Tender For Repair, Maintenance Of Ppr Pipe Lines, Ppr Sockets, Gi Sockets, Cleaning Of Chocked Pipe Lines And Its Connected Works In The Aor Of Age E/M Under Ge 873 Ews
Tender Value
49 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
17 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Leh → Ladakh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair, Maintenance Of Ppr Pipe Lines, Ppr Sockets, Gi Sockets, Cleaning Of Chocked Pipe Lines And Its Connected Works In The Aor Of Age E/M Under Ge 873 Ews
BOQ
| Sl. No. | Item Description |
| 1 | M&L for disconnecting electrical/ mechanical connection and taking out submersible pump set 5 HP to 10 HP from existing bore well approx depth varying from 50 m to 150 m with all accessories and transporting to authorized workshop for rewinding and overhauling of sumbermersible pump and after overhauling / rewinding, re-lowering the pump set in bore well with all accessories, including making connection with existing starter and testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed.Note: Defective major components/spares if required to be replaced shall be measured as supply only under respective item here-in-after and labour element included in item No 1 for replacement of major spares/components. |
| 2 | Supply only motor Shaft rubber bush. |
| 3 | Supply only Stainless steel Coupling wth key for pump shaft |
| 4 | Supply only Thrust plate with bearing |
| 5 | Supply only Neck ring. |
| 6 | Supply only Impeller distance bush. |
| 7 | Supply only pump shaft |
| 8 | Supply only S/S Impeller with key |
| 9 | Supply only CI intermediate /suction/discharge case |
| 10 | Supply only Bush Stainless steel for impeller. |
| 11 | Supply only GM Bush for motor shaft |
| 12 | Supply only Sand guard. |
| 13 | Supply only MS/ SS flanged/threaded Nipple 50 mm dia |
| 14 | Rewinding of 3 Phase, 5/7.5 HP submersible electric motor with PVC insulated copper winding wire of same gauge including impregnated paper, sleevs, lathorised fibre glass, and tape, etc complete all as specified and directed. |
| 15 | Dismantling centrifugal monoblock pumping set of 03 HP to 05 HP capacity and transporting to authorized workshop for rewinding and replacement of UNSV/worn out spare parts and re-assembling the pump sets and fixing on its original position, testing for smooth functioning complete all as specified and directed.Note: Defective major components/spares if required to be replaced shall be measured as supply only under respective item here-in-after and labour element included in item No 2 for replacement of major spares/components. |
| 16 | Supply only bearing DE/NDE |
| 17 | Supply only stainless steel / CI impeller |
| 18 | Supply only shaft for pump stainless steel. |
| 19 | Supply only shaft sleeves for pumps. |
| 20 | Supply only air vent valve brass. |
| 21 | S&F in replacement 200 mm dia borewell cap made of 3 mm thick MS sheet complete all as specified and directed. |
| 22 | S& F in replacement MS 65 mm dia pipe MS Clamp 8mm thick - 2 nos, pumpset jointing MS coupler & bend etc complete all as specified and directed. |
| 23 | S& F in replacement MS 50 mm dia pipe MS Clamp 8mm thick - 2 nos, pumpset jointing MS coupler & bend etc complete all as specified and directed. |
| 24 | S& F in replacement heavy duty MS reducer nipple 65 x 50 mm dia i.e one side outer threaded 50mm dia and one side 4 hole MS flange suitable for 50 mm dia pipe complete all as specified and directed. |
| 25 | S& F in replacement heavy duty MS nipple 50 mm dia i.e one side outer threaded 50mm dia and one side 4 hole MS flange suitable for 50 mm dia pipe complete all as specified and directed. |
| 26 | S& F in replacement heavy duty 50 mm dia both side flange GI/MS Bend 90 degree complete all as specified and directed. |
| 27 | M&L for disconnecting electrical/ mechanical connection and taking out submersible pump set 5 HP to 10 HP from existing bore well approx depth varying from 50 m to 150 m with all accessories for Development of tube well with air compressor and re-lowering the pump set in bore well with all accessories, and making connection with existing starter and testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 28 | M&L for disconnecting electrical/ mechanical connection and taking out submersible pump set 5 HP to 10 HP from existing bore well approx depth varying from 50 m to 150 m with all accessories for Development of tube well with air compressor and re-lowering the pump set in bore well with all accessories, and making connection with existing starter and testing to ensure efficient and smooth functioning to obtain required discharge, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender