Defence Statutory Bodies & Commissions/Committees Closing in 21 days TDR #58491480

Tender For Addition/Alteration Of Or Md Accn And Allied Works At Mil Stn Dharamshala Under Ge Palampur.

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
1.14 Crore
Estimated cost
Bid Submission
09 Dec 2026
21 days left
EMD
1.89 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Addition/Alteration Of Or Md Accn And Allied Works At Mil Stn Dharamshala Under Ge Palampur.

BOQ

Name of Work:- ADDN/ALTN OF OR MD ACCN AND ALLIED WORKS AT MIL STN DHARAMSHALA UNDER GE PALAMPUR.
Sl. No. Item Description
1Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal all rubbish material complete all as specified and directed.
2Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided and removal of debris to out side Mil Stn, complete all as specified and directed.
3Demolition of brick work/ block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and including removal of debris to out side Mil Stn, complete all as specified and directed.
4Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc including removal of debris to out side Mil Stn, complete all as specified and directed.
5Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
6Taking up or down steel tubing and connections of 15 mm bore, including cleaning and stacking safe custudy for refixing, or removal to store complete all as specified and directed.
7Taking up or down steel tubing and connections of 20 mm bore, including cleaning and stacking safe custudy for refixing, or removal to store complete all as specified and directed.
8Dismantling PVC water tank of capacity Exc 250 Litre and not Exceeding 500 Ltr complete all as specified and directed.
9Taking down chowkat with shutter n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
10Taking down chowkhats or frames area exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
11M&L for 25 mm thick PCC 1:2:4, type B-0 using 12.5 mm graded crushed aggregates as in floor finish even and rough to receive topping layer all as specified and directed.
12M&L for plain cement concrete (1:3:6) type C1 (20mm graded stone aggregate), 75mm thick as in plinth protection courses laid in slope 1:20, top surface of concrete finished even and smooth without using extra cement, incl expansion joint 10mm thick filled with mastic filling comprising of 01 part of heated blown bitumen-85/25 and 03 parts of sand incl demolition of existing cement concrete incl disposal of demolition material upto MD land complete all as specified and directed by Engr-in-Charge.
13M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base, complete all as specified.
14M&L for providing precast cement concrete type A1 1:1.5:3 (using 20mm graded stone aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed.
15S&F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
16M&L for cement concrete PCC 1:2:4 type B-0, using 12.5mm graded in roof kerbs or mud stops, rounded or chamfered on edges incl demolition and necessary formwork and removal all rubbish material complete all as specified and directed.
17M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6.0 mtr mean radius, built in CM 1:6, complete all as specified and directed .
18M&L for walling of random rubble stone masonry uncoursed, brought up to course with best quality locally available harder stones such as granite, trap, basalt stone etc. well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.
19All as per srl item No. 18.00 here-in-above but except stone.Note: Old stone obtained against demolition shall be used.
20M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bond stone, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straight or curved) complete all as specified & directed.
21Extra over stone walling for hammer dressing in granite, trap or besalt stone, and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm, complete all as specified and as directed.
22M&L for raised pointing to squared rubble stone masonry,un-courses or brought upto course in cement mortar 1:4 complete all as specified and directed.
23M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, incl 15 mm screed bed in CM 1:6, complete all as specified and directed.
24M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, incl 15 mm screed bed in CM 1:6, complete all as specified and directed..
25M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm,as in skirting etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, incl rendering 10 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado incl dismantling wall tiles complete all as specified and directed.
26M&L for machine cut Kota stone slab flooring 16-18 mm thick over cement screed bed laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including and polishing complete over and including 20 mm screed in cement mortar 1: 4 complete all as specified and directed.
27M&L for machine cut Kota stone slab flooring 16-18 mm thick riser of step, skirting, dado and piller laid over and including 10 mm thick randering in 1:3 on fair faces of brick or concrete surfaces finishing rough for receiving wall tiles complete all as specified and directed.
28M&L for 16-18 mm thick black Granite work (table rubbed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed by the Engr-in-Charge.
29M&L for providing edge moulding to 16-18mm thick granite/kota stone of counters vanities, steps etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.
30Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises . M & L for coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 300X 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match to match the surface of tile incl rendering 10 mm thick in cement mortar 1:3 on fair faces of brick or concrete surfaces finished even and rough for receiving wall tiles/dado complete all as specified and directed.
31M&L for prepolish coloured chequered cement concrete tiles 30cmx30cmx20-25mm thick, with white cement and pigments set, jointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified & directed.
32M&L for Rendering cement plaster 10mm thick on concrete surfaces of ceiling in CM 1:3, finished even and smooth without using extra cement incl taking down plaster on cement or cement lime plaster,any description, scrubbing down with water, and removal of debris to out side Mil Stn, complete all as specified and directed.
33M&L for Rendering cement plaster 15mm thick in CM 1:3 in fascia/edges/ceiling and roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finished even and smooth without using extra cement and removal of debris to out side Mil Stn, complete all as specified and directed.
34M&L for Rendering cement plaster 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement incl taking down plaster on cement or cement lime plaster,any description, including raking out joints, hacking for key, scrubbing down with water and removal of debris to out side Mil Stn, complete all as specified and directed.
35M&L for Rendering cement plaster 15 mm thick on fair faces of brick work or concrete surface in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed.
36M&L for Rendering cement plaster 15mm thick in cement mortar 1:4 on other than fair faces of concrete and brick surfaces, mixed with WPC as per manifacturure instructions and finished even and fair without using extra cement incl taking down plaster on cement or cement lime plaster,any description, including raking out joints, hacking for key, scrubbing down with water and removal of debris to out side Mil Stn, complete all as specified and directed.
37M&L for Rough cast plaster 20mm thick in two layer under layer 10mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 10mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 6m nominal size) incl taking down plaster on cement or cement lime plaster,any description, including raking out joints, hacking for key, scrubbing down with water and removal of debris to out side Mil Stn complete all as specified.
38Supply of integral water proofing compound
39S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfast incl PCC 1:3:6 type C-O using 12.5mm graded stone agg for back filling of frame, etc. complete all as specified and directed.
40S&F pressed steel frames of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfas incl PCC 1:3:6 type C-O using 12.5mm graded stone agg for back filling of frame, etc. complete all as specified and directed.
41S&F pressed steel frames of 75x50mm for cupboard with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfas incl PCC 1:3:6 type C-O using 12.5mm graded stone agg for back filling of frame, etc. complete all as specified and directed.
42Making good dismantled portion for inserting hold fasts in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. Please Enable Macros to View BoQ information
43Making good dismantled portion for inserting hold fasts in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58491480
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 1.14 Crore
LAST DATE 09-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Addition/Alteration Of Or Md Accn And Allied Works At Mil Stn Dharamshala Under Ge Palampur.
Basic Detail
Tender No CWE/Y-71/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 11 Nov 2026
Submission Date 09 Dec 2026
Open Date 16 Dec 2026
Finance
Tender Value 1.14 Crore
Tender Fee 1000
EMD 1.89 Lakhs
Exemption Available
Document List
BOQ_895437.xls
ca2ae565-5caa-418f-8cf4-b0a2b2abf557.html
E-tender71.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 09, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 21 days
Dec 16, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 28 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_895437.xls

html

ca2ae565-5caa-418f-8cf4-b0a2b2abf557.html

pdf

E-tender71.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender