Tender For Construction Of Anganwadi At Pillur Adi Dravidar Area
Tender Value
13 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
9 days left
EMD
13000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Villupuram → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Anganwadi At Pillur Adi Dravidar Area
BOQ
| Sl. No. | Item Description |
| 1 | Name of work : Construction of Anganwadi building at Pillur Panchayat |
| 2 | Earth work Excavation and depositing on bank with initial lead and lift in all classes of soil except hard rock requiring blasting including all labour charges etc.,complete for foundation |
| 3 | Refilling the excavated earth other then sand including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 4 | Supplying and Filling foundation and basement with good M Sand in layers not more than 15cm . Thick well ramed, watered and compacted Complete complying with stanard specification. |
| 5 | Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed. |
| 6 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x41/4\\"x23/4\\" including cost and conveyance of all materials to site and all labour charges etc complete (Below Basement) |
| 7 | Brick work in cement mortar 1:5 mix using country bricks 83/4\\"x41/4\\"x23/4\\" including cost and conveyance of all materials to site and all labour charges etc complete (Above Basement) |
| 8 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). |
| 9 | Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). |
| 10 | Sunshade |
| 11 | Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification. |
| 12 | Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications. |
| 13 | Providing granolithic flooring with CC 1:2:4 mix 25 mm thick including cost and conveyance of all materials to site and all labour charges etc complete |
| 14 | Paving the floor with Vertified tiles of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 15 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data) |
| 16 | Dadooing of walls with colour glazed tiles of size300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete. |
| 17 | Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required size |
| 18 | Finishing the top of the roof with one course of Machine Pressed Tiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification |
| 19 | Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work). |
| 20 | Plastering with CM 1:5,12mm thick including cost and conveyance of all materials to site and all labour charges etc.,complete |
| 21 | Distempering two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete |
| 22 | Exterior emulsion two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete |
| 23 | Supply and fixing of mild Steel Doors of any size with standard specification including cost and conveyance of all materials and all labour charges etc complete. |
| 24 | Supply and fixing of mild Steel Doors of any size with standard specification including cost and conveyance of all materials and all labour charges etc complete. |
| 25 | Supply and fixing of mild Steel Windows of any size with standard specification including cost and conveyance of all materials and all labour charges etc complete. |
| 26 | Supply and fixing of mild Steel Ventilator of any size with standard specification including cost and conveyance of all materials and all labour charges etc complete. |
| 27 | Painting two coats over new iron works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete |
| 28 | Cost, supply and fixing of Cuddappah slab 38/40mm thick for Shelf, Cupboard and Kitchen top including cost and conveyance of all materials and labour charges etc., complete |
| 29 | Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T W Clamps, Plug, Shoes, bend, Screws, nails etc., complete |
| 30 | Wiring with 2 x 1.5 Sq.mm PVC uncheated SC cu.cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable colour for open Light point & Fan Point SD 18 |
| 31 | Supply and Fixing of Ceiling fan(crompton make) including cost and conveyance of all materials and labour cherges etc complete.Ceiling Fan SD 110 |
| 32 | Supply and fixing of 4'4\\" Flu fitting complete with copper choke and condensor (Data - B) SD 88 |
| 33 | Supply and fixing of 4' 18 W LED tube light SOR -M1211 |
| 34 | Plug point |
| 35 | Service wire (SD 62) |
| 36 | Service wire 2 |
| 37 | Supplying & Fixing in position of baby friendly Water closet of approved quality including cost and conveance of all etc., complete |
| 38 | Supplying & Fixing in position of European Water closet of approved quality including cost and conveance of all etc., complete |
| 39 | Provision for Rain water harvesting sturucture (1 Nos) |
| 40 | Provision for painting cartoons / BaLA in hall |
| 41 | Provision for 1000 litres water tank |
| 42 | Provision for pipeline & sanitary fittings arrangements |
| 43 | Provision for Name board |
| 44 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 11, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender