Tender For Nctps- I - Se/M-I Circle - Aoh (26-27) - Mpm Dn. - Unit Ii - Mills 2B & 2D - Dismantling And Lowering Of Mdvs, Mpos, Mill Outlet Elbows And Classifier Blades, Patch Welding In Worn Out Portion And Dismantling Of Centre Coal Feed Pipe Type
Tender Overview
Project Description
Tender for Nctps- I - Se/M-I Circle - Aoh (26-27) - Mpm Dn. - Unit Ii - Mills 2B & 2D - Dismantling And Lowering Of Mdvs, Mpos, Mill Outlet Elbows And Classifier Blades, Patch Welding In Worn Out Portion And Dismantling Of Centre Coal Feed Pipe Type I, Ii & Ss Chute, Venturi Assembly, Re-Fixing New/Rectified Centre Coal Feed Pipes I, Ii & Ss Chute & Classifier Assembly, Rectification Of Venturi Assembly During Annual Overhaul For The Year 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and lowering of 1 No. MDV to mill floor at 2.52 Mtrs. For inspection of internal and lifting of either new or repaired or modified one no. MDV to position and coupling with coal pipe and releasing of supports including patch welding. cost of consumables and T&P's. |
| 2 | Dismantling and lowering of 1 No. MPO to mill floor at 2.52 Mtrs. For inspection of internal and renewing the worn-out components if necessary and lifting of either new or repaired MPO to the position and coupling with mill discharge valve. cost of consumables and T&P's |
| 3 | Charges for dismantling the old worn out orifices on mill top assembling of new/old Orifice including hard facing positioning, cost of consumables and T&P's. |
| 4 | Charges for arresting the coal pipe firmly, dismantling Victaulic coupling and lowering down the mill outlet elbows to 4.5 m. floor including charges for scaffolding, cost of consumables and T&P's. |
| 5 | Charges for inspection of mill outlet elbows and changing the deflector block if any lifting the elbows and assembling with proper alignment with the existing pipe line and removing coal pipe supports and devolution of scraps to stores, including cost of consumables and T&P's. |
| 6 | Reconditioning of worn out defective centre coal feed pipe style I, II & SS chute - Cutting and removing the worn-out portions from the released centre coal feed pipe TYPE-I & II and joining together the usable portions by welding and make them as TYPE -I, II & SS Chute suitably as per site requirement, devoluting to stores, Fabrication and machining of M.S Flange dia 620mm X 20mm thick. aligning, edge preparation and welding with pipe.(Necessary Pipe (Type -I/II) for rectification will be supplied by TNPGCL and the remaining pipe after rectification will be devoluted to the stores), including cost of consumables and T&P's. |
| 7 | Charges for dismantling venturi outlet assembly from mill top with the removal of venturi outlet, venturi vanes, venturi outlet conical collar assembly, coal feed pipe and devolution of scrap to stores including cost of consumables and T&P's. |
| 8 | Charges for fixing of new venturi vane, patch welding and assembling the venturi outlet assembly, venturi outlet conical collar assembly with coal feed pipe and the mill top including cost of consumables and T&P's. |
| 9 | Dismantling of worn out classifier assembly, inspection of deflector blade, cleaning, replacing of worn out deflector blade components renewal and assembling of new classifier assembly with its links. The overhauled classifier assembly was checked from 0 to 6 positions and ensured that the deflector blades, links move correspondingly to its position without any malfunction, including cost of consumables and T&P's. |
| 10 | Overhauling of Classifier System by removal of Classifier spherical bearing links, Overhauling and retapping the sockets, replacing of worn out studs and nuts and synchronising the operation of Classifier Control Vanes Inner and Outer of the mill, including cost of consumables and T&P's. |
| 11 | Charges for Dismantling of separator body top along with classifier assembly and reassembling the separator body top as per direction of engineer in charge. This includes making the fixture for lifting arrangements, lead, lift retaping and cleaning the threaded holes in the flange etc. including cost of consumables and T&P's. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender