Tender For Repair To Wooden And Steel Furniture At Icgs Tuticorin Under Ge(I) (Cg) Chennai.
Tender Value
4.95 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
15 days left
EMD
9900
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wooden And Steel Furniture At Icgs Tuticorin Under Ge(I) (Cg) Chennai.
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH LARGE STEEL, FD-1031 |
| 2 | Removing unserviceable door shutter carefully by unriveting the hinges and Supply and Fix new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge and painting with two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer complete all as directed and shown on drawing. |
| 3 | Removing unserviceable lock from shutters of almirah large steel and Supply and Fix new 6 lever lock with duplicate keys complete all as directed and shown on drawing. |
| 4 | Removing unserviceable handle from almirah steel large and Supply and Fix new 130mm long chromium plated handle to steel shutters complete all as directed and shown on drawing |
| 5 | Removing unserviceable/damaged shelf carefully by removing the rivets and welding spots, Supply and Fix new shelf made of 1 mm thick MS sheet of same size and shape complete all as directed and shown on drawing. |
| 6 | Removing unserviceable/damaged bottom portion carefully by removing rivets and welding spots and Supply and Fix new bottom made of 1 mm thick MS sheet of same size and shape by welding complete all as directed and shown on drawing. |
| 7 | Removing unserviceable leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts.Supply and Fix new leg made of 1mm thick MS sheet to the existing place through welding and riveting complete all as directed and shown on drawing. |
| 8 | Spot gas welding and filing of welded surfaces complete all as directed and shown on drawing. |
| 9 | Material and labour for painting each Almirah steel large by peeling out the old paint by applying paint remover solution, filling cavities and uneven surfaces with metal putty, sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying Two coats of synthetic synthetic enamel paint as per existing shade externally and internally to complete almirah all as specified and as directed.Note: The painting to each article shall only be carried out by spray machine only. |
| 10 | ALMIRAH STEEL MEDIUM WITH SHELVES, FD-1032 / 243 |
| 11 | Removing unserviceable door shutter carefully by unriveting the hinges and Supply and Fix new door shutter made of 1 mm thick MS sheet of same size and shape duly fixed to almirah large steel with new 80mm long MS hinge complete all as directed and shown on drawing. |
| 12 | Removing unserviceable lock from shutters of almirah large steel and Supply and Fix new 6 lever lock with duplicate keys complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 13 | Removing unserviceable handle from the almirah steel large and Supply and Fix new 130mm long chromium plated handle to steel shutters complete all as directed and shown on drawing |
| 14 | Removing unserviceable/damaged shelf carefully by removing the rivets and welding spots and Supply and Fix new shelf made of 1 mm thick MS sheet of same size and shape complete all as directed and shown on drawing. |
| 15 | Removing unserviceable/damaged bottom portion carefully by removing rivets and welding spots and Supply and Fix new bottom made of 1 mm thick MS sheet of same size and shape complete all as directed and shown on drawing. |
| 16 | Removing unserviceable leg from bottom of almirah carefully by unriveting and using hand held cutting machine without damaging the other parts and Supply and Fix new leg made of 1mm thick MS sheet to the existing place through welding and riveting complete all as directed and shown on drawing. |
| 17 | Material and labour for painting each Almirah steel medium by peeling out the old paint by applying paint remover solution, filling cavities and uneven surfaces with metal putty, sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying Two coats of synthetic synthetic enamel paint as per existing shade externally and internally to complete almirah all as specified and as directed.Note: The painting to each article shall only be carried out by spray machine only. |
| 18 | BED STEEL WITH PLY TOP (FD/E6/MAP/08®) |
| 19 | Removing the old unserviceable PVC Shoe and Supply and Fix New PVC Shoe complete all as Specified and as directed. |
| 20 | Supply and fix Head board made of 18mm thick prelaminated MDF board with 2mm thick teakwood beading alround its edges duly fixed with suitable wooden screw complete including taking down existing unserviceable head board complete all as specified and as directed. |
| 21 | Supply and fix Foot board made of 18mm thick prelaminated MDF board with 2mm thick teakwood beading alround its edges duly fixed with suitable wooden screw including taking down existing unserviceable foot board complete all as specified and as directed. |
| 22 | Supply and fix Top of 12mm thick Plywood BWR grade -AA duly fixed with 12 x Nos of 50mm long 8mm dia flat head nut , bolts and washers taking down existing unserviceable top complete all as specified and as directed. |
| 23 | Material and labour for painting exposed steel surfaces of each Bed steel by peeling out the old paint by applying paint remover solution, filling the cavities and uneven surfaces with metal putty, sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying two coats of synthetic enamel paint as per existing shade to Bed steel complete all as Specified and as directed..Note : The painting to each article shall only be carried out by spray machine only. |
| 24 | CHAIR CBA SPECIAL SEEL WITH HAND REST , FD 120 (M) |
| 25 | Scratching the entire frame of chair and applying one coat of synthetic synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper complete all as specified and as directed. |
| 26 | Remvoing the old unserviceable and broken MS flat and supply and fix MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat complete and painting with two coats of synthetic enamel paint over a coat of red oxide primet complete all as specified and as directed. |
| 27 | Remvoing the old unserviceable seat and Supply and Fix seat made of teak wood duly polished in natural shade duly canning with 1.8 mm plastic cane and border with 3.5 mm plastic cane in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and as directed. |
| 28 | Remvoing the old unserviceable back and Supply and Fix back made of teak wood duly polished in natural shade duly canning with 1.8 mm plastic cane and border with 3.5 mm plastic cane in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and as directed. |
| 29 | Removing the old unserviceable Spl Hand Rest and supply and fixing new Spl Hand Rest made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 30 | Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg. Complete all as specified and as directed. |
| 31 | Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg. Complete all as specified and as directed. |
| 32 | CHAIR CB STEEL WITH ARM:FD-75(M) |
| 33 | Scratching the entire frame of chair and applying one coat of synthetic synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper complete all as specified and as directed. |
| 34 | Remvoing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 35 | Remvoing the old unserviceable seat and Supply and Fix seat made of teak wood duly polished in natural shade duly canning with 1.8 mm plastic cane and border with 3.5 mm plastic cane in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and as directed. |
| 36 | Remvoing the old unserviceable back and Supply and Fix back made of teak wood duly polished in natural shade duly canning with 1.8 mm plastic cane and border with 3.5 mm plastic cane in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and as directed. |
| 37 | Removing the old unserviceable arm and supply and fixing new arm made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 38 | Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg complete all as specified and as directed. |
| 39 | Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg complete all as specified and as directed. |
| 40 | CHAIR CB STEEL WITHOUT ARM: FD-75(M) |
| 41 | Scratching the entire frame of chair and applying one coat of synthetic synthetic enamel paint after preparation of surfaces complete all as specified and as directed. |
| 42 | Removing the old unserviceable and broken MS flat and supply and fixing MS flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat and painting with two coats of synthetic enamel paint over a coat of red o;xide primer complete all as specified and as directed. |
| 43 | Remvoing the old unserviceable seat and Supply and Fix seat made of teak wood duly polished in natural shade duly canning with 1.8 mm plastic cane and border with 3.5 mm plastic cane in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and as directed. |
| 44 | Remvoing the old unserviceable back and Supply and Fix back made of teak wood duly polished in natural shade duly canning with 1.8 mm plastic cane and border with 3.5 mm plastic cane in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm complete all as specified and as directed. |
| 45 | Removing the old unserviceable Hard rubber shoes and supply and fixing new Hard rubber shoes as per drg complete all as specified and as directed. |
| 46 | Removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg complete all as specified and as directed. |
| 47 | CHAIR DINING, FD-228 / FD/MAP/05 |
| 48 | Removing the old unserviceable Back rest and supply and fixing new back rest made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 49 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 50 | Removing the old unserviceable front leg and supply and fixing new front leg made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 51 | Removing the old unserviceable rear leg and supply and fixing new rear leg made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 52 | Removing the old unserviceable rail and supply and fixing new rail made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 53 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. |
| 54 | Removing the existing unserviceable PVC seat, supply and fix new PVC Seat as shown on drgs complete all as specified and as directed. |
| 55 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos brackets (01 No to each leg and rail) with adhesive and headless nails icluding polishing complete all as specified and as directed. |
| 56 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as specified and as directed. |
| 57 | CHAIR EASY,FD-229,358 :- |
| 58 | Removing the old unserviceable rear leg and supply and fixing new rear leg made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 59 | Removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drgand polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 60 | Removing the old unserviceable rail and supply and fixing new rail made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 61 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 62 | Removing the old unserviceable Back rest and supply and fixing new back rest made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 63 | Removing the old unserviceable arm and supply and fixing new arm made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 64 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat and back shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. |
| 65 | Supply of wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos brackets (01 No to each leg and rail) with adhesive and headless nails icluding polishing complete all as specified and as directed. |
| 66 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as specified and as directed. |
| 67 | CHAIR COMPUTER/CHAIR EXECUTIVE HIGH/LOW BACK, TP, FD/E6/MAP/01 |
| 68 | Removing the existing torn out tapestry cloth, pressed foam cushion, elastic webbing tape, PVC lipping from seat and back by unscrewing the seat and back from frame of chair carefully and Supply and Fix new seat and back made by using 60mm thick 40 density foam sheets, new webbing tape, new PVC lipping duly covered with new tapestry cloth of approved colour and texture of rate not less than Rs.500 per mtr and fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.Note : The seat and back shall be covered with plastic transparent film. |
| 69 | Removing the existing torn out tapsetry cloth from seat and back of chair carefully after removing the PVC lipping and Supply and Fix new tapestry cloth of approved colour and texture to seat and back of chair along with PVC lipping to restore the chair in original shape, the rate of cloth shall not be less than 500 per mtr and fixing of cloth shall be done by using heavy duty gun tacker complete all as specified and as directed.Note : The seat and back shall be covered with plastic transparent film. |
| 70 | Removing old unserviceable arm rest of chair and Supply and Fix new arm of same shape and size made of black integral skin polyurethane with 75-85 shore 'A' hardness & reinforced with MS insert complete all as specified and directed.Note : Set of two arm rest shall be measured and paid as one unit (i.e Set ot Two) |
| 71 | Removing unserviceable castor twin wheels and Supply and Fix new castor twin wheel suitable for chair computer complete all as specified and as directed. |
| 72 | Removing unserviceable 5 spokes stainless steel adjustable pedestal assembly and Supply and Fix new 5 spokes stainless steel adjustable pedestal assembly to chair computer all as specified and directed. |
| 73 | Removing unserviceable hydraulic gas lift cylinder of chair and Supply and Fix new hydraulic gas lift cylinder to chair complete all as directed and as shown on drawing. |
| 74 | Painting to all steel portion of chair computer with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper, making surface neat and smooth etc., complete all as specified and as directed. |
| 75 | CHAIR WRITING,FD-251 |
| 76 | Removing the old unserviceable Back rest and supply and fixing new back rest made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 77 | Removing the old unserviceable leg stiffener and supply and fixing new leg stiffener made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 78 | Removing the old unserviceable front leg and supply and fixing new front leg made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 79 | Removing the old unserviceable rear leg and supply and fixing new rear leg made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 80 | Removing the old unserviceable rail and supply and fixing new rail made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 81 | Removing the old unserviceable arm and supply and fixing new arm made out of 1st class teak wood as per drg and polished with french polish to give a glossy apperance etc., complete all as specified and as directed. |
| 82 | Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm wide cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs. |
| 83 | Supply and fix wooden brackets made to shape in size 3\\"x 3\\" of thickness 25mm and fixing 08 x Nos brackets Note : 01 No to each leg and rail shall be fixed. |
| 84 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as directed and shown on drawing. |
| 85 | CHARPOY GI PIPE WITH PLY TOP,FD-220/220(R) |
| 86 | Taking out existing unserviceable /broken plywood from the charpoy GI pipe by unscrewing nut, bolt, washer and flat iron. Tightening each part of the entire frame of charpoy by using pipe wrench and Supply and fix new 12mm thick plywood BWR grade-AA made of wood and other lignocellulosic products conforming to IS-303 of size 1980mm x 900mm fixed over the GI pipe frame and fixing 3 components(i.e- ply, flat iron and rail) with new GI nylon insert nut, bolt and washers 8mm dia 62 to 65mm long as directed by Engr-in Charge and all as specified. |
| 87 | SOFA SET 5 SEATER/3 SEATER/2 SEATER SINGLE SEATER FD-258/373 |
| 88 | Taking out old pressed /torn cushions from each set and Supply of 40 density, 100mm thick PU foam cushion of size 520mmx560mmx100mm duly covered with inner linen cloth and best tapestry cloth not less than Rs 400 per metre of approved color and shade. Each cushion cover shall be provided with best quality polyester zipper stitched on one edge of cushion cover covered under the flap of cloth with standard fitting.Tapestry cloth:- It shall be heavy linen look fabric, plain velvet fabric or as per approved sample placed in BSO yard .Make of Foam 40 density-Kurlon-goldline plus/Sleepwell-primo/U-foam |
| 89 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two r more coats of french polish to achieve glossy finish etc., complete all as directed and shown on drawing. |
| 90 | CHAIR VERANDAH:- FD-256 |
| 91 | Removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick complete all as specified and shown on drawing.Note : (i) The canning shall only be done after painting the chair.(ii) Painting to Chair verandah shall be measured and paid separately. |
| 92 | Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair complete all as directed and shown on drawing |
| 93 | Painting the frame of the chairs by applying two coats of synthetic enamel white of approved quality paint including prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The chair frame shall be made smooth by applying metal putty wherever required etc., complete all as directed and shown on drawing. |
| 94 | TABLE OFFICE CLERK STEEL,FD-84(M)/1004 |
| 95 | Removing unserviceable top carefully and Supply and Fix new top of size 1200mmx610mm made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails etc., complete all as directed and shown on drawing. |
| 96 | Removing the existing unservicable /rusted drawer and Supply and Fix new drawer made out of 1mm thcik MS sheet as per size and dimension with 100 mm long chrome plated handle fixed at front complete all as directed and shown on drawing. |
| 97 | Removing unserviceable lock from drawers and shutters and Supply and Fix new 6 lever lock with duplicate keys complete all as directed and shown on drawing.Make of Locks-Godrej/Harrison/Link |
| 98 | Removing the old broken PVC shoes from the legs of table and Supply and Fix new PVC shoes of size 25mmx25mm having metal washers fitted inside at bottom complete all as directed and shown on drawing. |
| 99 | Painting the frame of the table by two coats of synthetic enamel white of approved quality paint including prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.The frame shall be made smooth by applying metal putty wherever required complete all as directed and shown on drawing. |
| 100 | TABLE PEG, FD-277 / 384 |
| 101 | Removing unserviceable top carefully and Supply and Fix new Top of size 450mmx300mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as directed and shown on drawing. |
| 102 | Removing unserviceable leg of Table Peg and supply and fix new Legs of size 362mmx30mmx50mm made out of 1st class teak wood including polishing with french polish as per drg Complete all as directed and shown on drawing. |
| 103 | Removing unserviceableTop long rail of Table Peg and supply and fix new Top long rail of size 450mmx20mmx40mm made out of 1st class teak wood including polishing with french polish as per drg Complete all as directed and shown on drawing. |
| 104 | Removing unserviceable Bottom side rail of of Table Peg and supply and fix new Bottom side rail of size 300mmx20mmx40mm made out of 1st class teak wood including polishing with french polish as per drg Complete all as directed and shown on drawing. |
| 105 | Removing unserviceable Bottom Stiffener and supply and fix new Bottom Stiffener of size 450mm x 20mmx 40mm in between two short stiffeners irrespective of what is shown in drg, made out of 1st class teak wood including polishing with french polish as per drg Complete all as directed and shown on drawing. |
| 106 | Removing unserviceable Corner shape wooden bracket and supply and fix new Corner shape wooden bracket of size 75mmx75mmx20mm, fixed to legs and rail with adhesive and screws complete all as directed and shown on drawing |
| 107 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as directed and shown on drawing. |
| 108 | TABLE CENTRE, FD-274 |
| 109 | Removing unserviceable Top and supply and fix new Top of size 900mmx450mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood complete all as directed and shown on drawing. |
| 110 | Removing unserviceable Legs and supply and fix new legs of size 400mmx30mmx60mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as directed and shown on drawing |
| 111 | Removing unserviceable Top long rail and supply and fix new Top long rail of size 900mmx20mmx50mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 112 | Removing unserviceable Top short rail and supply and fix new Top short rail of size 450mmx20mmx 50mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 113 | Removing unserviceable Bottom Rail and supply and fix new Bottom rail of size 450mmx20mmx50mm Short Stiffener made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 114 | Removing unserviceable Centre stiffener and supply and fix new Centre stiffener of size 900mm x 20mm x 50mm in between bottom rail irrespective of what is shown in drg, made out of 1st class teak wood including polishing with french polish etc., complete all as directed and shown on drawing. |
| 115 | Removing unserviceable Corner shape wooden bracket and supply and fix new Corner shape wooden bracket of size 75mmx75mmx20mm, fixed to legs and rail with adhesive and screws complete all as directed and shown on drawing. |
| 116 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as directed and shown on drawing |
| 117 | TEAPOY WOODEN,FD-232 |
| 118 | Removing unserviceable Top of Teapoy and supply and fix new Top of size 600mm x 450mm made out of 18mm thick prelaminated MDF board exterior grade as per existing shade with edges duly covered with 4 mm thick beading of teak wood etc., complete all as directed and shown on drawing. |
| 119 | Removing unserviceable Legs and supply and fix new Legs of size 520mm x 60mm x 30mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 120 | Removing unserviceable Top long rail and supply and fix new Top long rail of size 600mmx 50mm x 20mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 121 | Removing unserviceable Bottom rail and supply and fix new Bottom rail of size 450mm x 50mm x 20mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 122 | Removing unserviceable Long Stiffener and supply and fix new Long Stiffener of size 600mm x 20mm x 50mm made outof 1st class teak wood, fixed in between two bottom rails irrespective of what is shown in drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 123 | Removing unserviceable Corner shape wooden bracket and supply and fix new Corner shape wooden bracket of size 75mm x 75mm x 20mm thick, fixed to legs and rail with adhesive and screws complete all as directed and shown on drawing. |
| 124 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as directed and shown on drawing. |
| 125 | TABLE WRITING:- FD- 275 |
| 126 | Removing unserviceable Top and supply and fix new Top of size 1145mm x 600mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood etc., complete all as directed and shown on drawing |
| 127 | Removing unserviceable Top Long rail and supply and fix new Top Long rail of size 740mmx25mmx 50mm made out of 1st class teak wood as per drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 128 | Removing unserviceable Top Short rail and supply and fix new Top Short rail of size 600mmx25mmx 50mm made out of 1st class teak wood as per drg including polishing with french polish etc., complete all as directed and shown on drawing. |
| 129 | Removing unserviceable Back ply and supply and fix new Back ply of size 596mmx400mm made of 6mm plywood as per drg etc., complete all as directed and shown on drawing |
| 130 | Removing unserviceable Bottom stiffener and supply and fix new Bottom stiffener of size 1145mmx25mmx 50mm made out of 1st class teak wood. fixed in between two short stiffeners irrespective of what is shown in drg including polishing with french polish etc., complete all as specified and as directed. |
| 131 | Removing unserviceable Sides of compartment and supply and fix new Sides of compartment of size 592mmx600mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak wood etc., complete all as directed and shown on drawing. |
| 132 | Removing unserviceable Shutter of compartment and supply and fix new Shutter of compartment of size 490mmx370 made out of 18mm thick prelaminated MDF board exterior grade, natural teak color duly fixed with piano hinges and edges duly covered with 4mm thick teak wood beading by using 100mm long stainless steel hinge etc., complete all as directed and shown on drawing. |
| 133 | Removing unserviceable Front face of drawers and supply and fix new Front face of drawers of size 120mmx370mm made out of 18mm thick prelaminated MDF board exterior grade of existing shade with edges duly covered with 4 mm thick beading of teak woodetc., complete all as directed and shown on drawing. |
| 134 | Removing unserviceable Bottom ply of drawers and supply and fix new Bottom ply of drawers of size 370mmx540mm made out of 6mm plywood BWR fixed to side ply in groove as shown in drg etc., complete all as directed and shown on drawing |
| 135 | Removing unserviceable Sides of drawers and supply and fix new Sides of drawers of size 120mmx540mm made out of 12mm thick BWR plywood with edges duly covered with 4 mm thick beading of teak wood etc., complete all as directed and shown on drawing. |
| 136 | Removing unserviceable Legs and supply and fix new Legs of size 740mmx35mmx 55mm made out of 1st class teak wood as per drg including polishing with french polish etc., complete all as specified and as directed. |
| 137 | Removing unserviceable handle and supply and fix new Handle of size 100mm long chrome plated etc.,complete all as directed and shown on drawing |
| 138 | Removing unserviceable Corner shape wooden bracket and supply and fix new Corner shape wooden bracket of size 100mmx100mmx25mm thick fixed to legs and rail with adhesive and screws etc., complete all as directed and shown on drawing. |
| 139 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as directed and shown on drawing. |
| 140 | TABLE DINING FOR 6 PERSONS:-FD-239 |
| 141 | Removing unserviceable Top and supply and fix new Top of size 1500mmx900mm made out of 18mm thick prelaminated MDF board exterior grade, natural teak color, edges duly covered with 4 mm thick beading of teak wood etc., complete all as directed and shown on drawing. |
| 142 | Removing unserviceable Legs and supply and fix new Legs of size 760mmx40mmx75mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as specified and as directed. |
| 143 | Removing unserviceable Top long rail and supply and fix new Top long rail of size 1500mmx25mmx100mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as specified and as directed. |
| 144 | Removing unserviceable Top short rail and supply and fix new Top short rail of size 900mmx25mm x100mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as specified and as directed. |
| 145 | Removing unserviceable Top centre stiffener and supply and fix new Top centre stiffener of size 900mmx25mmx100mm made out of 1st class teak wood as per size on drg including polishing with french polish etc., complete all as specified and as directed. |
| 146 | Removing unserviceable Corner Shape wooden bracket and supply and fix new Corner Shape wooden bracket of size 100mmx100mmx25mm thick. fixed to legs and rail with adhesive and screws etc., complete all as directed and shown on drawing |
| 147 | Scratching & making the entire wooden surface of item with sand emery paper making surface smooth by applying wood filler, rubbing and dusting the surface with clean muslin cloth and applying two or more coats of french polish to achieve glossy finish etc., complete all as directed and shown on drawing |
| 148 | TABLE COMPUTER ,TP, FD/E6/MAP/03 |
| 149 | Removing unserviceable top from table steel carefully and Supply and Fix new top of size 900mmx560mm made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails etc., complete all as directed and shown on drawing. |
| 150 | Removing the existing unservicable key board of table computer by removing the unserviceable telescopic channel and supply and fix key board attached with new telescopic channel made out of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nail etc., complete all as directed and shown on drawing. |
| 151 | Removing the existing unservicable mouse pad board complete from Table computer and supply and fix new mouse pad tray 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails etc., complete all as directed and shown on drawing. |
| 152 | Removing the existing unservicable CPU stand part complete from Table computer and supply and fix new CPU stand made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails etc., complete all as directed and shown on drawing. |
| 153 | Removing unserviceable/damaged drawer complete from Table computer and supply and fix new drawer made of 18mm thick prelaminated MDF board exterior grade both side laminated with same shade duly providing 4mm thick teak wood edging all around fixed with adhesive and headless nails.The drawer shall be provided with decorative knob etc., complete all as directed and shown on drawing. |
| 154 | Material and labour for preparation of the old painted steel surfaces by scraping with emery paper and applying one coat of synthetic enamel paint of white colour of approved quality complete all as specified as directed. |
| 155 | TABLE BED SIDE (MAP) ,FD/E6/MAP/15(R) |
| 156 | Removing unserviceable Top of Table bed side and Supply and Fix new top with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges etc., complete all as specified and as shown on drawing. |
| 157 | Removing unserviceable side boards of Table bed side and Supply and Fix new sides with teak wood beading made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thickteak wood beading at all edges etc., complete all as specified and as shown on drawing. |
| 158 | Removing unserviceable Upper drawer and Supply and Fix new Upper drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges etc., complete all as specified and as shown on drawing |
| 159 | Removing unserviceable Back ply of Table bed side and Supply and fix new Back ply 6mm BWR grade etc., complete all as directed and shown on drawing |
| 160 | Removing unserviceable lower drawer and Supply and fix new lower drawer made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade with bottom of 6mm BWR plywood including 4mm thick teak wood beading at all edges etc., complete all as specified and as shown on drawing. |
| 161 | Removing unserviceable top upper back and Supply and fix new top upper back made out of 18mm thick pre-laminated MDF board [ISI Marked] exterior grade including 4mm thick teak wood beading at all edges etc., complete all as specified and as shown on drawing. |
| 162 | Removing unserviceable handles and Supply and fix new handles 75mm long chrome plated of dia 8mm fixed with suitable screws etc., complete all as directed and shown on drawing. |
| 163 | Painting to steel frame of table bed side steel with one coat of synthetic enamel paint of existing color after cleaning, dusting and scratching the iron surface with sand emery paper etc., complete all as directed and shown on drawing. |
| 164 | SIDE RACK WITH 3 SPACES STEEL, FD-1023 |
| 165 | Material and labour for painting each Rack by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying Two coats of synthetic enamel paint paint as per existing shade, applied externally and internally to complete Rack all as specified and as directed. Note: The painting to each article shall only be carried out by spray machine only. |
| 166 | RACK STEEL ADJUSTABLE 6 tier, FD-106 |
| 167 | Material and labour for painting each Rack by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying Two coats of synthetic enamel paint paint as per existing shade externally and internally to complete Rack all as specified and as directed. Note: The painting to each article shall only be carried out by spray machine only. |
| 168 | Material and labour for painting to articles of steel furniture by adhering to following steps:-a) The existing surface of each steel article shall be made smooth by peeling out the old paint by applying paint remover solution, filling metal putty to the uneven surfaces and sanding it again to make the surface smooth then wipe out the surface and remove the dust with a fine cloth and applying Two coats of synthetic enamel paint as per existing shade in each item externally and internally to each article after applying and drying one coat of metal primer complete all as specified and as directed. b) The painting to each article shall only be carried out by spray machine only.c) The work will be excecuted at various units locations/residential accn or inside/outside restricted area as per user requirement. |
| 169 | Almirah MAP Steel, FD-83 |
| 170 | Bench Workshop 1800x900x760mm, FD-1024 |
| 171 | Book Case steel with glass door, FD-1028, TP |
| 172 | Book Shelf Steel Open Large |
| 173 | Cabinet Steel Filling 4 Drawer |
| 174 | Combined Tray 2 spaces with pigion hole, DB-10077 |
| 175 | Locker Bed Side, FD-222 |
| 176 | Rack Adjustable 6 Tier FD-106 |
| 177 | Rack Stationary Steel FD-81 (M) |
| 178 | Stool Steel 305 x 305 x 610mm, FD-81 (M) |
| 179 | CHARPOY GI WITH NYLON NEWAR:-FD-220The following work shall be carried out at centralised unit location:- |
| 180 | Taking out existing unserviceable plastic/nylon newar from the frame of charpoy GI pipe, Tightening each part of the entire frame of charpoy by using pipe wrench, Supply and fix of 02 Nos MS flat Iron of size 32mm x 5 mm duly painted in black colour of length equal to width of plywood/GI charpoy, Drilling holes 02 Nos each in long rails, 02 Nos each in short rails & 01 No on both flat iron at centre and and fixing new 12mm thick BWR plywood ISI marked of grade AA made of wood and other lignocellulosic products conforming to IS-303 of size 1980mm x 900mm fixed over the GI pipe frame by fixing 3 components(i.e- ply, flat iron and rail) with nylon inserts lock nut and flat head bolt of length 70 to 75mm and dia 8mm with washers as directed by GE/Engineer-in Charge. Makes of Ply Wood:-Kitply /Century Plywood/ Mysore Chip Board, Mysore/ Green Ply /Anchor/ Archid Ply/ Bhuttan Tuff India / Swastik/ Indian Plywood/ Punjab Plywood Industries/ Jain Wood Industries (JAYNA) |
| 181 | Removing existing unserviceable/short lengthed long rail of charpoy GI Pipe and Supply and fix new medium grade GI pipe long rail of length 1890mm having internal dia not less than 32mm, confirming to IS-1239 and bear ISI mark including threading at both ends upto 22mm complete all as specified and as directed.Make of GI Pipe- TATA/Jindal/Prakash Surya. |
| 182 | Material and Labour for making Short Rail out of unserviceable long rails retrieved from Sr Item No 25.02 after cutting the broken ends threads and making new threads on both ends upto 22mm and fixing the same to charpoy GI pipe.The complete length of each short rail including threading should be 810mm etc., complete all as specified and shown on drawing. |
| 183 | Material and Labour for making Leg out of unserviceable short rails retrieved from Sr Item No 25.03 after cutting the broken ends threads and making new threads on one end only upto 22mm and fixing hard wood plug on other end made out of 35mmx35mmx40mm with height 15mm. The length of each leg including threading and excluding wooden plug should be 380mm etc., complete all as specified and shown on drawing. |
| 184 | Removing existing unserviceable / short lengthed LEG from the charpoy by unscrewing, Supply and fix new medium grade GI pipe leg of length 380mm having internal dia not less than 32mm, confirming to IS-1239 and bear ISI mark including threading at one end upto 22mm and fixing hard wood plug on other end made out of 35mmx35mmx40mm with height 15mm etc.,complete all as specified and shown on drawing.Make of GI Pipe- TATA/Jindal/Prakash Surya. |
| 185 | Removing existing unserviceable/broken three way 32mm dia GI Elbow from charpoy GI Pipe by unscrewing and Supply and fix new three way GI Elbow for 32 mm internal dia GI pipe duly ISI marked etc., complete all as specified and shown on drawing. |
| 186 | Removing existing unserviceable/broken 32mm dia GI checknut from charpoy GI Pipe by unscrewing and Supply and fix new GI checknut suitable for 32mm internal dia GI pipe having thickness not less than 3mm ISI marked etc, complete all as specified and shown on drawing. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender