Public Administrative Department Government Departments Closing in 2 days TDR #58490641

Tender For Annual Plan-Balal Gp periodical renewal No:166/2026-27-Renovation Of Maruthom Unnathi Community Hall-General Civil Work

Issued by Government Departments · Kasaragod, Kerala
Tender Value
4.23 Lakhs
Estimated cost
Bid Submission
21 Nov 2026
2 days left
EMD
10584
Bank guarantee accepted
Document Fee
935
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kasaragod → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Annual Plan-Balal Gp periodical renewal No:166/2026-27-Renovation Of Maruthom Unnathi Community Hall-General Civil Work

BOQ

Name of Work:- Annual Plan-Balal GP PR No:166/2026-27-Renovation of Maruthom Unnathi Community hall-General Civil Work
Sl. No. Item Description
1Maintenance
2OD203026/2026-2027:steel work for purling/angle sectionwith MS tubular (round,square or rectangular hollow tubesetc.)including cutting, hoisting, fixing in position and applying a primimg coat ofapproved steelprimer, including welding and bolted with special shaped washers etc. complete.
312.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
412.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
5OD203269/2026-2027:Supplying and fixing 150mm dia pvc rain water gutter semi circular section circular includingfitting with MS flat supporters at 1m interval etc.complete
612.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
715.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
813.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
914.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
1013.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
1113.82.1:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.One coat
1213.111.2:Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).
1321.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
1421.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
1521.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
169.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
17OD208507/2026-2027:Laterite masonry with neatly dressed laterite stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
1813.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58490641
AUTHORITY Government Departments
TENDER VALUE 4.23 Lakhs
LAST DATE 21-11-2026
Authority
Authority Name Local Self Government Department
Work Description Tender for Annual Plan-Balal Gp periodical renewal No:166/2026-27-Renovation Of Maruthom Unnathi Community Hall-General Civil Work
Basic Detail
Tender No AE/LSGD/BGP/TEN/01/26-27
Bidding Type Tender
Location
City Kasaragod
State Kerala
Key Dates
Publish Date 12 Nov 2026
Submission Date 21 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 4.23 Lakhs
Tender Fee 935
EMD 10584
Exemption Available
Document List
303d5efd-6748-42ae-861f-ee4cc305de03.html
Affidavit.pdf
BOQ_1511873.xls
FOT.pdf
PA.pdf
SBD.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 21, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

303d5efd-6748-42ae-861f-ee4cc305de03.html

pdf

Affidavit.pdf

xls

BOQ_1511873.xls

pdf

FOT.pdf

pdf

PA.pdf

pdf

SBD.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender