Public Administrative Department Local Bodies Closing in 10 days TDR #58491103

Tender For Providing Park At Arasi Nagar Ward No:2, Survey No.273/1, 273/1A In Aravakurichi Town Panchayat, Karur District.

Issued by Local Bodies · Karur, Tamil Nadu
Tender Value
54 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
10 days left
EMD
54000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Karur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Park At Arasi Nagar Ward No:2, Survey No.273/1, 273/1A In Aravakurichi Town Panchayat, Karur District.

BOQ

Name of Work:- Providing Park at Arasi Nagar Ward No:2, Survey No.273/1, 273/1A in Aravakurichi Town Panchayat, Karur District.
Sl. No. Item Description
1Supplying and fixing RCC Precast post of size 0.12x0.12x2.40m including chain link 50x50mm Using 10 gauge galvanused Iron Wire etc., Complete
2Earth Work Excavation for Foundation in all types of soils and sub soils to full depth (such as Soils in Rock / Silt / Light Black Cotton Soil / Ordinary Soil ) except in rock requiring blasting but inclusive of shoring, shuttering and bailing out water wherever necessary and refilling the sides of foundation with excavated earth other than sand in layers of 150 mm thick well rammed and consolidated, depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 m and initial lift of 2 m. Complete as per TNSS 23 & 24, V, VI (S2), VII, 9,10
3Plain Cement Concrete of mix 1:5:10 (One Cement Five Sand Ten Aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.
4Supplying and Errecting Steel Centering including necessary supports for plain surfaces for Reinforced Cement Concrete works such as Coloumn footing,Coloumn pedestals,plith beams, grade beams,staircase steps,etc which requires only nominal strutting using mild steel sheetsof size 90mm x60mm and 10Bg stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervels etc complete in all floors Complying with standard Specification without Strutting. ( TNSS NO or NBC No 30(S) 86 86 A V, VI(S3)VII
5Below Ground Level
6Column
7Ground Floor
8Reinforced Cement Concrete 1 : 11/2 : 3 (One Cement One Point Five Sand Three Aggregates) using 20mm gauge hard Granite broken stone jelly including cost curing, etc., complete as per standard specification and as directed by Engineer incharge.
9Supplying and Fabricating and placing in position mild steel of ribbed for steel bars for all R.C.C. works including bending, cranking binding etc., including cost of binding wire M.S. chairs laps to fix the reinforcement in all position all lasour and materials etc. Complete complying with standard Specification.
10Brickwork in following Cement Mortar 1:5 (One Cement and Five Sand) using best quality of Fly Ash Bricks 230x110x75mm from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications
11Plastering in C.M. 1 : 5 to (One Cement, Five Sand) 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.
12Placing and Fixing of Steel Doors and Window with Grill including all cost of material and Labour including all incidental charges etc., complete complying with standard Specifications.
13Plasticized Polyvinyl Chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash shold be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extructed seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handless, licks should be designed so that they cannot be released from outside. Glazing: The window system should be
14Supplying and Painting the walls with Two Coats Colour Cement Paint over one coat of cement primer as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.)
15Painting New Iron Works such as Steel Doors, Windows, Ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
16Plain Cement Concrete of mix 1 : 2: 4 (One Cement Two sand Four Aggregates) using 20mm gauge hard broken including cost conveyance of all materials to site including formwork and centering labour charges, transporting and placing in position including shoring, strutting, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.
17Providing and Laying, Spreading and compacting graded stone aggregates to Wet Mix Macadam specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying inuniform layers with paver sin Sub Base/Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
18Providing and Laying of 63mm thick High Strength Type conforming IS 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.-10 Sqm paver Block rate PWD SOR Page No; 35
19Manufacturing Supply and Erection of Four Seated See - Saw of size 2.10 Mt long and 1.5Mt width supporting with 35mm dia of C.R. pipe of \\"B\\" class thickness and 4 Nos. of seat arrangements, one safety back rest up & down movement will controlled by heavy duty bearing mounting including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete
20Manufacturing Supply and Erection of FRP Double Slide of Sliding Lengh 2.1 Heigh 1.82m & width 508 mm made of 63.5mm, 55mm, 35mm, 25mm B Class CR pipe, the sliding area made by S.S sheet 2 Nos. including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., complete
21Manufacturing Supply and Ereciton of Four Seated Swing made of 50mm, 63.50mm S.S. Pipe. Dimensions Hight 3.048 meter, Length 6.096 meters. Tested Bearing supported molded chains with attractive colors. Seating arrangments made by GI sheet including one coat of anit rust expoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp including one coat of anti rust epoxy primer and two coat of multicolor epoxy coating for glazy finish with foundation clamp etc., completed
22Jungle Gym - Feb of 1\\" GI Pipe 4 length X 4' wide and 7' height including cost and convence of all materials and labour charge etc., complete.
23Supply and Fixing in Position of Terracotta Jally 50mm tk including errecting centering for Sides and Soffits and conveyance of all material to site and all other labour charges for fixing etc., Complete.
24Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm \\"P\\" or \\"S\\" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..
25Special Ceiling Plastering in C.M. 1 : 3 (One Cement, Three Sand) to 10 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.
26Flooring with Ceramic Tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
27Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
28Weathering Course in Brick Jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime ( no sand to be used ) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design , slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime Jaggery water etc,. complete as per standard specification and as directed by the Engineer incharge
29Finishing The Top of Roof with One Course of Machine Pressed Tiles of Size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
30Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100V grade in cuitable PVC rigid pipe concealed in wall and Ceiling with PVC accessoires in flush with wall with 3mm thick Hylum Sheet cover with TW Switch box and 5A F.T. Switch and making good of the Concealed portion with suitable colour for PVC CONCEALED LIGHT POINT/FAN POINT (for Electronics Regulator) (SD NO: 25)
31Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated SC Unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and Ceiling with PVC accessoires in Flush with wall 150mm x 100mm x 113mm TW Switch box with 3mm thick Hylum sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of 14SWG TC wire and making good of the Concealed portion with suitable colour for CONCEALED PVC PLUG POINT (SD NO: 36)
32Supply and Run of 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in 25mm dia GI Pipe(Class B) suitably bent at both ends with necessary angle iron upright and end supports for mains on 7/20 GI bearer wire for Service connection mains(SD. NO 67)
33Supply and Fixing of Fancy Glass Shade and 11W CFL including all cost and conveyance to site etc complete. (SD NO: 80)
34Supply and Fixing of 4'40W Twin Street Light Fluorescent Fitting complete with copper choke and condensor with 19mm dia GI pipe (Class 'B') with 1 No. 19mm GI bend complete on the existing post / wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads with MS clarnps and aluminium painting with fluorescent tubes including all cost and conveyance to site etc complete. (SD NO: 94)
35Supply and Fixing of TNEB meter Board suitable for 32A Single Phase Service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper Flat) on TW Plank of Size 375mm x 300mm x 19mm with Supporting TW Reepers of 1\\" thick an either side with Painting with Suitable bolt and nuts for fixing the TW Plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB Meter to Fuse Unit (SD No :125)
36Supply and Fixing of Following PVC and GI Pipes and Specials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. etc.,
37110mm PVC Pipe
38110mm PVC Elbow
39110mm PVC Tee
4032mm PVC Pipe
4132mm PVC Coupling
4232mm PVC Elbow
4332mm PVC Tee
4432mm GM Gate Value
45HDPE Tank 1000 Ltr ISI/ISO
4632mm PVC Nipple 150mm
4732mm x 15mm PVC Reducer
4815mm GI Tap
49Submersible Pumpset 2 HP
50Panel Board
514 Sqmm Copper Cable
5240mm UPVC Pipe
5332mm GI Pipe \\"B\\" Class
5432mm GI Elbow
5532mm GI Coupling
5632mm GI Non Return Valve
5732mm GI Union
5820mm GI Tape
5920mm GI Pipe \\"B\\" Class
60Bore Cover
61Bore Clampset
6240mm PVC Pipe
6316 Amps Main Switch
647/20 Wire
65Supplying, erecting and Fixing precast reinforcement bench with back rest. Bench shall consist of 2 nos. L shaped bases support in natural cement color of thickness 100mm, back height 1000mm, front height 450mm, base width 620mm and 5Nos Reinforced Concrete planks in red color and size of 1500x100x50mm and 1no. reinforced concrete plank of 150x200x50mm: manufactured by using M-30 grade concrete & reinforced suitably: all parts to be joined with galvanized nuts and bolts of suitable size.
66Providing Stainless Steel Dustbin in various places on walking track with all necessary accessories etc., complete as directed by the departmental officers.
67Supply and fixing of 65mm (2-1/2\\")GI pipe (Class 'B' of 6 metre length with 300mmx300mmx 6mm MS baseplate dulywelded at the bottom with concreting with construction of masonary pedestal with suitable MSbox to house 5A control switch 16A fuse unit (500V) etc with suitable angle iron frame work with door and with lock and key arrangements and with supply and fixing of 4'40W twin street light fluorescent fitting with copper chokes and condenser with fluorescent tubes with 1 metre of 32mm dia GIpipe(Class 'B')complete with necessary clamps on the above post with PVC unsheathed FRLS leads with painting of suitable colour
68Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .
69Earthing as per PWD standard with an earth electrode of 2 metre Class 'B'GI pipe of dia not less than 32mm complete with necessary masonry work
70Supply and Erection of 4x6 Sqmm UG Copper Cable including cost and conveyance of all materials and labour charge etc., complete.
71Supply and Erection of 2x10 Sqmm UG Copper Cable including cost and conveyance of all materials and labour charge etc., complete.
72Supply and Fixing of Horizontal type 4 way Triple Pole neutral MCB distribution board in sheet steel enclosureDouble door(Metal) with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make) SD 179
73Provision for Geo Physical survey charges for identifying the bore point etc., complete.
74Drilling 150 mm Dia bore well in allurial soil or segmentary starate using not by rig by first drilling a pilot bore of 115 mm dia direct rotary mud circulation method, using contractors rig tools fuel labour for drilling, bentonite Labour drilling at the site shown by the department officers.
75Supply, Delivery and Fixing of 180mm Dia PVC casing Pipe for in position including cost of all materials and labour charges etc., complete.
76Lowering PVC rigid/ HDPE pipes and specials to trench and laying to proper grade and alignment jointing with PVC couplers with cement paste and testing to the required pressure including conveyance of water for filling during testing.
77Supply and Fixing of 50mm thick Precast Slab including cost and conveyance of all materials and all labor charges etc,
78Labour Charges for Erection of Submersible pumpset and errection of Panel Board in Position etc, Complete Complying with Standard Specifications.
79Supply and Fixing of Panel Board Cover including cost and conveyance of all materials and all labour charges etc,
80Supply and Planting Boarder plant 6m intervels zig zag wise Includung all labour chargesetc completed (Vembu,Pungam etc) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58491103
AUTHORITY Local Bodies
TENDER VALUE 54 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Town Panchayats
Work Description Tender for Providing Park At Arasi Nagar Ward No:2, Survey No.273/1, 273/1A In Aravakurichi Town Panchayat, Karur District.
Basic Detail
Tender No 213/2026
Bidding Type Tender
Location
City Karur
State Tamil Nadu
Key Dates
Publish Date 12 Nov 2026
Submission Date 27 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 54 Lakhs
Tender Fee Ref. Documents
EMD 54000
Exemption Not Available
Document List
3a26265f-852a-4d7f-9094-fac684be4705.html
BOQ_870466.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 10 days

Tender Documents

Download All (ZIP) ↓
html

3a26265f-852a-4d7f-9094-fac684be4705.html

xls

BOQ_870466.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender