with uniform size of letters/of figures n.exc 20 mm in height letters/figures to be written in each fan complete all as spedified and directed. |
| 190 | Taking down of electric meter of any type and any capacity and refixing of the same on an old location with complete connections all as specified by Engr in charge |
| 191 | Taking down of geyser of any type and any capacity and refixing of the same on an old location with complete fittings such as cold and hot water connection pipes and accessories all as specified by Engr in charge |
| 192 | M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire |
| 193 | M & L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type B1 using 20mm graded stone aggregate with angle iron CI frame 40X40X5mm , CI cover with provision of locking arrangement complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete including taking out the old one complete all as specified and directed by Engr-in-Charge. including necessary excavation and earthwork in any type of strata and testing complete including fill up the earth pit with soil for best result and removal. Note :- (i) Earth protection pipe & earthing wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor (ii) If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.. |
| 194 | Taking up or down 25mm dia steel tubing in trench/ wall with connection including cleaning for removal all as specified and directed.. |
| 195 | M&L for 25mm diar GI tubing medium grade with all fittings laid in trenches/wall completed all as specified and directed. |
| 196 | Supply and fix Gun metal, globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge. |
| 197 | M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge. |
| 198 | Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground water pipe line/cable complete with all accessories all as specified and directed by Engineer-in-charge. |
| 199 | Removing excavated materials n.exc 50m and depositing were directed at a level n.exc. 1.5m above the starting level |
| 200 | M&L for sand cushioning in cable trenches over & under the cable, with river washed coarse sand, as per standard practice with proper compaction complete all as specified and directed by Engr-in-Charge. (Punned thickness 18 cm shall be considered for payment as per para 19.75 of SSR Part-I) |
| 201 | M & L for Fly Ash bricks Sub-class 'B' locally available laid flat in trenches over sand cushioning for cable protection complete all as speciffied and directed. |
| 202 | Supply and fixing 40 mm dia GI tubing medium grade ISI marked fixing to pole with suitable clamps / laid under floor/road for protection of cable including complete all as specified and directed. |
| 203 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core all fixing and connecting accessories such as cable lugs, cable glands, nut, bolts, complete all as specified and as directed. |
| 204 | Schedule of credit amount of Rs 53,436.80 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 21, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 03, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysDec 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender