Defence Statutory Bodies & Commissions/Committees Closing in 15 days TDR #58491403

Tender For Repair /Replacement And Maintenance To Building Works, Wooden And Aluminium Works, Wall Panelling And Misc Works Related Works Of B/R Works Of Age B/R -I Under Ge 865 Ews.

Issued by Statutory Bodies & Commissions/Committees · leh, Ladakh
Tender Value
45.50 Lakhs
Estimated cost
Bid Submission
03 Dec 2026
15 days left
EMD
91000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
leh → Ladakh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Repair /Replacement And Maintenance To Building Works, Wooden And Aluminium Works, Wall Panelling And Misc Works Related Works Of B/R Works Of Age B/R -I Under Ge 865 Ews.

BOQ

Name of Work:- REPAIR /REPLACEMENT AND MAINT TO BUILDING WORKS, WOODEN AND ALUMINIUM WORKS, WALL PANELLING AND MISC WORKS RELATED WORKS OF B/R WORKS OF AGE B/R -I UNDER GE 865 EWS.
Sl. No. Item Description
1Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each, complete all as specified and as directed.
2Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed.
3Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each, complete all as specified and as directed.
4All as per item No. 3 here-in-before but n exc 1.0 sqm.
5Taking down shutters of any description area not exceeding 1 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete, complete all as specified and as directed.
6Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each,resecuring or easing & adjusting and refixing in the same opening, complete all as specified and as directed.
7S & F anodised aluminium frame of standerd section for doors, windows, ventilators with double rebates including joining cleat for fixing etc., complete all as specified and as directed.
8M&L for Powder coated aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified
9M&L for Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) (Glass / Wiremesh should be measured seperately), complete all as specified and as directed.
10Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixings lugs, excluding hinges,lock strike plate,etc and fixed, complete all as specified and as directed.
11S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately), complete all as specified and as directed.
12Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.
13S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165, complete all as specified and as directed.
14Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast bed block and like including dismantling of any description, complete all as specified and as directed.
15S&F for 30 mm thick 2nd class soft wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats, complete all as specified and as directed.
16S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides, supply and fixed to chowkats, complete all as specified and as directed.
17S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc. (Glass / Wiremesh should be measured seperately), complete all as specified and as directed.
18Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads, complete all as specified and as directed.
19M&L sheet glass 4.8 mm thick ordinalry quality and glazing with wooden beads in square not exc 0.50 sqm in each pane, complete all as specified and as directed.
20M&L sheet glass 3mm thick ordinalry quality and glazing with wooden beads in square not exc 0.50 sqm in each pane, complete all as specified and as directed.
21S&F in repair Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.
22S&F mild steel butt hinges, medium weight cold rolled 100mm size, complete all as specified and as directed.
23S&F mild steel butt hinges, medium weight cold rolled 75mm size, complete all as specified and as directed.
24S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed.
25S&F 100mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed.
26S&F stainless steel butt hinges, medium weight cold rolled 100mm size, complete all as specified and as directed.
27S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and as directed.
28S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized, complete all as specified and as directed.
29S&F in 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed, complete all as specified and as directed.
30S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg, complete all as specified and as directed.
31M & L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.
32S & F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed, complete all as specified and as directed.
33S & F brass mortice lock 4 levers (Harrison) vertical type size 100 mm or above in old or new position, complete all as specified and as directed.
34S & F Harrison rails, anodised aluminium alloy with fixing brackets, stops rollers in repair etc complete all as specified.
35S&F in repair 19mm dia mild steel, chromium plated curtain rods, with brackets, end bulbs, complete all as specified and as directed.
36S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.
37M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section including dismantlng, complete all as specified and as directed.
38M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section including dismantlng, complete all as specified and as directed.
39M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including dismantlng, complete all as specified and as directed.
40M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work, including dismantlng, complete all as specified and as directed.
41All as per item No. 40 here-in-before but item no 40 but on ceiling including dismantlng, complete all as specified and as directed.
42M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng, complete all as specified and as directed.
43All as per item No. 42 here-in-before item no 43 but on ceiling including dismantlng, complete all as specified and as directed.
44M&L for not less than 15mm thick wooden battens of 100mm wide fixed each other with male and female grooves fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng, complete all as specified and as directed.
45Ditto as above Item no 45 but on ceiling including dismantlng, complete all as specified and as directed.
46M&L French polishing on wood or wood based surface of any width or girth or any description,including cleaning and preparing the surface including a coat of wood filler o new surface with two or more coats, complete all as specified and as directed.
47M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture including dismantlng, complete all as specified and as directed.
48S & F anodised aluminium snap grid of size 605 x 605 frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long, complete all as specified and as directed.
49M & L providing and fixing Gypsum board 12mm thick and 600 x 600 mm in size in ceiling fixed with screw or with staples on snap grid as per manufactured instructions including dismantlng, complete all as specified and as directed.
50M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed.
51M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed
52Deduct Schedule of Credit of Rs (-) 68714.50 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58491403
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 45.50 Lakhs
LAST DATE 03-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Repair /Replacement And Maintenance To Building Works, Wooden And Aluminium Works, Wall Panelling And Misc Works Related Works Of B/R Works Of Age B/R -I Under Ge 865 Ews.
Basic Detail
Tender No 865/EWS(NIT-140/2026-27
Bidding Type Tender
Location
City leh
State Ladakh
Key Dates
Publish Date 11 Nov 2026
Submission Date 03 Dec 2026
Open Date 11 Dec 2026
Finance
Tender Value 45.50 Lakhs
Tender Fee 500
EMD 91000
Exemption Available
Document List
19694d31-753b-4307-a33a-c6617a98113c.html
BOQ_895277.xls
TENDERNIT_140.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 03, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 11, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 23 days

Tender Documents

Download All (ZIP) ↓
html

19694d31-753b-4307-a33a-c6617a98113c.html

xls

BOQ_895277.xls

pdf

TENDERNIT_140.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender