Tender For Repair And Maintanance Of Gasifier Crematorium At Thiruneermalai Road Ward 51 Tambaram City Municipal Corporation
Tender Value
29 Lakhs
Estimated cost
Bid Submission
30 Nov 2026
13 days left
EMD
29000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chengalpattu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintanance Of Gasifier Crematorium At Thiruneermalai Road Ward 51 Tambaram City Municipal Corporation
BOQ
| Sl. No. | Item Description |
| 1 | Engaging Earth moving machnaries for cleaning the site including hire charges fuel charges operator wages etc complete JCB |
| 2 | Removal of debries and excess cutting earth including all lbour charges conveyance charges etc complete |
| 3 | Engaging fo manual labours for cleaning of toilets removal of RCC Jollys and out side of buildings including wages and others etc complete |
| 4 | Earth work excavation in all Classes of soil except sand and rock such as hard clay black cotton shales murrums hard red earth grvelly sosil etc with all lead and lift and depositing on banks as per SS 20 B etc completelead |
| 5 | Plain cement concrete 1:5:10 mix using 40mm HBG ISS meatal including cost and conveyance of all materials and including all labour charges etc complete |
| 6 | Brick work in following Cement Mortar using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing,etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge. |
| 7 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means |
| 8 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 9 | Plastering with Cement Mortar 1:3 (One cement and Five Plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 10 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 11 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. officers. |
| 12 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 13 | UPVC Window Specification: Supplying and fixing UPVC(Un-Plasticized Polyvinyl Chloride) Windows of casementtype (open) from the profile the size of outer frame60mm x 58mm and shutter profile are reinforcement withGI/1mm 125GSM and 100% corrosion free, the profilesare multi chambered sections with wall thick of 2mm.The EPDM rubber (black colour) covered with over all theedges of frame and shutter the shutter will be providedwith Espag multi power point locks and also it operatesas handle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or brown colourglass 4mm thick should be provided to the shutter and itshould not allow leakage of water even at most rangingstorms and should have key lockable action, securityprotective hinges, strong locking systems and as persize for arresting noise and energy loss. The connectingmechanism between sash and outer frame that enablesopening of the window. The window should be fixedto the wall with 100% packing with screws and siliconpacking all round the frames. The window should be gotapproved from the Executive Engineer before use on work |
| 14 | Dadooing walls with fDadooing with granite tiles of synthetic grey, paradise, and similar/other varieties of suitable conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 15 | Supplying, erecting and Fixing precast reinforcement bench with back rest. Bench shall consist of 2 nos. L shaped bases support in natural cement color of thickness 100mm, back height 1000mm, front height 450mm,base width 620mm and 5Nos Reinforced Concrete planks in red color and size of 1500x100x50mm and 1no. reinforced concrete plank of 150x200x50mm: manufactured by using M-30 grade concrete & reinforcedsuitably: all parts to be joined with galvanized nuts and bolts of suitable size.HC-W0327 |
| 16 | Flooring with ceramic tiles of a. Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmsize and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 17 | Supply & fixing of WPC door shutter, extruded asa single core board with rigid WPC compound withthe thickness of 25mm (+/- 1mm) & minimum BulkDensity of 550 KG/Cub.Mt. & shore hardness of 55.The door shall be a plain matt board as decidedby the Engineer in-Charge of the department. TheWPC door shall be fixed onto the Aluminium “G”type channel with Wheel and the door shall have2 Hooks in SS, 2 Handles 4” in SS (Sliding door)etc., complete and as directed by the departmentalofficers. |
| 18 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 19 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 20 | Removal and Relaying of Interlocking Paver Block Stone 63mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers. |
| 21 | Dismantling the existing brick walls in cement mortor including all labour cahrges etc complete |
| 22 | Supply and planting of Hibiscus hybrid flowering shrub variety of height 30-45 cm in polythene bag of size 8x10 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed bythe site in- charge HC -W0055 |
| 23 | Supply and planting of Ficus starlight ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges,transportation, stacking of saplings at site,earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.HC -W0049 |
| 24 | Supply and planting of Dypsis lutescens (Areca palm) palm variety of height 180-210 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casuarina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplingsat site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.HC -W0146 |
| 25 | Supply and planting of Travellers Palm ornamental foliage Specimen plant variety of height 105-120 cm in polythene bag of size 16x16 inch including loading and unloadingcharges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge..HC -W0158 |
| 26 | Supply and planting of Poovarasu tree sapling of height 180-240 Cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.HC -W0209 |
| 27 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) sd 271 |
| 28 | Supply and run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 1.5 sq.mm copper wire with painting of suitable colour Sd 54 |
| 29 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Lower End) complete with TW round blockson wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fittin SD 442 |
| 30 | Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads withMS clamps and with painting . SD 458 |
| 31 | Supply and fixing of 1200mm (48\\") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp Sd 110 |
| 32 | LPG burner sets with LPG bank and control panel supply of 4Nos burners with blower and fully auto control system. LPG fired ignition, flame sensor and auto cut offimcorporated in a separate controller equivalent to imported control system for air and LPG with auto ignition system Jand supply of 20+20 cylinder bank with pipeline from LPG cylinder back upto each burner end by using TATA; Cclass prade matverial nine. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender